The profile to use for NAT translations on this connection.
Parsed from file mibinet.mib.txt
Company: None
Module: ASCEND-MIBINTERNETPROFILE-MIB
The profile to use for NAT translations on this connection.
Parsed from file ASCEND-MIBINET-MIB.mib
Module: ASCEND-MIBINET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBINET-MIB
[Automatically extracted from oidview.com]
internetProfile__ip_options__nat_profile_name OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The profile to use for NAT translations on this connection." ::= { mibinternetProfileEntry 419 }
internetProfile-IpOptions-NatProfileName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The profile to use for NAT translations on this connection." ::= { mibinternetProfileEntry 419 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.529.23.1.1.1.369 | internetProfile-AtmConnectOptions-VcFaultManagement, internetProfile__atm_connect_options__vc_fault_management | 0 | 0 | The VC fault management function to be used for this VC. |
| 1.3.6.1.4.1.529.23.1.1.1.370 | internetProfile-AtmConnectOptions-VcMaxLoopbackCellLoss, internetProfile__atm_connect_options__vc_max_loopback_cell_loss | 0 | 0 | The maximum number of consecutive cell loopback failures before the call is disconnected. |
| 1.3.6.1.4.1.529.23.1.1.1.379 | internetProfile-AtmConnectOptions-Fr08Mode, internetProfile__atm_connect_options__fr_08_mode | 0 | 0 | The FR-08 transparent mode |
| 1.3.6.1.4.1.529.23.1.1.1.380 | internetProfile-MppOptions-X25chanTargetUtilization, internetProfile__mpp_options__x25chan_target_utilization | 0 | 0 | The default value for the X25 channel target utilization. Bandwidth changes occur when the average utilization exceeds or falls… |
| 1.3.6.1.4.1.529.23.1.1.1.381 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-NumberingPlan, internetProfile__atm_options__svc_options__incoming_caller_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.382 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-E164NativeAddress, internetProfile__atm_options__svc_options__incoming_caller_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.383 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-Format, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.384 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Afi, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.385 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Idi, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.386 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-HoDsp, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.387 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Esi, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.388 | internetProfile-AtmOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Sel, internetProfile__atm_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.389 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-NumberingPlan, internetProfile__atm_options__svc_options__outgoing_called_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.390 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-E164NativeAddress, internetProfile__atm_options__svc_options__outgoing_called_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.391 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-Format, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.392 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Afi, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.393 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Idi, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.394 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-HoDsp, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.395 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Esi, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.396 | internetProfile-AtmOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Sel, internetProfile__atm_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.397 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-NumberingPlan, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.398 