The identification assigned to tunnels so that sessions could be grouped into different tunnels based on this Id. This Id only has local significance and is not transmited to the remote tunnel-endpoint.
Parsed from file mibinet.mib.txt
Company: None
Module: ASCEND-MIBINTERNETPROFILE-MIB
The identification assigned to tunnels so that sessions could be grouped into different tunnels based on this Id. This Id only has local significance and is not transmited to the remote tunnel-endpoint.
Parsed from file ASCEND-MIBINET-MIB.mib
Module: ASCEND-MIBINET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBINET-MIB
[Automatically extracted from oidview.com]
internetProfile__tunnel_options__assignment_id OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The identification assigned to tunnels so that sessions could be grouped into different tunnels based on this Id. This Id only has local significance and is not transmited to the remote tunnel-endpoint." ::= { mibinternetProfileEntry 418 }
internetProfile-TunnelOptions-AssignmentId OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The identification assigned to tunnels so that sessions could be grouped into different tunnels based on this Id. This Id only has local significance and is not transmited to the remote tunnel-endpoint." ::= { mibinternetProfileEntry 418 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.529.23.1.1.1.368 | internetProfile-HdlcNrmOptions-AsyncDrop, internetProfile__hdlc_nrm_options__async_drop | 0 | 0 | Drop Async I-frames (Yes) or process (No). |
| 1.3.6.1.4.1.529.23.1.1.1.369 | internetProfile-AtmConnectOptions-VcFaultManagement, internetProfile__atm_connect_options__vc_fault_management | 0 | 0 | The VC fault management function to be used for this VC. |
| 1.3.6.1.4.1.529.23.1.1.1.370 | internetProfile-AtmConnectOptions-VcMaxLoopbackCellLoss, internetProfile__atm_connect_options__vc_max_loopback_cell_loss | 0 | 0 | The maximum number of consecutive cell loopback failures before the call is disconnected. |
| 1.3.6.1.4.1.529.23.1.1.1.379 | internetProfile-AtmConnectOptions-Fr08Mode, internetProfile__atm_connect_options__fr_08_mode | 0 | 0 | The FR-08 transparent mode |
| 1.3.6.1.4.1.529.23.1.1.1.380 | internetProfile-MppOptions-X25chanTargetUtilization, internetProfile__mpp_options__x25chan_target_utilization | 0 | 0 | The default value for the X25 channel target utilization. Bandwidth changes occur when the average utilization exceeds or falls… |
| 1.3.6.1.4.1.529.23.1.1.1.381 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-NumberingPlan, internetProfile__atm_options__svc_options__incoming_caller_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.382 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-E164NativeAddress, internetProfile__atm_options__svc_options__incoming_caller_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.383 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-Format, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.384 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Afi, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.385 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Idi, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.386 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-HoDsp, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.387 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Esi, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.388 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Sel, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.389 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-NumberingPlan, internetProfile__atm_options__svc_options__outgoing_called_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.390 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-E164NativeAddress, internetProfile__atm_options__svc_options__outgoing_called_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.391 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-Format, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.392 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Afi, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.393 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Idi, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.394 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-HoDsp, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.395 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Esi, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.396 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Sel, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.397 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-NumberingPlan, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.398 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-E164NativeAddress, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.399 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-Format, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.400 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Afi, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.401 