Selects the IPX spoofing mode when bridging.
Parsed from file mibinet.mib.txt
Company: None
Module: ASCEND-MIBINTERNETPROFILE-MIB
Selects the IPX spoofing mode when bridging.
Parsed from file ASCEND-MIBINET-MIB.mib
Module: ASCEND-MIBINET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBINET-MIB
[Automatically extracted from oidview.com]
internetProfile__ipx_options__ipx_spoofing OBJECT-TYPE SYNTAX INTEGER { none (1), client_spoofing (2), server_spoofing (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Selects the IPX spoofing mode when bridging." ::= { mibinternetProfileEntry 58 }
internetProfile-IpxOptions-IpxSpoofing OBJECT-TYPE SYNTAX INTEGER { none (1), clientSpoofing (2), serverSpoofing (3) } ACCESS read-write STATUS mandatory DESCRIPTION "Selects the IPX spoofing mode when bridging." ::= { mibinternetProfileEntry 58 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.529.23.1.1.1.8 | internetProfile-IpOptions-VjHeaderPrediction, internetProfile__ip_options__vj_header_prediction | 0 | 0 | Enable/disable Van Jacabson TCP Header prediction processing on this connection if supported by the selected encapsulation prot… |
| 1.3.6.1.4.1.529.23.1.1.1.9 | internetProfile-IpOptions-RemoteAddress, internetProfile__ip_options__remote_address | 0 | 0 | The remote address with netmask of the named host. |
| 1.3.6.1.4.1.529.23.1.1.1.10 | internetProfile-IpOptions-NetmaskRemote, internetProfile__ip_options__netmask_remote | 0 | 0 | The netmask of the remote address. |
| 1.3.6.1.4.1.529.23.1.1.1.11 | internetProfile-IpOptions-LocalAddress, internetProfile__ip_options__local_address | 0 | 0 | The interface address with netmask, if required, of the local end. If left zero the interface is assumed to be an unnumbered in… |
| 1.3.6.1.4.1.529.23.1.1.1.12 | internetProfile-IpOptions-NetmaskLocal, internetProfile__ip_options__netmask_local | 0 | 0 | The netmask of the local interface address. |
| 1.3.6.1.4.1.529.23.1.1.1.13 | internetProfile-IpOptions-RoutingMetric, internetProfile__ip_options__routing_metric | 0 | 0 | The routing metric, typically measured in number of hops, to be used in the routing table entry created for this connection whe… |
| 1.3.6.1.4.1.529.23.1.1.1.14 | internetProfile-IpOptions-Preference, internetProfile__ip_options__preference | 0 | 0 | The preference used for comparing this route to other routes. Preference has a higher priority than metric. As with the metric … |
| 1.3.6.1.4.1.529.23.1.1.1.15 | internetProfile-IpOptions-DownPreference, internetProfile__ip_options__down_preference | 0 | 0 | The preference used for comparing the down-metric route to other routes. Preference has a higher priority than metric. As with … |
| 1.3.6.1.4.1.529.23.1.1.1.16 | internetProfile-IpOptions-PrivateRoute, internetProfile__ip_options__private_route | 0 | 0 | Enable/disable distribution of the route created for this connection via routing protocols. Private routes are used internally,… |
| 1.3.6.1.4.1.529.23.1.1.1.17 | internetProfile-IpOptions-MulticastAllowed, internetProfile__ip_options__multicast_allowed | 0 | 0 | Enable this connection as a multicast traffic client. |
| 1.3.6.1.4.1.529.23.1.1.1.18 | internetProfile-IpOptions-AddressPool, internetProfile__ip_options__address_pool | 0 | 0 | The number of the address pool from which an address for this host should be obtained when using assigned addresses. |
| 1.3.6.1.4.1.529.23.1.1.1.19 | internetProfile-IpOptions-IpDirect, internetProfile__ip_options__ip_direct | 0 | 0 | The address of the next-hop when IP direct routing is used. |
