Nailed channel usage for this connection.
Parsed from file mibinet.mib.txt
Company: None
Module: ASCEND-MIBINTERNETPROFILE-MIB
Nailed channel usage for this connection.
Parsed from file ASCEND-MIBINET-MIB.mib
Module: ASCEND-MIBINET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBINET-MIB
[Automatically extracted from oidview.com]
internetProfile__telco_options__call_type OBJECT-TYPE SYNTAX INTEGER { off (1), ft1 (2), ft1_mpp (3), bri (4), ft1_bo (5), d_chan (6), aodi (7), megamax (8) } ACCESS read-write STATUS mandatory DESCRIPTION "Nailed channel usage for this connection." ::= { mibinternetProfileEntry 94 }
internetProfile-TelcoOptions-CallType OBJECT-TYPE SYNTAX INTEGER { off (1), ft1 (2), ft1Mpp (3), bri (4), ft1Bo (5), dChan (6), aodi (7), megamax (8) } ACCESS read-write STATUS mandatory DESCRIPTION "Nailed channel usage for this connection." ::= { mibinternetProfileEntry 94 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.529.23.1.1.1.44 | internetProfile-IpOptions-ClientDefaultGateway, internetProfile__ip_options__client_default_gateway | 0 | 0 | The default gateway to be used for traffic from this connection, if no specific route is found in the routing table. If left ze… |
| 1.3.6.1.4.1.529.23.1.1.1.45 | internetProfile-IpOptions-TosOptions-Active, internetProfile__ip_options__tos_options__active | 0 | 0 | Activate type of service for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.46 | internetProfile-IpOptions-TosOptions-Precedence, internetProfile__ip_options__tos_options__precedence | 0 | 0 | Tag the precedence bits (priority bits) in the TOS octet of IP datagram header with this value when match occurs. |
| 1.3.6.1.4.1.529.23.1.1.1.47 | internetProfile-IpOptions-TosOptions-TypeOfService, internetProfile__ip_options__tos_options__type_of_service | 0 | 0 | Tag the type of service field in the TOS octet of IP datagram header with this value when match occurs. |
| 1.3.6.1.4.1.529.23.1.1.1.48 | internetProfile-IpOptions-TosOptions-ApplyTo, internetProfile__ip_options__tos_options__apply_to | 0 | 0 | Define how the type-of-service applies to data flow for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.49 | internetProfile-IpOptions-TosFilter, internetProfile__ip_options__tos_filter | 0 | 0 | The name of type-of-service filter. All filters are referenced by name so a name must be assigned to active filters. |
| 1.3.6.1.4.1.529.23.1.1.1.50 | internetProfile-IpxOptions-IpxRoutingEnabled, internetProfile__ipx_options__ipx_routing_enabled | 0 | 0 | Enable/disable IPX routing for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.51 | internetProfile-IpxOptions-PeerMode, internetProfile__ipx_options__peer_mode | 0 | 0 | Enable/disable full routing between peer or use the pool to assign a network number. |
| 1.3.6.1.4.1.529.23.1.1.1.52 | internetProfile-IpxOptions-Rip, internetProfile__ipx_options__rip | 0 | 0 | This field specifies RIP traffic when peer is a Router. |
| 1.3.6.1.4.1.529.23.1.1.1.53 | internetProfile-IpxOptions-Sap, internetProfile__ipx_options__sap | 0 | 0 | This field specifies SAP traffic when peer is a Router. |
| 1.3.6.1.4.1.529.23.1.1.1.54 | internetProfile-IpxOptions-DialQuery, internetProfile__ipx_options__dial_query | 0 | 0 | Indicate if we should dial to this connection if our SAP table contains no NetWare file servers, and a workstation makes a get-… |
| 1.3.6.1.4.1.529.23.1.1.1.55 | internetProfile-IpxOptions-NetNumber, internetProfile__ipx_options__net_number | 0 | 0 | The network number of the other router. May be zero, if we don't know what it is. |
| 1.3.6.1.4.1.529.23.1.1.1.56 | internetProfile-IpxOptions-NetAlias, internetProfile__ipx_options__net_alias | 0 | 0 | The network number of the point to point link. |