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-E164NativeAddress, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.399 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-Format, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.400 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Afi, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.401 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-IdpPortion-Idi, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.402 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-HoDsp, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.403 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Esi, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.404 | internetProfile-AtmConnectOptions-SvcOptions-IncomingCallerAddr-AesaAddress-DspPortion-Sel, internetProfile__atm_connect_options__svc_options__incoming_caller_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.405 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-NumberingPlan, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__numbering_plan | 0 | 0 | Numbering plan for an SVC address |
| 1.3.6.1.4.1.529.23.1.1.1.406 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-E164NativeAddress, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__e164_native_address | 0 | 0 | An SVC address in a native E.164 format. |
| 1.3.6.1.4.1.529.23.1.1.1.407 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-Format, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__format | 0 | 0 | An AESA address format used to define this SVC address. |
| 1.3.6.1.4.1.529.23.1.1.1.408 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Afi, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__idp_portion__afi | 0 | 0 | An Authority and Format Identifier(AFI) for AESA address. Must be defined for every AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.409 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-IdpPortion-Idi, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__idp_portion__idi | 0 | 0 | An Initial Domain Identifier (IDI) portion of the AESA address. |
| 1.3.6.1.4.1.529.23.1.1.1.410 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-HoDsp, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__ho_dsp | 0 | 0 | A High-Order Domain-Specific Part of AESA address. The IDP portion determine the format of the HO-DSP. |
| 1.3.6.1.4.1.529.23.1.1.1.411 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Esi, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__esi | 0 | 0 | An End System Identifier (ESI) which uniquely identifies the end system within the specified subnetwork. |
| 1.3.6.1.4.1.529.23.1.1.1.412 | internetProfile-AtmConnectOptions-SvcOptions-OutgoingCalledAddr-AesaAddress-DspPortion-Sel, internetProfile__atm_connect_options__svc_options__outgoing_called_addr__aesa_address__dsp_portion__sel | 0 | 0 | A selector (SEL) field that may be used by the end system. |
| 1.3.6.1.4.1.529.23.1.1.1.413 | internetProfile-TunnelOptions-ClientAuthId, internetProfile__tunnel_options__client_auth_id | 0 | 0 | The system name used by the Tunnel Initiator during Tunnel establishment for the purposes of tunnel authentication. This is dif… |
| 1.3.6.1.4.1.529.23.1.1.1.414 | internetProfile-SessionOptions-CirTimer, internetProfile__session_options__cir_timer | 0 | 0 | The CIR timer in (milli-sec). |
| 1.3.6.1.4.1.529.23.1.1.1.415 | internetProfile-SessionOptions-Priority, internetProfile__session_options__priority | 0 | 0 | Priority of the link |
| 1.3.6.1.4.1.529.23.1.1.1.416 | internetProfile-HdlcNrmOptions-StationPollAddress, internetProfile__hdlc_nrm_options__station_poll_address | 0 | 0 | Secondary station address to use for SNRM polling |
| 1.3.6.1.4.1.529.23.1.1.1.417 | internetProfile-TunnelOptions-ServerAuthId, internetProfile__tunnel_options__server_auth_id | 0 | 0 | The system name used by the Tunnel Terminator during Tunnel establishment for the purposes of tunnel authentication. This is di… |