| 1.3.6.1.4.1.529.23.1.1.1.20 | internetProfile-IpOptions-Rip, internetProfile__ip_options__rip | 0 | 0 | Specify if RIP or RIP-2 should be used over this connection and if used in both directions or not. |
| 1.3.6.1.4.1.529.23.1.1.1.21 | internetProfile-IpOptions-RouteFilter, internetProfile__ip_options__route_filter | 0 | 0 | The name of this filter. All filters are referenced by name so a name must be assigned to active filters. |
| 1.3.6.1.4.1.529.23.1.1.1.22 | internetProfile-IpOptions-SourceIpCheck, internetProfile__ip_options__source_ip_check | 0 | 0 | Enable/disable source ip checking. Packets with source ip address which doesn't match with negotiated remote ip address will be… |
| 1.3.6.1.4.1.529.23.1.1.1.23 | internetProfile-IpOptions-OspfOptions-Active, internetProfile__ip_options__ospf_options__active | 0 | 0 | Is OSPF active on this interface. |
| 1.3.6.1.4.1.529.23.1.1.1.24 | internetProfile-IpOptions-OspfOptions-Area, internetProfile__ip_options__ospf_options__area | 0 | 0 | The area that this interface belongs to. |
| 1.3.6.1.4.1.529.23.1.1.1.25 | internetProfile-IpOptions-OspfOptions-AreaType, internetProfile__ip_options__ospf_options__area_type | 0 | 0 | The type of Area. Normal, Stub, NSSA |
| 1.3.6.1.4.1.529.23.1.1.1.26 | internetProfile-IpOptions-OspfOptions-HelloInterval, internetProfile__ip_options__ospf_options__hello_interval | 0 | 0 | The hello interval (seconds). |
| 1.3.6.1.4.1.529.23.1.1.1.27 | internetProfile-IpOptions-OspfOptions-DeadInterval, internetProfile__ip_options__ospf_options__dead_interval | 0 | 0 | The dead interval (seconds). |
| 1.3.6.1.4.1.529.23.1.1.1.28 | internetProfile-IpOptions-OspfOptions-Priority, internetProfile__ip_options__ospf_options__priority | 0 | 0 | The priority of this router in DR elections. |
| 1.3.6.1.4.1.529.23.1.1.1.29 | internetProfile-IpOptions-OspfOptions-AuthenType, internetProfile__ip_options__ospf_options__authen_type | 0 | 0 | The type of OSPF authentication in effect. |
| 1.3.6.1.4.1.529.23.1.1.1.30 | internetProfile-IpOptions-OspfOptions-AuthKey, internetProfile__ip_options__ospf_options__auth_key | 0 | 0 | The authentication key. |
| 1.3.6.1.4.1.529.23.1.1.1.31 | internetProfile-IpOptions-OspfOptions-KeyId, internetProfile__ip_options__ospf_options__key_id | 0 | 0 | The key identifier for MD5 authentication. |
| 1.3.6.1.4.1.529.23.1.1.1.32 | internetProfile-IpOptions-OspfOptions-Cost, internetProfile__ip_options__ospf_options__cost | 0 | 0 | The output cost. |
| 1.3.6.1.4.1.529.23.1.1.1.33 | internetProfile-IpOptions-OspfOptions-DownCost, internetProfile__ip_options__ospf_options__down_cost | 0 | 0 | The output cost when the link is physically down but virtually up. |
| 1.3.6.1.4.1.529.23.1.1.1.34 | internetProfile-IpOptions-OspfOptions-AseType, internetProfile__ip_options__ospf_options__ase_type | 0 | 0 | The OSPF ASE type of this LSA. |
| 1.3.6.1.4.1.529.23.1.1.1.35 | internetProfile-IpOptions-OspfOptions-AseTag, internetProfile__ip_options__ospf_options__ase_tag | 0 | 0 | The OSPF ASE tag of this link. |
| 1.3.6.1.4.1.529.23.1.1.1.36 | internetProfile-IpOptions-OspfOptions-TransitDelay, internetProfile__ip_options__ospf_options__transit_delay | 0 | 0 | The estimated transit delay (seconds). |
| 1.3.6.1.4.1.529.23.1.1.1.37 | internetProfile-IpOptions-OspfOptions-RetransmitInterval, internetProfile__ip_options__ospf_options__retransmit_interval | 0 | 0 | The retransmit time (seconds). |
| 1.3.6.1.4.1.529.23.1.1.1.38 | internetProfile-IpOptions-OspfOptions-NonMulticast, internetProfile__ip_options__ospf_options__non_multicast | 0 | 0 | Use direct addresses instead of multicast addresses. |
