A mibdmtAlDslNetworkProfile entry containing objects that
maps to the parameters of mibdmtAlDslNetworkProfile profile.
Parsed from file mibdmtalnet.mib.txt
Company: None
Module: ASCEND-MIBDMTALDSLNETWORKPROFILE-MIB
A mibdmtAlDslNetworkProfile entry containing objects that
maps to the parameters of mibdmtAlDslNetworkProfile profile.
Parsed from file ASCEND-MIBDMTALNET-MIB.mib
Module: ASCEND-MIBDMTALNET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBDMTALNET-MIB
[Automatically extracted from oidview.com]
mibdmtAlDslNetworkProfileEntry OBJECT-TYPE SYNTAX MibdmtAlDslNetworkProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibdmtAlDslNetworkProfile entry containing objects that maps to the parameters of mibdmtAlDslNetworkProfile profile." INDEX { dmtAlDslNetworkProfile__shelf__, dmtAlDslNetworkProfile__slot__, dmtAlDslNetworkProfile__item__ } ::= { mibdmtAlDslNetworkProfileTable 1 }
mibdmtAlDslNetworkProfileEntry OBJECT-TYPE SYNTAX MibdmtAlDslNetworkProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibdmtAlDslNetworkProfile entry containing objects that maps to the parameters of mibdmtAlDslNetworkProfile profile." INDEX { dmtAlDslNetworkProfile-Shelf-o, dmtAlDslNetworkProfile-Slot-o, dmtAlDslNetworkProfile-Item-o } ::= { mibdmtAlDslNetworkProfileTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.10.1.1.1 | dmtAlDslNetworkProfile-Shelf-o, dmtAlDslNetworkProfile__shelf__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.2 | dmtAlDslNetworkProfile-Slot-o, dmtAlDslNetworkProfile__slot__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.3 | dmtAlDslNetworkProfile-Item-o, dmtAlDslNetworkProfile__item__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.4 | dmtAlDslNetworkProfile-Name, dmtAlDslNetworkProfile__name | 0 | 0 | For future use. The current design does not use the name field but instead references Dmt Alcatel Adsl lines by the physical ad… |
| 1.3.6.1.4.1.529.23.10.1.1.5 | dmtAlDslNetworkProfile-PhysicalAddress-Shelf, dmtAlDslNetworkProfile__physical_address__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.6 | dmtAlDslNetworkProfile-PhysicalAddress-Slot, dmtAlDslNetworkProfile__physical_address__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.7 | dmtAlDslNetworkProfile-PhysicalAddress-ItemNumber, dmtAlDslNetworkProfile__physical_address__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.10.1.1.8 | dmtAlDslNetworkProfile-Enabled, dmtAlDslNetworkProfile__enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.10.1.1.9 | dmtAlDslNetworkProfile-ProfileNumber, dmtAlDslNetworkProfile__profile_number | 0 | 0 | For potential backwards compatibility. The current design consists of one line profile numbered 0. |
| 1.3.6.1.4.1.529.23.10.1.1.10 | dmtAlDslNetworkProfile__line_config__trunk_group | 0 | 0 | The trunk group to which this line is assigned. 0 means this line is not part of a trunk group. |
| 1.3.6.1.4.1.529.23.10.1.1.11 | dmtAlDslNetworkProfile-LineConfig-NailedGroup, dmtAlDslNetworkProfile__line_config__nailed_group | 0 | 0 | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.10.1.1.12 | dmtAlDslNetworkProfile__line_config__route_port__slot_number__slot_number | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.13 | dmtAlDslNetworkProfile__line_config__route_port__slot_number__shelf_number | 0 | 0 | TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as i… |
| 1.3.6.1.4.1.529.23.10.1.1.14 | dmtAlDslNetworkProfile__line_config__route_port__relative_port_number__relative_port_number | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.15 | dmtAlDslNetworkProfile__line_config__activation | 0 | 0 | Line activation mode. |
| 1.3.6.1.4.1.529.23.10.1.1.16 | dmtAlDslNetworkProfile__line_config__call_route_info__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.17 | dmtAlDslNetworkProfile__line_config__call_route_info__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.18 | dmtAlDslNetworkProfile__line_config__call_route_info__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.10.1.1.19 | dmtAlDslNetworkProfile-LineConfig-RateAdaptModeUp, dmtAlDslNetworkProfile__line_config__rate_adapt_mode_up | 0 | 0 | The up stream rate adaptive mode of operation. ONLY OPERATOR_CONTROLLED and AUTOMATIC_AT_STARTUP are currently supported. |