| 1.3.6.1.4.1.529.23.1.1.1.418 | internetProfile-TunnelOptions-AssignmentId, internetProfile__tunnel_options__assignment_id | 0 | 0 | The identification assigned to tunnels so that sessions could be grouped into different tunnels based on this Id. This Id only … |
| 1.3.6.1.4.1.529.23.1.1.1.420 | internetProfile-AutoProfiles, internetProfile__auto_profiles | 0 | 0 | This parameter enables or disables automatic profile creation. Currently only the Stinger IDSL provides this capability for PPP… |
| 1.3.6.1.4.1.529.23.1.1.1.421 | internetProfile-IpOptions-AddressRealm, internetProfile__ip_options__address_realm | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.1.1.1.422 | internetProfile-PppOptions-PppCircuit, internetProfile__ppp_options__ppp_circuit | 0 | 0 | PPP Circuit. Set to type to enable the PPP Circuit Mode. |
| 1.3.6.1.4.1.529.23.1.1.1.423 | internetProfile-PppOptions-PppCircuitName, internetProfile__ppp_options__ppp_circuit_name | 0 | 0 | The peer datalink identifier for a PPP circuit. |
| 1.3.6.1.4.1.529.23.1.1.1.424 | internetProfile-X32Options-X32ApplMode, internetProfile__x32_options__x32_appl_mode | 0 | 0 | Appl mode for this interface |
| 1.3.6.1.4.1.529.23.1.1.1.425 | internetProfile-CrossConnectIndex, internetProfile__cross_connect_index | 0 | 0 | AToM Mib cross connect index. |
| 1.3.6.1.4.1.529.23.1.1.1.426 | internetProfile-AtmOptions-CastType, internetProfile__atm_options__cast_type | 0 | 0 | The connection topology type. |
| 1.3.6.1.4.1.529.23.1.1.1.427 | internetProfile-AtmOptions-ConnKind, internetProfile__atm_options__conn_kind | 0 | 0 | The use of call control. |
| 1.3.6.1.4.1.529.23.1.1.1.428 | internetProfile-AtmOptions-TargetAtmAddress, internetProfile__atm_options__target_atm_address | 0 | 0 | The target ATM Address of this Soft PVcc or PVpc. |
| 1.3.6.1.4.1.529.23.1.1.1.429 | internetProfile-AtmOptions-TargetSelect, internetProfile__atm_options__target_select | 0 | 0 | Indicates whether the target VPI/VCI values are to be used at the destination. |
| 1.3.6.1.4.1.529.23.1.1.1.430 | internetProfile-AtmOptions-TargetVpi, internetProfile__atm_options__target_vpi | 0 | 0 | Target VPI. |
| 1.3.6.1.4.1.529.23.1.1.1.431 | internetProfile-AtmOptions-TargetVci, internetProfile__atm_options__target_vci | 0 | 0 | Target VCI. |
| 1.3.6.1.4.1.529.23.1.1.1.432 | internetProfile-AtmOptions-AtmCircuitProfile, internetProfile__atm_options__atm_circuit_profile | 0 | 0 | The atm circuit profile name to be used for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.433 | internetProfile-AtmConnectOptions-CastType, internetProfile__atm_connect_options__cast_type | 0 | 0 | The connection topology type. |
| 1.3.6.1.4.1.529.23.1.1.1.434 | internetProfile-AtmConnectOptions-ConnKind, internetProfile__atm_connect_options__conn_kind | 0 | 0 | The use of call control. |
| 1.3.6.1.4.1.529.23.1.1.1.435 | internetProfile-AtmConnectOptions-TargetAtmAddress, internetProfile__atm_connect_options__target_atm_address | 0 | 0 | The target ATM Address of this Soft PVcc or PVpc. |
| 1.3.6.1.4.1.529.23.1.1.1.436 | internetProfile-AtmConnectOptions-TargetSelect, internetProfile__atm_connect_options__target_select | 0 | 0 | Indicates whether the target VPI/VCI values are to be used at the destination. |
| 1.3.6.1.4.1.529.23.1.1.1.437 | internetProfile-AtmConnectOptions-TargetVpi, internetProfile__atm_connect_options__target_vpi | 0 | 0 | Target VPI. |
| 1.3.6.1.4.1.529.23.1.1.1.438 | internetProfile-AtmConnectOptions-TargetVci, internetProfile__atm_connect_options__target_vci | 0 | 0 | Target VCI. |
| 1.3.6.1.4.1.529.23.1.1.1.439 | internetProfile-AtmConnectOptions-AtmCircuitProfile, internetProfile__atm_connect_options__atm_circuit_profile | 0 | 0 | The atm circuit profile name to be used for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.440 | internetProfile-AtmAalOptions-AalEnabled, internetProfile__atm_aal_options__aal_enabled | 0 | 0 | Enable the AAl options |
| 1.3.6.1.4.1.529.23.1.1.1.441 | internetProfile-AtmAalOptions-AalType, internetProfile__atm_aal_options__aal_type | 0 | 0 | ATM Adaptation Layer type |