| 1.3.6.1.4.1.529.23.1.1.1.39 | internetProfile-IpOptions-MulticastRateLimit, internetProfile__ip_options__multicast_rate_limit | 0 | 0 | The multicast rate limit in seconds. |
| 1.3.6.1.4.1.529.23.1.1.1.40 | internetProfile-IpOptions-MulticastGroupLeaveDelay, internetProfile__ip_options__multicast_group_leave_delay | 0 | 0 | The multicast group leave in seconds. This is only for IGMP Version 2 |
| 1.3.6.1.4.1.529.23.1.1.1.41 | internetProfile-IpOptions-ClientDnsPrimaryAddr, internetProfile__ip_options__client_dns_primary_addr | 0 | 0 | User specific DNS Primary Address. |
| 1.3.6.1.4.1.529.23.1.1.1.42 | internetProfile-IpOptions-ClientDnsSecondaryAddr, internetProfile__ip_options__client_dns_secondary_addr | 0 | 0 | User specific DNS Secondary Address. |
| 1.3.6.1.4.1.529.23.1.1.1.43 | internetProfile-IpOptions-ClientDnsAddrAssign, internetProfile__ip_options__client_dns_addr_assign | 0 | 0 | A flag to control assigning user specific DNS Addresses. |
| 1.3.6.1.4.1.529.23.1.1.1.44 | internetProfile-IpOptions-ClientDefaultGateway, internetProfile__ip_options__client_default_gateway | 0 | 0 | The default gateway to be used for traffic from this connection, if no specific route is found in the routing table. If left ze… |
| 1.3.6.1.4.1.529.23.1.1.1.45 | internetProfile-IpOptions-TosOptions-Active, internetProfile__ip_options__tos_options__active | 0 | 0 | Activate type of service for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.46 | internetProfile-IpOptions-TosOptions-Precedence, internetProfile__ip_options__tos_options__precedence | 0 | 0 | Tag the precedence bits (priority bits) in the TOS octet of IP datagram header with this value when match occurs. |
| 1.3.6.1.4.1.529.23.1.1.1.47 | internetProfile-IpOptions-TosOptions-TypeOfService, internetProfile__ip_options__tos_options__type_of_service | 0 | 0 | Tag the type of service field in the TOS octet of IP datagram header with this value when match occurs. |
| 1.3.6.1.4.1.529.23.1.1.1.48 | internetProfile-IpOptions-TosOptions-ApplyTo, internetProfile__ip_options__tos_options__apply_to | 0 | 0 | Define how the type-of-service applies to data flow for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.49 | internetProfile-IpOptions-TosFilter, internetProfile__ip_options__tos_filter | 0 | 0 | The name of type-of-service filter. All filters are referenced by name so a name must be assigned to active filters. |
| 1.3.6.1.4.1.529.23.1.1.1.50 | internetProfile-IpxOptions-IpxRoutingEnabled, internetProfile__ipx_options__ipx_routing_enabled | 0 | 0 | Enable/disable IPX routing for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.51 | internetProfile-IpxOptions-PeerMode, internetProfile__ipx_options__peer_mode | 0 | 0 | Enable/disable full routing between peer or use the pool to assign a network number. |
| 1.3.6.1.4.1.529.23.1.1.1.52 | internetProfile-IpxOptions-Rip, internetProfile__ipx_options__rip | 0 | 0 | This field specifies RIP traffic when peer is a Router. |
| 1.3.6.1.4.1.529.23.1.1.1.53 | internetProfile-IpxOptions-Sap, internetProfile__ipx_options__sap | 0 | 0 | This field specifies SAP traffic when peer is a Router. |
| 1.3.6.1.4.1.529.23.1.1.1.54 | internetProfile-IpxOptions-DialQuery, internetProfile__ipx_options__dial_query | 0 | 0 | Indicate if we should dial to this connection if our SAP table contains no NetWare file servers, and a workstation makes a get-… |
| 1.3.6.1.4.1.529.23.1.1.1.55 | internetProfile-IpxOptions-NetNumber, internetProfile__ipx_options__net_number | 0 | 0 | The network number of the other router. May be zero, if we don't know what it is. |