| 1.3.6.1.4.1.529.23.10.1.1.20 | dmtAlDslNetworkProfile-LineConfig-RateAdaptModeDown, dmtAlDslNetworkProfile__line_config__rate_adapt_mode_down | 0 | 0 | The down stream rate adaptive mode of operation. ONLY OPERATOR_CONTROLLED and AUTOMATIC_AT_STARTUP are currently supported. |
| 1.3.6.1.4.1.529.23.10.1.1.21 | dmtAlDslNetworkProfile-LineConfig-RateAdaptRatioUp, dmtAlDslNetworkProfile__line_config__rate_adapt_ratio_up | 0 | 0 | The ratio in percent of excess bitrate distribution over the up stream fast and interleaved latencies. 100% - fast path , 0% - … |
| 1.3.6.1.4.1.529.23.10.1.1.22 | dmtAlDslNetworkProfile-LineConfig-RateAdaptRatioDown, dmtAlDslNetworkProfile__line_config__rate_adapt_ratio_down | 0 | 0 | The ratio in percent of excess bitrate distribution over the down stream fast and interleaved latencies. 100% - fast path , 0% … |
| 1.3.6.1.4.1.529.23.10.1.1.25 | dmtAlDslNetworkProfile-LineConfig-MaxPowerSpectralDensity, dmtAlDslNetworkProfile__line_config__max_power_spectral_density | 0 | 0 | The power spectral density in dBm/Hz allowed on the line. Decreasing the value may reduce capacity. Defined for downstream only… |
| 1.3.6.1.4.1.529.23.10.1.1.26 | dmtAlDslNetworkProfile-FastPathConfig-MinBitrateUp, dmtAlDslNetworkProfile__fast_path_config__min_bitrate_up | 0 | 0 | The up stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.27 | dmtAlDslNetworkProfile-FastPathConfig-MinBitrateDown, dmtAlDslNetworkProfile__fast_path_config__min_bitrate_down | 0 | 0 | The down stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.28 | dmtAlDslNetworkProfile-FastPathConfig-MaxBitrateUp, dmtAlDslNetworkProfile__fast_path_config__max_bitrate_up | 0 | 0 | The up stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.29 | dmtAlDslNetworkProfile-FastPathConfig-MaxBitrateDown, dmtAlDslNetworkProfile__fast_path_config__max_bitrate_down | 0 | 0 | The down stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.30 | dmtAlDslNetworkProfile-FastPathConfig-PlannedBitrateUp, dmtAlDslNetworkProfile__fast_path_config__planned_bitrate_up | 0 | 0 | The up stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.31 | dmtAlDslNetworkProfile-FastPathConfig-PlannedBitrateDown, dmtAlDslNetworkProfile__fast_path_config__planned_bitrate_down | 0 | 0 | The down stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.32 | dmtAlDslNetworkProfile-InterleavePathConfig-MinBitrateUp, dmtAlDslNetworkProfile__interleave_path_config__min_bitrate_up | 0 | 0 | The up stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.33 | dmtAlDslNetworkProfile-InterleavePathConfig-MinBitrateDown, dmtAlDslNetworkProfile__interleave_path_config__min_bitrate_down | 0 | 0 | The down stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.34 | dmtAlDslNetworkProfile-InterleavePathConfig-MaxBitrateUp, dmtAlDslNetworkProfile__interleave_path_config__max_bitrate_up | 0 | 0 | The up stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.35 | dmtAlDslNetworkProfile-InterleavePathConfig-MaxBitrateDown, dmtAlDslNetworkProfile__interleave_path_config__max_bitrate_down | 0 | 0 | The down stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.36 | dmtAlDslNetworkProfile-InterleavePathConfig-PlannedBitrateUp, dmtAlDslNetworkProfile__interleave_path_config__planned_bitrate_up | 0 | 0 | The up stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.37 | dmtAlDslNetworkProfile-InterleavePathConfig-PlannedBitrateDown, dmtAlDslNetworkProfile__interleave_path_config__planned_bitrate_down | 0 | 0 | The down stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.38 | dmtAlDslNetworkProfile-InterleavePathConfig-MaxDelayUp, dmtAlDslNetworkProfile__interleave_path_config__max_delay_up | 0 | 0 | The maximum allowed up stream interleaver induced delay, in msec. |