| 1.3.6.1.4.1.529.23.1.1.1.57 | internetProfile-IpxOptions-SapFilter, internetProfile__ipx_options__sap_filter | 0 | 0 | The name of the IPX SAP filter, if any, to use with this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.58 | internetProfile-IpxOptions-IpxSpoofing, internetProfile__ipx_options__ipx_spoofing | 0 | 0 | Selects the IPX spoofing mode when bridging. |
| 1.3.6.1.4.1.529.23.1.1.1.59 | internetProfile-IpxOptions-SpoofingTimeout, internetProfile__ipx_options__spoofing_timeout | 0 | 0 | IPX NetWare connection timeout value. |
| 1.3.6.1.4.1.529.23.1.1.1.60 | internetProfile-IpxOptions-IpxSapHsProxy, internetProfile__ipx_options__ipx_sap_hs_proxy | 0 | 0 | Use IPX SAP Home Server Proxy. |
| 1.3.6.1.4.1.529.23.1.1.1.61 | internetProfile-IpxOptions-IpxHeaderCompression, internetProfile__ipx_options__ipx_header_compression | 0 | 0 | Use IPX header compression if encapsulation supports it. |
| 1.3.6.1.4.1.529.23.1.1.1.62 | internetProfile-BridgingOptions-BridgingGroup, internetProfile__bridging_options__bridging_group | 0 | 0 | Select the bridging group for this connection. Group 0 disables bridging. All packets not routed will be bridged to interfaces … |
| 1.3.6.1.4.1.529.23.1.1.1.63 | internetProfile-BridgingOptions-DialOnBroadcast, internetProfile__bridging_options__dial_on_broadcast | 0 | 0 | Enable/disable outdial when broadcast frames are received. |
| 1.3.6.1.4.1.529.23.1.1.1.64 | internetProfile-BridgingOptions-IpxSpoofing, internetProfile__bridging_options__ipx_spoofing | 0 | 0 | Selects the IPX spoofing mode when bridging. |
| 1.3.6.1.4.1.529.23.1.1.1.65 | internetProfile-BridgingOptions-SpoofingTimeout, internetProfile__bridging_options__spoofing_timeout | 0 | 0 | IPX NetWare connection timeout value. |
| 1.3.6.1.4.1.529.23.1.1.1.66 | internetProfile-BridgingOptions-BridgeType, internetProfile__bridging_options__bridge_type | 0 | 0 | For the P25 user interface. |
| 1.3.6.1.4.1.529.23.1.1.1.67 | internetProfile-SessionOptions-CallFilter, internetProfile__session_options__call_filter | 0 | 0 | The name of the filter used to determine if a packet should cause the idle timer to be reset or, when the answer profile is use… |
| 1.3.6.1.4.1.529.23.1.1.1.68 | internetProfile-SessionOptions-DataFilter, internetProfile__session_options__data_filter | 0 | 0 | The name of the filter used to determine if packets should be forwarded or dropped. |
| 1.3.6.1.4.1.529.23.1.1.1.69 | internetProfile-SessionOptions-FilterPersistence, internetProfile__session_options__filter_persistence | 0 | 0 | Determines if filters should persist between calls. |
| 1.3.6.1.4.1.529.23.1.1.1.70 | internetProfile-SessionOptions-IdleTimer, internetProfile__session_options__idle_timer | 0 | 0 | The number of seconds of no activity before a call will be dropped. The value 0 disables the idle timer. |
| 1.3.6.1.4.1.529.23.1.1.1.71 | internetProfile-SessionOptions-TsIdleMode, internetProfile__session_options__ts_idle_mode | 0 | 0 | The method used to determine when the terminal server idle session timer is reset. |
| 1.3.6.1.4.1.529.23.1.1.1.72 | internetProfile-SessionOptions-TsIdleTimer, internetProfile__session_options__ts_idle_timer | 0 | 0 | The number of seconds of no activity as defined by the idle mode before a session will be terminated. |
| 1.3.6.1.4.1.529.23.1.1.1.73 | internetProfile-SessionOptions-Backup, internetProfile__session_options__backup | 0 | 0 | Name of the backup connection profile. |
| 1.3.6.1.4.1.529.23.1.1.1.74 | internetProfile-SessionOptions-Secondary, internetProfile__session_options__secondary | 0 | 0 | A secondary internet profile used for dial back-up support. |