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Idi, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.402 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-HoDsp, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.403 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Esi, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.404 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Sel, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.405 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-NumberingPlan, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.406 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-E164NativeAddress, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.407 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-Format, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.408 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Afi, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.409 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Idi, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.410 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-HoDsp, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.411 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Esi, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.412 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Sel, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.413 | internetProfile-TunnelOptions-ClientAuthId, internetProfile__tunnel_options__client_auth_id | 0 | 0 | The system name used by the Tunnel Initiator during Tunnel establishment for the purposes of tunnel authentication. This is dif… |
| 1.3.6.1.4.1.529.23.1.1.1.414 | internetProfile-SessionOptions-CirTimer, internetProfile__session_options__cir_timer | 0 | 0 | The CIR timer in (milli-sec). |
| 1.3.6.1.4.1.529.23.1.1.1.415 | internetProfile-SessionOptions-Priority, internetProfile__session_options__priority | 0 | 0 | Priority of the link |
| 1.3.6.1.4.1.529.23.1.1.1.416 | internetProfile-HdlcNrmOptions-StationPollAddress, internetProfile__hdlc_nrm_options__station_poll_address | 0 | 0 | Secondary station address to use for SNRM polling |
| 1.3.6.1.4.1.529.23.1.1.1.417 | internetProfile-TunnelOptions-ServerAuthId, internetProfile__tunnel_options__server_auth_id | 0 | 0 | The system name used by the Tunnel Terminator during Tunnel establishment for the purposes of tunnel authentication. This is di… |
| 1.3.6.1.4.1.529.23.1.1.1.419 | internetProfile-IpOptions-NatProfileName, internetProfile__ip_options__nat_profile_name | 0 | 0 | The profile to use for NAT translations on this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.420 | internetProfile-AutoProfiles, internetProfile__auto_profiles | 0 | 0 | This parameter enables or disables automatic profile creation. Currently only the Stinger IDSL provides this capability for PPP… |
| 1.3.6.1.4.1.529.23.1.1.1.421 | internetProfile-IpOptions-AddressRealm, internetProfile__ip_options__address_realm | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.1.1.1.422 | internetProfile-PppOptions-PppCircuit, internetProfile__ppp_options__ppp_circuit | 0 | 0 | PPP Circuit. Set to type to enable the PPP Circuit Mode. |
| 1.3.6.1.4.1.529.23.1.1.1.423 | internetProfile-PppOptions-PppCircuitName, internetProfile__ppp_options__ppp_circuit_name | 0 | 0 | The peer datalink identifier for a PPP circuit. |
| 1.3.6.1.4.1.529.23.1.1.1.424 | internetProfile-X32Options-X32ApplMode, internetProfile__x32_options__x32_appl_mode | 0 | 0 | Appl mode for this interface |
| 1.3.6.1.4.1.529.23.1.1.1.425 | internetProfile-CrossConnectIndex, internetProfile__cross_connect_index | 0 | 0 | AToM Mib cross connect index. |
| 1.3.6.1.4.1.529.23.1.1.1.426 | internetProfile-AtmOptions-CastType, internetProfile__atm_options__cast_type | 0 | 0 | The connection topology type. |
| 1.3.6.1.4.1.529.23.1.1.1.427 | internetProfile-AtmOptions-ConnKind, internetProfile__atm_options__conn_kind | 0 | 0 | The use of call control. |
| 1.3.6.1.4.1.529.23.1.1.1.428 | internetProfile-AtmOptions-TargetAtmAddress, internetProfile__atm_options__target_atm_address | 0 | 0 | The target ATM Address of this Soft PVcc or PVpc. |
| 1.3.6.1.4.1.529.23.1.1.1.429 | internetProfile-AtmOptions-TargetSelect, internetProfile__atm_options__target_select | 0 | 0 | Indicates whether the target VPI/VCI values are to be used at the destination. |
| 1.3.6.1.4.1.529.23.1.1.1.430 | internetProfile-AtmOptions-TargetVpi, internetProfile__atm_options__target_vpi | 0 | 0 | Target VPI. |
| 1.3.6.1.4.1.529.23.1.1.1.431 | internetProfile-AtmOptions-TargetVci, internetProfile__atm_options__target_vci | 0 | 0 | Target VCI. |
| 1.3.6.1.4.1.529.23.1.1.1.432 | internetProfile-AtmOptions-AtmCircuitProfile, internetProfile__atm_options__atm_circuit_profile | 0 | 0 | The atm circuit profile name to be used for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.433 | internetProfile-AtmConnectOptions-CastType, internetProfile__atm_connect_options__cast_type | 0 | 0 | The connection topology type. |