| 1.3.6.1.4.1.529.23.10.1.1.39 | dmtAlDslNetworkProfile-InterleavePathConfig-MaxDelayDown, dmtAlDslNetworkProfile__interleave_path_config__max_delay_down | 0 | 0 | The maximum allowed down stream interleaver induced delay, in msec. |
| 1.3.6.1.4.1.529.23.10.1.1.40 | dmtAlDslNetworkProfile-MarginConfig-TargetNoiseMarginUp, dmtAlDslNetworkProfile__margin_config__target_noise_margin_up | 0 | 0 | The up stream noise margin in dB that the modem shall achieve relative to BER 10^-7. |
| 1.3.6.1.4.1.529.23.10.1.1.41 | dmtAlDslNetworkProfile-MarginConfig-TargetNoiseMarginDown, dmtAlDslNetworkProfile__margin_config__target_noise_margin_down | 0 | 0 | The down stream noise margin in dB that the modem shall achieve relative to BER 10^-7. |
| 1.3.6.1.4.1.529.23.10.1.1.42 | dmtAlDslNetworkProfile-MarginConfig-MinNoiseMarginUp, dmtAlDslNetworkProfile__margin_config__min_noise_margin_up | 0 | 0 | The up stream minimum noise margin in dB that the modem shall tolerate relative to BER 10^-7. If current noise margin falls bel… |
| 1.3.6.1.4.1.529.23.10.1.1.43 | dmtAlDslNetworkProfile-MarginConfig-MinNoiseMarginDown, dmtAlDslNetworkProfile__margin_config__min_noise_margin_down | 0 | 0 | The down stream minimum noise margin in dB that the modem shall tolerate relative to BER 10^-7. If current noise margin falls b… |
| 1.3.6.1.4.1.529.23.10.1.1.44 | dmtAlDslNetworkProfile-MarginConfig-MaxAddNoiseMarginUp, dmtAlDslNetworkProfile__margin_config__max_add_noise_margin_up | 0 | 0 | The up stream maximum noise margin in dB on top of the target-noise-margin that the modem shall tolerate relative to BER 10^-7.… |
| 1.3.6.1.4.1.529.23.10.1.1.45 | dmtAlDslNetworkProfile-MarginConfig-MaxAddNoiseMarginDown, dmtAlDslNetworkProfile__margin_config__max_add_noise_margin_down | 0 | 0 | The down stream maximum noise margin in dB on top of the target-noise-margin that the modem shall tolerate relative to BER 10^-… |
| 1.3.6.1.4.1.529.23.10.1.1.46 | dmtAlDslNetworkProfile-MarginConfig-RaDownshiftMarginUp, dmtAlDslNetworkProfile__margin_config__ra_downshift_margin_up | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current up stream noise margin is below this parameter for more than ra-down… |
| 1.3.6.1.4.1.529.23.10.1.1.47 | dmtAlDslNetworkProfile-MarginConfig-RaDownshiftIntUp, dmtAlDslNetworkProfile__margin_config__ra_downshift_int_up | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current up stream noise margin is below ra-downshift-margin-up for more… |
| 1.3.6.1.4.1.529.23.10.1.1.48 | dmtAlDslNetworkProfile-MarginConfig-RaDownshiftMarginDown, dmtAlDslNetworkProfile__margin_config__ra_downshift_margin_down | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current down stream noise margin is below this parameter for more than ra-do… |
| 1.3.6.1.4.1.529.23.10.1.1.49 | dmtAlDslNetworkProfile-MarginConfig-RaDownshiftIntDown, dmtAlDslNetworkProfile__margin_config__ra_downshift_int_down | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current down stream noise margin is below ra-downshift-margin-down for … |
| 1.3.6.1.4.1.529.23.10.1.1.50 | dmtAlDslNetworkProfile-MarginConfig-RaUpshiftMarginUp, dmtAlDslNetworkProfile__margin_config__ra_upshift_margin_up | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current up stream noise margin is above this parameter for more than ra-down… |
| 1.3.6.1.4.1.529.23.10.1.1.51 | dmtAlDslNetworkProfile-MarginConfig-RaUpshiftIntUp, dmtAlDslNetworkProfile__margin_config__ra_upshift_int_up | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current up stream noise margin is above ra-downshift-margin-up for more… |
| 1.3.6.1.4.1.529.23.10.1.1.52 | dmtAlDslNetworkProfile-MarginConfig-RaUpshiftMarginDown, dmtAlDslNetworkProfile__margin_config__ra_upshift_margin_down | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current down stream noise margin is above this parameter for more than ra-do… |
| 1.3.6.1.4.1.529.23.10.1.1.53 | dmtAlDslNetworkProfile-MarginConfig-RaUpshiftIntDown, dmtAlDslNetworkProfile__margin_config__ra_upshift_int_down | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current down stream noise margin is above ra-downshift-margin-down for … |