| 1.3.6.1.4.1.529.23.1.1.1.56 | internetProfile-IpxOptions-NetAlias, internetProfile__ipx_options__net_alias | 0 | 0 | The network number of the point to point link. |
| 1.3.6.1.4.1.529.23.1.1.1.57 | internetProfile-IpxOptions-SapFilter, internetProfile__ipx_options__sap_filter | 0 | 0 | The name of the IPX SAP filter, if any, to use with this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.59 | internetProfile-IpxOptions-SpoofingTimeout, internetProfile__ipx_options__spoofing_timeout | 0 | 0 | IPX NetWare connection timeout value. |
| 1.3.6.1.4.1.529.23.1.1.1.60 | internetProfile-IpxOptions-IpxSapHsProxy, internetProfile__ipx_options__ipx_sap_hs_proxy | 0 | 0 | Use IPX SAP Home Server Proxy. |
| 1.3.6.1.4.1.529.23.1.1.1.61 | internetProfile-IpxOptions-IpxHeaderCompression, internetProfile__ipx_options__ipx_header_compression | 0 | 0 | Use IPX header compression if encapsulation supports it. |
| 1.3.6.1.4.1.529.23.1.1.1.62 | internetProfile-BridgingOptions-BridgingGroup, internetProfile__bridging_options__bridging_group | 0 | 0 | Select the bridging group for this connection. Group 0 disables bridging. All packets not routed will be bridged to interfaces … |
| 1.3.6.1.4.1.529.23.1.1.1.63 | internetProfile-BridgingOptions-DialOnBroadcast, internetProfile__bridging_options__dial_on_broadcast | 0 | 0 | Enable/disable outdial when broadcast frames are received. |
| 1.3.6.1.4.1.529.23.1.1.1.64 | internetProfile-BridgingOptions-IpxSpoofing, internetProfile__bridging_options__ipx_spoofing | 0 | 0 | Selects the IPX spoofing mode when bridging. |
| 1.3.6.1.4.1.529.23.1.1.1.65 | internetProfile-BridgingOptions-SpoofingTimeout, internetProfile__bridging_options__spoofing_timeout | 0 | 0 | IPX NetWare connection timeout value. |
| 1.3.6.1.4.1.529.23.1.1.1.66 | internetProfile-BridgingOptions-BridgeType, internetProfile__bridging_options__bridge_type | 0 | 0 | For the P25 user interface. |
| 1.3.6.1.4.1.529.23.1.1.1.67 | internetProfile-SessionOptions-CallFilter, internetProfile__session_options__call_filter | 0 | 0 | The name of the filter used to determine if a packet should cause the idle timer to be reset or, when the answer profile is use… |
| 1.3.6.1.4.1.529.23.1.1.1.68 | internetProfile-SessionOptions-DataFilter, internetProfile__session_options__data_filter | 0 | 0 | The name of the filter used to determine if packets should be forwarded or dropped. |
| 1.3.6.1.4.1.529.23.1.1.1.69 | internetProfile-SessionOptions-FilterPersistence, internetProfile__session_options__filter_persistence | 0 | 0 | Determines if filters should persist between calls. |
| 1.3.6.1.4.1.529.23.1.1.1.70 | internetProfile-SessionOptions-IdleTimer, internetProfile__session_options__idle_timer | 0 | 0 | The number of seconds of no activity before a call will be dropped. The value 0 disables the idle timer. |
| 1.3.6.1.4.1.529.23.1.1.1.71 | internetProfile-SessionOptions-TsIdleMode, internetProfile__session_options__ts_idle_mode | 0 | 0 | The method used to determine when the terminal server idle session timer is reset. |
| 1.3.6.1.4.1.529.23.1.1.1.72 | internetProfile-SessionOptions-TsIdleTimer, internetProfile__session_options__ts_idle_timer | 0 | 0 | The number of seconds of no activity as defined by the idle mode before a session will be terminated. |
| 1.3.6.1.4.1.529.23.1.1.1.73 | internetProfile-SessionOptions-Backup, internetProfile__session_options__backup | 0 | 0 | Name of the backup connection profile. |
| 1.3.6.1.4.1.529.23.1.1.1.74 | internetProfile-SessionOptions-Secondary, internetProfile__session_options__secondary | 0 | 0 | A secondary internet profile used for dial back-up support. |