| 1.3.6.1.4.1.529.23.1.1.1.75 | internetProfile__session_options__atmp_gateway | 0 | 0 | This profile is an ATMP gateway connection to an mobile client's home network. |
| 1.3.6.1.4.1.529.23.1.1.1.76 | internetProfile-SessionOptions-MaxCallDuration, internetProfile__session_options__max_call_duration | 0 | 0 | The number of minutes of connect time before a call will be dropped. The value 0 disables the connection timer. |
| 1.3.6.1.4.1.529.23.1.1.1.77 | internetProfile-SessionOptions-VtpGateway, internetProfile__session_options__vtp_gateway | 0 | 0 | This profile is an VTP gateway connection to an mobile client's home network. |
| 1.3.6.1.4.1.529.23.1.1.1.78 | internetProfile-SessionOptions-Blockcountlimit, internetProfile__session_options__blockcountlimit | 0 | 0 | Maximum number of failed attempts allowed for connection before blocking the call. |
| 1.3.6.1.4.1.529.23.1.1.1.79 | internetProfile-SessionOptions-Blockduration, internetProfile__session_options__blockduration | 0 | 0 | Number of seconds that connection attempts to non responding network will be blocked before allowing retries. |
| 1.3.6.1.4.1.529.23.1.1.1.80 | internetProfile__session_options__max_atmp_tunnels | 0 | 0 | If this profile is an ATMP gateway, then this parameter specifies the maximum number of ATMP tunnels allowed to the ATMP home n… |
| 1.3.6.1.4.1.529.23.1.1.1.81 | internetProfile-SessionOptions-MaxVtpTunnels, internetProfile__session_options__max_vtp_tunnels | 0 | 0 | If this profile is a VTP gateway, then this parameter specifies the maximum number of VTP tunnels allowed to the VTP home netwo… |
| 1.3.6.1.4.1.529.23.1.1.1.82 | internetProfile-SessionOptions-RedialDelayLimit, internetProfile__session_options__redial_delay_limit | 0 | 0 | Number of seconds delay before allowing a redial |
| 1.3.6.1.4.1.529.23.1.1.1.83 | internetProfile-SessionOptions-SesRateType, internetProfile__session_options__ses_rate_type | 0 | 0 | The per ses rate type. |
| 1.3.6.1.4.1.529.23.1.1.1.84 | internetProfile-SessionOptions-SesRateMode, internetProfile__session_options__ses_rate_mode | 0 | 0 | The per ses rate mode. |
| 1.3.6.1.4.1.529.23.1.1.1.85 | internetProfile-SessionOptions-SesAdslCapUpRate, internetProfile__session_options__ses_adsl_cap_up_rate | 0 | 0 | The per session adsl-cap up stream data rate |
| 1.3.6.1.4.1.529.23.1.1.1.86 | internetProfile-SessionOptions-SesAdslCapDownRate, internetProfile__session_options__ses_adsl_cap_down_rate | 0 | 0 | The per session adsl-cap down stream data rate |
| 1.3.6.1.4.1.529.23.1.1.1.87 | internetProfile-SessionOptions-SesSdslRate, internetProfile__session_options__ses_sdsl_rate | 0 | 0 | The per session symetrical data rate. This parameter does not pertain to the old 16 port sdsl card. |
| 1.3.6.1.4.1.529.23.1.1.1.88 | internetProfile-SessionOptions-SesAdslDmtUpRate, internetProfile__session_options__ses_adsl_dmt_up_rate | 0 | 0 | The per session adsl-dmt up stream data rate |
| 1.3.6.1.4.1.529.23.1.1.1.89 | internetProfile-SessionOptions-SesAdslDmtDownRate, internetProfile__session_options__ses_adsl_dmt_down_rate | 0 | 0 | The per session adsl-dmt down stream data rate |
| 1.3.6.1.4.1.529.23.1.1.1.90 | internetProfile-SessionOptions-RxDataRateLimit, internetProfile__session_options__rx_data_rate_limit | 0 | 0 | The maximum information rate to be received from the named station (kbps). |
| 1.3.6.1.4.1.529.23.1.1.1.91 | internetProfile-SessionOptions-TxDataRateLimit, internetProfile__session_options__tx_data_rate_limit | 0 | 0 | The maximum information rate to be transmitted to the named station (kbps). |