| 1.3.6.1.4.1.529.23.10.1.1.54 | dmtAlDslNetworkProfile-Action-o, dmtAlDslNetworkProfile__action__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.55 | dmtAlDslNetworkProfile-LineConfig-VpSwitchingVpi, dmtAlDslNetworkProfile__line_config__vp_switching_vpi | 0 | 0 | The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes… |
| 1.3.6.1.4.1.529.23.10.1.1.56 | dmtAlDslNetworkProfile-LineConfig-MaxAggrPowerLevelUp, dmtAlDslNetworkProfile__line_config__max_aggr_power_level_up | 0 | 0 | The maximum aggregate output power in dBm allowed on the line in the up stream direction. Increasing value may result in capaci… |
| 1.3.6.1.4.1.529.23.10.1.1.57 | dmtAlDslNetworkProfile-LineConfig-MaxAggrPowerLevelDown, dmtAlDslNetworkProfile__line_config__max_aggr_power_level_down | 0 | 0 | The maximum aggregate output power in dBm allowed on the line in the down stream direction. Increasing value may result in capa… |
| 1.3.6.1.4.1.529.23.10.1.1.58 | dmtAlDslNetworkProfile-LineConfig-LineCode, dmtAlDslNetworkProfile__line_config__line_code | 0 | 0 | The DMT line code that will be used for the training. Not an actively used parameter at this point. |
| 1.3.6.1.4.1.529.23.10.1.1.59 | dmtAlDslNetworkProfile-LineConfig-LineLatencyDown, dmtAlDslNetworkProfile__line_config__line_latency_down | 0 | 0 | The DMT line latency to be used for the downstream data transport. |
| 1.3.6.1.4.1.529.23.10.1.1.60 | dmtAlDslNetworkProfile-LineConfig-LineLatencyUp, dmtAlDslNetworkProfile__line_config__line_latency_up | 0 | 0 | The DMT line latency to be used for the upstream data transport. |
| 1.3.6.1.4.1.529.23.10.1.1.61 | dmtAlDslNetworkProfile-LineConfig-TrellisEncoding, dmtAlDslNetworkProfile__line_config__trellis_encoding | 0 | 0 | TRUE if trellis encoding is to be enabled, FALSE otherwise. |
| 1.3.6.1.4.1.529.23.10.1.1.62 | dmtAlDslNetworkProfile-LineConfig-GainDefault, dmtAlDslNetworkProfile__line_config__gain_default | 0 | 0 | The default gain value in db to be used for the AGC. |
| 1.3.6.1.4.1.529.23.10.1.1.63 | dmtAlDslNetworkProfile-SparingMode, dmtAlDslNetworkProfile__sparing_mode | 0 | 0 | Port sparing operational mode for this port. |
| 1.3.6.1.4.1.529.23.10.1.1.64 | dmtAlDslNetworkProfile-LineConfig-UpstreamStartBin, dmtAlDslNetworkProfile__line_config__upstream_start_bin | 0 | 0 | The starting upstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.65 | dmtAlDslNetworkProfile-LineConfig-UpstreamEndBin, dmtAlDslNetworkProfile__line_config__upstream_end_bin | 0 | 0 | The ending upstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.66 | dmtAlDslNetworkProfile-LineConfig-DownstreamStartBin, dmtAlDslNetworkProfile__line_config__downstream_start_bin | 0 | 0 | The starting downstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.67 | dmtAlDslNetworkProfile-LineConfig-DownstreamEndBin, dmtAlDslNetworkProfile__line_config__downstream_end_bin | 0 | 0 | The ending downstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.68 | dmtAlDslNetworkProfile__line_config__enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.10.1.1.69 | dmtAlDslNetworkProfile-LineConfig-LoopBack | 0 | 0 | Configuration of different modem loopbacks. |
| 1.3.6.1.4.1.529.23.10.1.1.70 | dmtAlDslNetworkProfile-LineConfig-BitSwapping | 0 | 0 | Controls wether Bit-Swapping is enabled or no. On 12 port DMT card and 48 port G.lite card has not effect. |
| 1.3.6.1.4.1.529.23.10.1.1.71 | dmtAlDslNetworkProfile-LineConfig-FbmDbmMode | 0 | 0 | Controls wether the line is in Fixed-Bit-Map or Dual-Bit-Map mode. Only relevant for Annex-C cards. |
| 1.3.6.1.4.1.529.23.10.1.1.72 | dmtAlDslNetworkProfile-ThreshProfile | 0 | 0 | The name of the DSL-THRESHOLD profile which applies to this ADSL line. |
| 1.3.6.1.4.1.529.23.10.1.1.73 | dmtAlDslNetworkProfile-IgnoreLineup | 0 | 0 | Ignore line up value for this port. |
| 1.3.6.1.4.1.529.23.10.1.1.74 | dmtAlDslNetworkProfile-LineConfig-AlcatelUs413Boost | 0 | 0 | Provides an increase in upstream rate in T1.413 mode for 24/48 Port Annex A boards based on the Globespan chip set when connect… |