| 1.3.6.1.4.1.529.23.1.1.1.75 | internetProfile__session_options__atmp_gateway | 0 | 0 | This profile is an ATMP gateway connection to an mobile client's home network. |
| 1.3.6.1.4.1.529.23.1.1.1.76 | internetProfile-SessionOptions-MaxCallDuration, internetProfile__session_options__max_call_duration | 0 | 0 | The number of minutes of connect time before a call will be dropped. The value 0 disables the connection timer. |
| 1.3.6.1.4.1.529.23.1.1.1.77 | internetProfile-SessionOptions-VtpGateway, internetProfile__session_options__vtp_gateway | 0 | 0 | This profile is an VTP gateway connection to an mobile client's home network. |
| 1.3.6.1.4.1.529.23.1.1.1.78 | internetProfile-SessionOptions-Blockcountlimit, internetProfile__session_options__blockcountlimit | 0 | 0 | Maximum number of failed attempts allowed for connection before blocking the call. |
| 1.3.6.1.4.1.529.23.1.1.1.79 | internetProfile-SessionOptions-Blockduration, internetProfile__session_options__blockduration | 0 | 0 | Number of seconds that connection attempts to non responding network will be blocked before allowing retries. |
| 1.3.6.1.4.1.529.23.1.1.1.80 | internetProfile__session_options__max_atmp_tunnels | 0 | 0 | If this profile is an ATMP gateway, then this parameter specifies the maximum number of ATMP tunnels allowed to the ATMP home n… |
| 1.3.6.1.4.1.529.23.1.1.1.81 | internetProfile-SessionOptions-MaxVtpTunnels, internetProfile__session_options__max_vtp_tunnels | 0 | 0 | If this profile is a VTP gateway, then this parameter specifies the maximum number of VTP tunnels allowed to the VTP home netwo… |
| 1.3.6.1.4.1.529.23.1.1.1.82 | internetProfile-SessionOptions-RedialDelayLimit, internetProfile__session_options__redial_delay_limit | 0 | 0 | Number of seconds delay before allowing a redial |
| 1.3.6.1.4.1.529.23.1.1.1.83 | internetProfile-SessionOptions-SesRateType, internetProfile__session_options__ses_rate_type | 0 | 0 | The per ses rate type. |
| 1.3.6.1.4.1.529.23.1.1.1.84 | internetProfile-SessionOptions-SesRateMode, internetProfile__session_options__ses_rate_mode | 0 | 0 | The per ses rate mode. |
| 1.3.6.1.4.1.529.23.1.1.1.85 | internetProfile-SessionOptions-SesAdslCapUpRate, internetProfile__session_options__ses_adsl_cap_up_rate | 0 | 0 | The per session adsl-cap up stream data rate |
| 1.3.6.1.4.1.529.23.1.1.1.86 | internetProfile-SessionOptions-SesAdslCapDownRate, internetProfile__session_options__ses_adsl_cap_down_rate | 0 | 0 | The per session adsl-cap down stream data rate |
| 1.3.6.1.4.1.529.23.1.1.1.87 | internetProfile-SessionOptions-SesSdslRate, internetProfile__session_options__ses_sdsl_rate | 0 | 0 | The per session symetrical data rate. This parameter does not pertain to the old 16 port sdsl card. |
| 1.3.6.1.4.1.529.23.1.1.1.88 | internetProfile-SessionOptions-SesAdslDmtUpRate, internetProfile__session_options__ses_adsl_dmt_up_rate | 0 | 0 | The per session adsl-dmt up stream data rate |
| 1.3.6.1.4.1.529.23.1.1.1.89 | internetProfile-SessionOptions-SesAdslDmtDownRate, internetProfile__session_options__ses_adsl_dmt_down_rate | 0 | 0 | The per session adsl-dmt down stream data rate |
| 1.3.6.1.4.1.529.23.1.1.1.90 | internetProfile-SessionOptions-RxDataRateLimit, internetProfile__session_options__rx_data_rate_limit | 0 | 0 | The maximum information rate to be received from the named station (kbps). |
| 1.3.6.1.4.1.529.23.1.1.1.91 | internetProfile-SessionOptions-TxDataRateLimit, internetProfile__session_options__tx_data_rate_limit | 0 | 0 | The maximum information rate to be transmitted to the named station (kbps). |
