The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.
Parsed from file mibdmtalnet.mib.txt
Company: None
Module: ASCEND-MIBDMTALDSLNETWORKPROFILE-MIB
The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY.
Parsed from file ASCEND-MIBDMTALNET-MIB.mib
Module: ASCEND-MIBDMTALNET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBDMTALNET-MIB
[Automatically extracted from oidview.com]
dmtAlDslNetworkProfile__line_config__vp_switching_vpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY." ::= { mibdmtAlDslNetworkProfileEntry 55 }
dmtAlDslNetworkProfile-LineConfig-VpSwitchingVpi OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Vpi to be used for the VP switching. Rest of the VPIs within valid vpi-vci-range will be used for the VC switching. Changes in this range will take effect immediately. THE USER SHOULD BE VERY CAREFUL WHILE CHANGING THIS VALUE BECAUSE ALL CONNECTIONS ON THE LIM WHERE THIS PORT BELONGS WILL BE DROPPED IN ORDER TO MAKE THIS NEW VALUE EFFECTIVE IMMEDIATELY." ::= { mibdmtAlDslNetworkProfileEntry 55 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.10.1.1.1 | dmtAlDslNetworkProfile-Shelf-o, dmtAlDslNetworkProfile__shelf__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.2 | dmtAlDslNetworkProfile-Slot-o, dmtAlDslNetworkProfile__slot__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.3 | dmtAlDslNetworkProfile-Item-o, dmtAlDslNetworkProfile__item__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.4 | dmtAlDslNetworkProfile-Name, dmtAlDslNetworkProfile__name | 0 | 0 | For future use. The current design does not use the name field but instead references Dmt Alcatel Adsl lines by the physical ad… |
| 1.3.6.1.4.1.529.23.10.1.1.5 | dmtAlDslNetworkProfile-PhysicalAddress-Shelf, dmtAlDslNetworkProfile__physical_address__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.6 | dmtAlDslNetworkProfile-PhysicalAddress-Slot, dmtAlDslNetworkProfile__physical_address__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.7 | dmtAlDslNetworkProfile-PhysicalAddress-ItemNumber, dmtAlDslNetworkProfile__physical_address__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.10.1.1.8 | dmtAlDslNetworkProfile-Enabled, dmtAlDslNetworkProfile__enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.10.1.1.9 | dmtAlDslNetworkProfile-ProfileNumber, dmtAlDslNetworkProfile__profile_number | 0 | 0 | For potential backwards compatibility. The current design consists of one line profile numbered 0. |
| 1.3.6.1.4.1.529.23.10.1.1.10 | dmtAlDslNetworkProfile__line_config__trunk_group | 0 | 0 | The trunk group to which this line is assigned. 0 means this line is not part of a trunk group. |
| 1.3.6.1.4.1.529.23.10.1.1.11 | dmtAlDslNetworkProfile-LineConfig-NailedGroup, dmtAlDslNetworkProfile__line_config__nailed_group | 0 | 0 | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.10.1.1.12 | dmtAlDslNetworkProfile__line_config__route_port__slot_number__slot_number | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.13 | dmtAlDslNetworkProfile__line_config__route_port__slot_number__shelf_number | 0 | 0 | TNT is a multi shelf system. To minimise the changes required to existing code the shelf number is added to this structure as i… |
| 1.3.6.1.4.1.529.23.10.1.1.14 | dmtAlDslNetworkProfile__line_config__route_port__relative_port_number__relative_port_number | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.15 | dmtAlDslNetworkProfile__line_config__activation | 0 | 0 | Line activation mode. |