| 1.3.6.1.4.1.529.23.1.1.1.92 | internetProfile-TelcoOptions-AnswerOriginate, internetProfile__telco_options__answer_originate | 0 | 0 | Specifies if this profile can be used for incoming calls, outgoing calls, or both. |
| 1.3.6.1.4.1.529.23.1.1.1.93 | internetProfile-TelcoOptions-Callback, internetProfile__telco_options__callback | 0 | 0 | When true a call received from the named host requires callback security. The number dialed is the phoneNumber from this connec… |
| 1.3.6.1.4.1.529.23.1.1.1.95 | internetProfile-TelcoOptions-NailedGroups, internetProfile__telco_options__nailed_groups | 0 | 0 | All the nailed groups belonging to a session. MPP supports multiple groups. |
| 1.3.6.1.4.1.529.23.1.1.1.96 | internetProfile-TelcoOptions-Ft1Caller, internetProfile__telco_options__ft1_caller | 0 | 0 | Specifies if this side should initiate calls when a mix of nailed and switched calls are being used. |
| 1.3.6.1.4.1.529.23.1.1.1.97 | internetProfile-TelcoOptions-Force56kbps, internetProfile__telco_options__force_56kbps | 0 | 0 | If yes then inbound 64 kbps calls are connected at 56 kbps. |
| 1.3.6.1.4.1.529.23.1.1.1.98 | internetProfile-TelcoOptions-DataService, internetProfile__telco_options__data_service | 0 | 0 | The type of bearer channel capability to set up for each switched call in the session. |
| 1.3.6.1.4.1.529.23.1.1.1.99 | internetProfile-TelcoOptions-CallByCall, internetProfile__telco_options__call_by_call | 0 | 0 | The call-by-call signaling value for PRI lines. |
| 1.3.6.1.4.1.529.23.1.1.1.100 | internetProfile-TelcoOptions-BillingNumber, internetProfile__telco_options__billing_number | 0 | 0 | A number used for billing purposes. This number, if present, is used as either a 'billing suffix' or the 'calling party number'. |
| 1.3.6.1.4.1.529.23.1.1.1.101 | internetProfile-TelcoOptions-TransitNumber, internetProfile__telco_options__transit_number | 0 | 0 | The string for use in the 'transit network IE' for PRI calling when going through a LEC. |
| 1.3.6.1.4.1.529.23.1.1.1.102 | internetProfile-TelcoOptions-ExpectCallback, internetProfile__telco_options__expect_callback | 0 | 0 | When true we expect calls to the named host will result in a callback from that host. This would occur if the remote host were … |
| 1.3.6.1.4.1.529.23.1.1.1.103 | internetProfile-TelcoOptions-DialoutAllowed, internetProfile__telco_options__dialout_allowed | 0 | 0 | When true, this connection is allowed to use the LAN modems to place outgoing calls. |
| 1.3.6.1.4.1.529.23.1.1.1.104 | internetProfile-TelcoOptions-DelayCallback, internetProfile__telco_options__delay_callback | 0 | 0 | Number of seconds to delay before dialing back. Values of 0-3 seconds are treated as 3 seconds. |
| 1.3.6.1.4.1.529.23.1.1.1.105 | internetProfile-PppOptions-SendAuthMode, internetProfile__ppp_options__send_auth_mode | 0 | 0 | The type of PPP authentication to use for this call. |
| 1.3.6.1.4.1.529.23.1.1.1.106 | internetProfile-PppOptions-SendPassword, internetProfile__ppp_options__send_password | 0 | 0 | This is the password sent to the far end; used for MPP and PPP PAP and CHAP security. |
| 1.3.6.1.4.1.529.23.1.1.1.107 | internetProfile-PppOptions-SubstituteSendName, internetProfile__ppp_options__substitute_send_name | 0 | 0 | Name send to the far end, if different from the global system name. |
| 1.3.6.1.4.1.529.23.1.1.1.108 | internetProfile-PppOptions-RecvPassword, internetProfile__ppp_options__recv_password | 0 | 0 | This is the password received from the far end; used for MPP and PPP PAP and CHAP security. |
| 1.3.6.1.4.1.529.23.1.1.1.109 | internetProfile-PppOptions-LinkCompression, internetProfile__ppp_options__link_compression | 0 | 0 | The type of link compression to use for PPP, MP, and MPP calls. |