| 1.3.6.1.4.1.529.23.1.1.1.434 | internetProfile-AtmConnectOptions-ConnKind, internetProfile__atm_connect_options__conn_kind | 0 | 0 | The use of call control. |
| 1.3.6.1.4.1.529.23.1.1.1.435 | internetProfile-AtmConnectOptions-TargetAtmAddress, internetProfile__atm_connect_options__target_atm_address | 0 | 0 | The target ATM Address of this Soft PVcc or PVpc. |
| 1.3.6.1.4.1.529.23.1.1.1.436 | internetProfile-AtmConnectOptions-TargetSelect, internetProfile__atm_connect_options__target_select | 0 | 0 | Indicates whether the target VPI/VCI values are to be used at the destination. |
| 1.3.6.1.4.1.529.23.1.1.1.437 | internetProfile-AtmConnectOptions-TargetVpi, internetProfile__atm_connect_options__target_vpi | 0 | 0 | Target VPI. |
| 1.3.6.1.4.1.529.23.1.1.1.438 | internetProfile-AtmConnectOptions-TargetVci, internetProfile__atm_connect_options__target_vci | 0 | 0 | Target VCI. |
| 1.3.6.1.4.1.529.23.1.1.1.439 | internetProfile-AtmConnectOptions-AtmCircuitProfile, internetProfile__atm_connect_options__atm_circuit_profile | 0 | 0 | The atm circuit profile name to be used for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.440 | internetProfile-AtmAalOptions-AalEnabled, internetProfile__atm_aal_options__aal_enabled | 0 | 0 | Enable the AAl options |
| 1.3.6.1.4.1.529.23.1.1.1.441 | internetProfile-AtmAalOptions-AalType, internetProfile__atm_aal_options__aal_type | 0 | 0 | ATM Adaptation Layer type |
| 1.3.6.1.4.1.529.23.1.1.1.442 | internetProfile-AtmAalOptions-TransmitSduSize, internetProfile__atm_aal_options__transmit_sdu_size | 0 | 0 | Size of the trasmitt Service Data Unit in octets. |
| 1.3.6.1.4.1.529.23.1.1.1.443 | internetProfile-AtmAalOptions-ReceiveSduSize, internetProfile__atm_aal_options__receive_sdu_size | 0 | 0 | Size of the receive Service Data Unit in octets. |
| 1.3.6.1.4.1.529.23.1.1.1.444 | internetProfile-ConnUser, internetProfile__conn_user | 0 | 0 | Connetion User type . |
| 1.3.6.1.4.1.529.23.1.1.1.445 | internetProfile__atm_options__oam_support_f4 | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.446 | internetProfile__atm_connect_options__oam_support_f4 | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.448 | internetProfile-AtmOptions-SpvcRetryInterval | 0 | 0 | Period to wait before attempting to establish SPVC after the first SPVC setup failure. 0 indicates no retry |
| 1.3.6.1.4.1.529.23.1.1.1.449 | internetProfile-AtmOptions-SpvcRetryThreshold | 0 | 0 | The number of consecutive call setup attempts for the SPVC to fail before the call failure is declared. 0 indicates infinite nu… |
| 1.3.6.1.4.1.529.23.1.1.1.450 | internetProfile-AtmOptions-SpvcRetryLimit | 0 | 0 | Maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the co… |
| 1.3.6.1.4.1.529.23.1.1.1.451 | internetProfile-AtmOptions-OamAisF5 | 0 | 0 | Disable/Enable sending OAM AIS F5 cells when pvc is down. |
| 1.3.6.1.4.1.529.23.1.1.1.452 | internetProfile-AtmOptions-OamSupport | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.453 | internetProfile-AtmConnectOptions-SpvcRetryInterval | 0 | 0 | Period to wait before attempting to establish SPVC after the first SPVC setup failure. 0 indicates no retry |
| 1.3.6.1.4.1.529.23.1.1.1.454 | internetProfile-AtmConnectOptions-SpvcRetryThreshold | 0 | 0 | The number of consecutive call setup attempts for the SPVC to fail before the call failure is declared. 0 indicates infinite nu… |
| 1.3.6.1.4.1.529.23.1.1.1.455 | internetProfile-AtmConnectOptions-SpvcRetryLimit | 0 | 0 | Maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the co… |
| 1.3.6.1.4.1.529.23.1.1.1.456 | internetProfile-AtmConnectOptions-OamAisF5 | 0 | 0 | Disable/Enable sending OAM AIS F5 cells when pvc is down. |
| 1.3.6.1.4.1.529.23.1.1.1.457 | internetProfile-AtmConnectOptions-OamSupport | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.458 | internetProfile-ModemOnHoldTimeout | 0 | 0 | The allowable Modem-on-Hold timeout values. |
| 1.3.6.1.4.1.529.23.1.1.1.459 | internetProfile-IpOptions-TosOptions-MarkingType | 0 | 0 | Select type of packet marking. |
| 1.3.6.1.4.1.529.23.1.1.1.460 | internetProfile-IpOptions-TosOptions-Dscp | 0 | 0 | DSCP tag to be used in marking of the packets (if marking-type = dscp). |
| 1.3.6.1.4.1.529.23.1.1.1.461 | internetProfile-X25Options-RemoteX25Address | 0 | 0 | X.25 address of remote station. |
| 1.3.6.1.4.1.529.23.1.1.1.462 | internetProfile-X25Options-AnswerX25Address | 0 | 0 | Answer number: mandatory if call mode is incoming or both. |
| 1.3.6.1.4.1.529.23.1.1.1.463 | internetProfile-X25Options-Windowsize | 0 | 0 | Window size requested on outgoing X.25 calls. |
| 1.3.6.1.4.1.529.23.1.1.1.464 | internetProfile-X25Options-Packetsize | 0 | 0 | Packet size requested on outgoing X.25 calls. |
| 1.3.6.1.4.1.529.23.1.1.1.465 | internetProfile-MaxSharedUsers | 0 | 0 | Limits the maximum number of end users allowed to connect using a shared connection profile. The default value is 0 which means… |
| 1.3.6.1.4.1.529.23.1.1.1.468 | internetProfile-AtmOptions-Mtu | 0 | 0 | The maximum packet size (excluding LLC encapsulation if used) that can be transmitted to a remote peer without performing fragm… |
| ... | ||||