| 1.3.6.1.4.1.529.23.1.1.1.92 | internetProfile-TelcoOptions-AnswerOriginate, internetProfile__telco_options__answer_originate | 0 | 0 | Specifies if this profile can be used for incoming calls, outgoing calls, or both. |
| 1.3.6.1.4.1.529.23.1.1.1.93 | internetProfile-TelcoOptions-Callback, internetProfile__telco_options__callback | 0 | 0 | When true a call received from the named host requires callback security. The number dialed is the phoneNumber from this connec… |
| 1.3.6.1.4.1.529.23.1.1.1.94 | internetProfile-TelcoOptions-CallType, internetProfile__telco_options__call_type | 0 | 0 | Nailed channel usage for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.95 | internetProfile-TelcoOptions-NailedGroups, internetProfile__telco_options__nailed_groups | 0 | 0 | All the nailed groups belonging to a session. MPP supports multiple groups. |
| 1.3.6.1.4.1.529.23.1.1.1.96 | internetProfile-TelcoOptions-Ft1Caller, internetProfile__telco_options__ft1_caller | 0 | 0 | Specifies if this side should initiate calls when a mix of nailed and switched calls are being used. |
| 1.3.6.1.4.1.529.23.1.1.1.97 | internetProfile-TelcoOptions-Force56kbps, internetProfile__telco_options__force_56kbps | 0 | 0 | If yes then inbound 64 kbps calls are connected at 56 kbps. |
| 1.3.6.1.4.1.529.23.1.1.1.98 | internetProfile-TelcoOptions-DataService, internetProfile__telco_options__data_service | 0 | 0 | The type of bearer channel capability to set up for each switched call in the session. |
| 1.3.6.1.4.1.529.23.1.1.1.99 | internetProfile-TelcoOptions-CallByCall, internetProfile__telco_options__call_by_call | 0 | 0 | The call-by-call signaling value for PRI lines. |
| 1.3.6.1.4.1.529.23.1.1.1.100 | internetProfile-TelcoOptions-BillingNumber, internetProfile__telco_options__billing_number | 0 | 0 | A number used for billing purposes. This number, if present, is used as either a 'billing suffix' or the 'calling party number'. |
| 1.3.6.1.4.1.529.23.1.1.1.101 | internetProfile-TelcoOptions-TransitNumber, internetProfile__telco_options__transit_number | 0 | 0 | The string for use in the 'transit network IE' for PRI calling when going through a LEC. |
| 1.3.6.1.4.1.529.23.1.1.1.102 | internetProfile-TelcoOptions-ExpectCallback, internetProfile__telco_options__expect_callback | 0 | 0 | When true we expect calls to the named host will result in a callback from that host. This would occur if the remote host were … |
| 1.3.6.1.4.1.529.23.1.1.1.103 | internetProfile-TelcoOptions-DialoutAllowed, internetProfile__telco_options__dialout_allowed | 0 | 0 | When true, this connection is allowed to use the LAN modems to place outgoing calls. |
| 1.3.6.1.4.1.529.23.1.1.1.104 | internetProfile-TelcoOptions-DelayCallback, internetProfile__telco_options__delay_callback | 0 | 0 | Number of seconds to delay before dialing back. Values of 0-3 seconds are treated as 3 seconds. |
| 1.3.6.1.4.1.529.23.1.1.1.105 | internetProfile-PppOptions-SendAuthMode, internetProfile__ppp_options__send_auth_mode | 0 | 0 | The type of PPP authentication to use for this call. |
| 1.3.6.1.4.1.529.23.1.1.1.106 | internetProfile-PppOptions-SendPassword, internetProfile__ppp_options__send_password | 0 | 0 | This is the password sent to the far end; used for MPP and PPP PAP and CHAP security. |
| 1.3.6.1.4.1.529.23.1.1.1.107 | internetProfile-PppOptions-SubstituteSendName, internetProfile__ppp_options__substitute_send_name | 0 | 0 | Name send to the far end, if different from the global system name. |
| 1.3.6.1.4.1.529.23.1.1.1.108 | internetProfile-PppOptions-RecvPassword, internetProfile__ppp_options__recv_password | 0 | 0 | This is the password received from the far end; used for MPP and PPP PAP and CHAP security. |
| ... | ||||