| 1.3.6.1.4.1.529.23.1.1.1.110 | internetProfile-PppOptions-Mru, internetProfile__ppp_options__mru | 0 | 0 | The Maximum Receive Unit, i.e. the largest frame we will accept. |
| 1.3.6.1.4.1.529.23.1.1.1.111 | internetProfile-PppOptions-Lqm, internetProfile__ppp_options__lqm | 0 | 0 | Link Quality Monitoring. Set to Yes to enable the PPP LQM protocol. |
| 1.3.6.1.4.1.529.23.1.1.1.112 | internetProfile-PppOptions-LqmMinimumPeriod, internetProfile__ppp_options__lqm_minimum_period | 0 | 0 | The minimum period, in 1/100 of a second, that we will accept/send link quality monitoring packets. |
| 1.3.6.1.4.1.529.23.1.1.1.113 | internetProfile-PppOptions-LqmMaximumPeriod, internetProfile__ppp_options__lqm_maximum_period | 0 | 0 | The maximum period, in 1/100 of a second, that we will accept/send link quality monitoring packets. |
| 1.3.6.1.4.1.529.23.1.1.1.114 | internetProfile-PppOptions-CbcpEnabled, internetProfile__ppp_options__cbcp_enabled | 0 | 0 | Enable Microsoft Callback Control Protocol Negotiation. |
| 1.3.6.1.4.1.529.23.1.1.1.115 | internetProfile-PppOptions-ModeCallbackControl, internetProfile__ppp_options__mode_callback_control | 0 | 0 | CBCP operation allowed on to use for this call. |
| 1.3.6.1.4.1.529.23.1.1.1.116 | internetProfile-PppOptions-DelayCallbackControl, internetProfile__ppp_options__delay_callback_control | 0 | 0 | Delay to request before callback to us is initiated |
| 1.3.6.1.4.1.529.23.1.1.1.117 | internetProfile-PppOptions-TrunkGroupCallbackControl, internetProfile__ppp_options__trunk_group_callback_control | 0 | 0 | Trunk group to use for the callback. |
| 1.3.6.1.4.1.529.23.1.1.1.118 | internetProfile-PppOptions-SplitCodeDotUserEnabled, internetProfile__ppp_options__split_code_dot_user_enabled | 0 | 0 | TRUE if local splitting of passwords is desired in CACHE-TOKEN. This feature permits the use of usernames longer than five char… |
| 1.3.6.1.4.1.529.23.1.1.1.119 | internetProfile-PppOptions-PppInterfaceType, internetProfile__ppp_options__ppp_interface_type | 0 | 0 | PPP network interface for this profile. |
| 1.3.6.1.4.1.529.23.1.1.1.120 | internetProfile-MpOptions-BaseChannelCount, internetProfile__mp_options__base_channel_count | 0 | 0 | When the session is initially set up, and if it is a fixed session, the number of channels to be used for the call. |
| 1.3.6.1.4.1.529.23.1.1.1.121 | internetProfile-MpOptions-MinimumChannels, internetProfile__mp_options__minimum_channels | 0 | 0 | The default value for the minimum number of channels in a multi-channel call. |
| 1.3.6.1.4.1.529.23.1.1.1.122 | internetProfile-MpOptions-MaximumChannels, internetProfile__mp_options__maximum_channels | 0 | 0 | The default value for the maximum number of channels in a multi-channel call. |
| 1.3.6.1.4.1.529.23.1.1.1.123 | internetProfile-MpOptions-BacpEnable, internetProfile__mp_options__bacp_enable | 0 | 0 | Enable Bandwidth Allocation Control Protocol (BACP). |
| 1.3.6.1.4.1.529.23.1.1.1.124 | internetProfile-MppOptions-AuxSendPassword, internetProfile__mpp_options__aux_send_password | 0 | 0 | This is the password sent to the far end; used for MPP PAP-TOKEN-CHAP security. |
| 1.3.6.1.4.1.529.23.1.1.1.125 | internetProfile-MppOptions-DynamicAlgorithm, internetProfile__mpp_options__dynamic_algorithm | 0 | 0 | The algorithm to use to calculate the average link utilization. Bandwidth changes are performed on the average utilization, not… |
| 1.3.6.1.4.1.529.23.1.1.1.126 | internetProfile-MppOptions-BandwidthMonitorDirection, internetProfile__mpp_options__bandwidth_monitor_direction | 0 | 0 | The direction to monitor link utilization. A unit can monitor transmit, transmit and receive, or turn off monitoring entirely. |