| 1.3.6.1.4.1.529.23.1.1.1.442 | internetProfile-AtmAalOptions-TransmitSduSize, internetProfile__atm_aal_options__transmit_sdu_size | 0 | 0 | Size of the trasmitt Service Data Unit in octets. |
| 1.3.6.1.4.1.529.23.1.1.1.443 | internetProfile-AtmAalOptions-ReceiveSduSize, internetProfile__atm_aal_options__receive_sdu_size | 0 | 0 | Size of the receive Service Data Unit in octets. |
| 1.3.6.1.4.1.529.23.1.1.1.444 | internetProfile-ConnUser, internetProfile__conn_user | 0 | 0 | Connetion User type . |
| 1.3.6.1.4.1.529.23.1.1.1.445 | internetProfile__atm_options__oam_support_f4 | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.446 | internetProfile__atm_connect_options__oam_support_f4 | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.448 | internetProfile-AtmOptions-SpvcRetryInterval | 0 | 0 | Period to wait before attempting to establish SPVC after the first SPVC setup failure. 0 indicates no retry |
| 1.3.6.1.4.1.529.23.1.1.1.449 | internetProfile-AtmOptions-SpvcRetryThreshold | 0 | 0 | The number of consecutive call setup attempts for the SPVC to fail before the call failure is declared. 0 indicates infinite nu… |
| 1.3.6.1.4.1.529.23.1.1.1.450 | internetProfile-AtmOptions-SpvcRetryLimit | 0 | 0 | Maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the co… |
| 1.3.6.1.4.1.529.23.1.1.1.451 | internetProfile-AtmOptions-OamAisF5 | 0 | 0 | Disable/Enable sending OAM AIS F5 cells when pvc is down. |
| 1.3.6.1.4.1.529.23.1.1.1.452 | internetProfile-AtmOptions-OamSupport | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.453 | internetProfile-AtmConnectOptions-SpvcRetryInterval | 0 | 0 | Period to wait before attempting to establish SPVC after the first SPVC setup failure. 0 indicates no retry |
| 1.3.6.1.4.1.529.23.1.1.1.454 | internetProfile-AtmConnectOptions-SpvcRetryThreshold | 0 | 0 | The number of consecutive call setup attempts for the SPVC to fail before the call failure is declared. 0 indicates infinite nu… |
| 1.3.6.1.4.1.529.23.1.1.1.455 | internetProfile-AtmConnectOptions-SpvcRetryLimit | 0 | 0 | Maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the co… |
| 1.3.6.1.4.1.529.23.1.1.1.456 | internetProfile-AtmConnectOptions-OamAisF5 | 0 | 0 | Disable/Enable sending OAM AIS F5 cells when pvc is down. |
| 1.3.6.1.4.1.529.23.1.1.1.457 | internetProfile-AtmConnectOptions-OamSupport | 0 | 0 | Is F4 OAM supported? It is used only when vp-switching is yes. The Stinger system can only support F4 OAM for 50 VPC segments i… |
| 1.3.6.1.4.1.529.23.1.1.1.458 | internetProfile-ModemOnHoldTimeout | 0 | 0 | The allowable Modem-on-Hold timeout values. |
| 1.3.6.1.4.1.529.23.1.1.1.459 | internetProfile-IpOptions-TosOptions-MarkingType | 0 | 0 | Select type of packet marking. |
| 1.3.6.1.4.1.529.23.1.1.1.460 | internetProfile-IpOptions-TosOptions-Dscp | 0 | 0 | DSCP tag to be used in marking of the packets (if marking-type = dscp). |
| 1.3.6.1.4.1.529.23.1.1.1.461 | internetProfile-X25Options-RemoteX25Address | 0 | 0 | X.25 address of remote station. |
| 1.3.6.1.4.1.529.23.1.1.1.462 | internetProfile-X25Options-AnswerX25Address | 0 | 0 | Answer number: mandatory if call mode is incoming or both. |
| 1.3.6.1.4.1.529.23.1.1.1.463 | internetProfile-X25Options-Windowsize | 0 | 0 | Window size requested on outgoing X.25 calls. |
| 1.3.6.1.4.1.529.23.1.1.1.464 | internetProfile-X25Options-Packetsize | 0 | 0 | Packet size requested on outgoing X.25 calls. |
| 1.3.6.1.4.1.529.23.1.1.1.465 | internetProfile-MaxSharedUsers | 0 | 0 | Limits the maximum number of end users allowed to connect using a shared connection profile. The default value is 0 which means… |
| 1.3.6.1.4.1.529.23.1.1.1.468 | internetProfile-AtmOptions-Mtu | 0 | 0 | The maximum packet size (excluding LLC encapsulation if used) that can be transmitted to a remote peer without performing fragm… |
| 1.3.6.1.4.1.529.23.1.1.1.469 | internetProfile-AtmConnectOptions-Mtu | 0 | 0 | The maximum packet size (excluding LLC encapsulation if used) that can be transmitted to a remote peer without performing fragm… |
| ... | ||||