| 1.3.6.1.4.1.529.23.1.1.1.127 | internetProfile-MppOptions-IncrementChannelCount, internetProfile__mpp_options__increment_channel_count | 0 | 0 | Number of channels to increment as a block. |
| 1.3.6.1.4.1.529.23.1.1.1.128 | internetProfile-MppOptions-DecrementChannelCount, internetProfile__mpp_options__decrement_channel_count | 0 | 0 | Number of channels to decrement as a block. |
| 1.3.6.1.4.1.529.23.1.1.1.129 | internetProfile-MppOptions-SecondsHistory, internetProfile__mpp_options__seconds_history | 0 | 0 | The number of seconds of history that link utilization is averaged over to make bandwidth changes. |
| 1.3.6.1.4.1.529.23.1.1.1.130 | internetProfile-MppOptions-AddPersistence, internetProfile__mpp_options__add_persistence | 0 | 0 | The number of seconds of that the average line utilization must exceed the target utilization before bandwidth will be added. |
| 1.3.6.1.4.1.529.23.1.1.1.131 | internetProfile-MppOptions-SubPersistence, internetProfile__mpp_options__sub_persistence | 0 | 0 | The number of seconds of that the average line utilization must fall below the target utilization before bandwidth will be redu… |
| 1.3.6.1.4.1.529.23.1.1.1.132 | internetProfile-MppOptions-TargetUtilization, internetProfile__mpp_options__target_utilization | 0 | 0 | The default value for the target utilization. Bandwidth changes occur when the average utilization exceeds or falls below this … |
| 1.3.6.1.4.1.529.23.1.1.1.133 | internetProfile-FrOptions-FrameRelayProfile, internetProfile__fr_options__frame_relay_profile | 0 | 0 | Frame Relay profile name, specifies link over which this circuit is established. |
| 1.3.6.1.4.1.529.23.1.1.1.134 | internetProfile-FrOptions-Dlci, internetProfile__fr_options__dlci | 0 | 0 | The assigned DLCI value for this connection, for PVC. |
| 1.3.6.1.4.1.529.23.1.1.1.135 | internetProfile-FrOptions-CircuitName, internetProfile__fr_options__circuit_name | 0 | 0 | The peer frame relay datalink for a FR circuit. |
| 1.3.6.1.4.1.529.23.1.1.1.136 | internetProfile-FrOptions-FrDirectEnabled, internetProfile__fr_options__fr_direct_enabled | 0 | 0 | Enable the frame relay direct option for this connection. |
| 1.3.6.1.4.1.529.23.1.1.1.137 | internetProfile-FrOptions-FrDirectProfile, internetProfile__fr_options__fr_direct_profile | 0 | 0 | Name of the frame relay profile that will be used for frame-relay-direct routing. |
| 1.3.6.1.4.1.529.23.1.1.1.138 | internetProfile-FrOptions-FrDirectDlci, internetProfile__fr_options__fr_direct_dlci | 0 | 0 | The DLCI of the frame relay direct connection. |
| 1.3.6.1.4.1.529.23.1.1.1.139 | internetProfile-TcpClearOptions-Host, internetProfile__tcp_clear_options__host | 0 | 0 | The first TCP CLEAR login host. |
| 1.3.6.1.4.1.529.23.1.1.1.140 | internetProfile-TcpClearOptions-Port, internetProfile__tcp_clear_options__port | 0 | 0 | The TCP port of the first login-host. |
| 1.3.6.1.4.1.529.23.1.1.1.141 | internetProfile-TcpClearOptions-Host2, internetProfile__tcp_clear_options__host2 | 0 | 0 | The second TCP CLEAR login host. |
| 1.3.6.1.4.1.529.23.1.1.1.142 | internetProfile-TcpClearOptions-Port2, internetProfile__tcp_clear_options__port2 | 0 | 0 | The TCP port of the second login-host. |
| 1.3.6.1.4.1.529.23.1.1.1.143 | internetProfile-TcpClearOptions-Host3, internetProfile__tcp_clear_options__host3 | 0 | 0 | The third TCP CLEAR login host. |
| 1.3.6.1.4.1.529.23.1.1.1.144 | internetProfile-TcpClearOptions-Port3, internetProfile__tcp_clear_options__port3 | 0 | 0 | The TCP port of the third login-host. |
| ... | ||||