| 1.3.6.1.4.1.529.23.10.1.1.16 | dmtAlDslNetworkProfile__line_config__call_route_info__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.17 | dmtAlDslNetworkProfile__line_config__call_route_info__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.10.1.1.18 | dmtAlDslNetworkProfile__line_config__call_route_info__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.10.1.1.19 | dmtAlDslNetworkProfile-LineConfig-RateAdaptModeUp, dmtAlDslNetworkProfile__line_config__rate_adapt_mode_up | 0 | 0 | The up stream rate adaptive mode of operation. ONLY OPERATOR_CONTROLLED and AUTOMATIC_AT_STARTUP are currently supported. |
| 1.3.6.1.4.1.529.23.10.1.1.20 | dmtAlDslNetworkProfile-LineConfig-RateAdaptModeDown, dmtAlDslNetworkProfile__line_config__rate_adapt_mode_down | 0 | 0 | The down stream rate adaptive mode of operation. ONLY OPERATOR_CONTROLLED and AUTOMATIC_AT_STARTUP are currently supported. |
| 1.3.6.1.4.1.529.23.10.1.1.21 | dmtAlDslNetworkProfile-LineConfig-RateAdaptRatioUp, dmtAlDslNetworkProfile__line_config__rate_adapt_ratio_up | 0 | 0 | The ratio in percent of excess bitrate distribution over the up stream fast and interleaved latencies. 100% - fast path , 0% - … |
| 1.3.6.1.4.1.529.23.10.1.1.22 | dmtAlDslNetworkProfile-LineConfig-RateAdaptRatioDown, dmtAlDslNetworkProfile__line_config__rate_adapt_ratio_down | 0 | 0 | The ratio in percent of excess bitrate distribution over the down stream fast and interleaved latencies. 100% - fast path , 0% … |
| 1.3.6.1.4.1.529.23.10.1.1.25 | dmtAlDslNetworkProfile-LineConfig-MaxPowerSpectralDensity, dmtAlDslNetworkProfile__line_config__max_power_spectral_density | 0 | 0 | The power spectral density in dBm/Hz allowed on the line. Decreasing the value may reduce capacity. Defined for downstream only… |
| 1.3.6.1.4.1.529.23.10.1.1.26 | dmtAlDslNetworkProfile-FastPathConfig-MinBitrateUp, dmtAlDslNetworkProfile__fast_path_config__min_bitrate_up | 0 | 0 | The up stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.27 | dmtAlDslNetworkProfile-FastPathConfig-MinBitrateDown, dmtAlDslNetworkProfile__fast_path_config__min_bitrate_down | 0 | 0 | The down stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.28 | dmtAlDslNetworkProfile-FastPathConfig-MaxBitrateUp, dmtAlDslNetworkProfile__fast_path_config__max_bitrate_up | 0 | 0 | The up stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.29 | dmtAlDslNetworkProfile-FastPathConfig-MaxBitrateDown, dmtAlDslNetworkProfile__fast_path_config__max_bitrate_down | 0 | 0 | The down stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.30 | dmtAlDslNetworkProfile-FastPathConfig-PlannedBitrateUp, dmtAlDslNetworkProfile__fast_path_config__planned_bitrate_up | 0 | 0 | The up stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.31 | dmtAlDslNetworkProfile-FastPathConfig-PlannedBitrateDown, dmtAlDslNetworkProfile__fast_path_config__planned_bitrate_down | 0 | 0 | The down stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.32 | dmtAlDslNetworkProfile-InterleavePathConfig-MinBitrateUp, dmtAlDslNetworkProfile__interleave_path_config__min_bitrate_up | 0 | 0 | The up stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.33 | dmtAlDslNetworkProfile-InterleavePathConfig-MinBitrateDown, dmtAlDslNetworkProfile__interleave_path_config__min_bitrate_down | 0 | 0 | The down stream minimum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.34 | dmtAlDslNetworkProfile-InterleavePathConfig-MaxBitrateUp, dmtAlDslNetworkProfile__interleave_path_config__max_bitrate_up | 0 | 0 | The up stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.35 | dmtAlDslNetworkProfile-InterleavePathConfig-MaxBitrateDown, dmtAlDslNetworkProfile__interleave_path_config__max_bitrate_down | 0 | 0 | The down stream maximum requested bitrate, in Kbps. NOT valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.36 | dmtAlDslNetworkProfile-InterleavePathConfig-PlannedBitrateUp, dmtAlDslNetworkProfile__interleave_path_config__planned_bitrate_up | 0 | 0 | The up stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.37 | dmtAlDslNetworkProfile-InterleavePathConfig-PlannedBitrateDown, dmtAlDslNetworkProfile__interleave_path_config__planned_bitrate_down | 0 | 0 | The down stream rate that will be used, in Kbps. ONLY valid in rate-adapt-mode = OPERATOR_CONTROLLED. |
| 1.3.6.1.4.1.529.23.10.1.1.38 | dmtAlDslNetworkProfile-InterleavePathConfig-MaxDelayUp, dmtAlDslNetworkProfile__interleave_path_config__max_delay_up | 0 | 0 | The maximum allowed up stream interleaver induced delay, in msec. |
| 1.3.6.1.4.1.529.23.10.1.1.39 | dmtAlDslNetworkProfile-InterleavePathConfig-MaxDelayDown, dmtAlDslNetworkProfile__interleave_path_config__max_delay_down | 0 | 0 | The maximum allowed down stream interleaver induced delay, in msec. |
| 1.3.6.1.4.1.529.23.10.1.1.40 | dmtAlDslNetworkProfile-MarginConfig-TargetNoiseMarginUp, dmtAlDslNetworkProfile__margin_config__target_noise_margin_up | 0 | 0 | The up stream noise margin in dB that the modem shall achieve relative to BER 10^-7. |
| 1.3.6.1.4.1.529.23.10.1.1.41 | dmtAlDslNetworkProfile-MarginConfig-TargetNoiseMarginDown, dmtAlDslNetworkProfile__margin_config__target_noise_margin_down | 0 | 0 | The down stream noise margin in dB that the modem shall achieve relative to BER 10^-7. |
| 1.3.6.1.4.1.529.23.10.1.1.42 | dmtAlDslNetworkProfile-MarginConfig-MinNoiseMarginUp, dmtAlDslNetworkProfile__margin_config__min_noise_margin_up | 0 | 0 | The up stream minimum noise margin in dB that the modem shall tolerate relative to BER 10^-7. If current noise margin falls bel… |
| 1.3.6.1.4.1.529.23.10.1.1.43 | dmtAlDslNetworkProfile-MarginConfig-MinNoiseMarginDown, dmtAlDslNetworkProfile__margin_config__min_noise_margin_down | 0 | 0 | The down stream minimum noise margin in dB that the modem shall tolerate relative to BER 10^-7. If current noise margin falls b… |
| 1.3.6.1.4.1.529.23.10.1.1.44 | dmtAlDslNetworkProfile-MarginConfig-MaxAddNoiseMarginUp, dmtAlDslNetworkProfile__margin_config__max_add_noise_margin_up | 0 | 0 | The up stream maximum noise margin in dB on top of the target-noise-margin that the modem shall tolerate relative to BER 10^-7.… |
| 1.3.6.1.4.1.529.23.10.1.1.45 | dmtAlDslNetworkProfile-MarginConfig-MaxAddNoiseMarginDown, dmtAlDslNetworkProfile__margin_config__max_add_noise_margin_down | 0 | 0 | The down stream maximum noise margin in dB on top of the target-noise-margin that the modem shall tolerate relative to BER 10^-… |
| 1.3.6.1.4.1.529.23.10.1.1.46 | dmtAlDslNetworkProfile-MarginConfig-RaDownshiftMarginUp, dmtAlDslNetworkProfile__margin_config__ra_downshift_margin_up | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current up stream noise margin is below this parameter for more than ra-down… |
| 1.3.6.1.4.1.529.23.10.1.1.47 | dmtAlDslNetworkProfile-MarginConfig-RaDownshiftIntUp, dmtAlDslNetworkProfile__margin_config__ra_downshift_int_up | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current up stream noise margin is below ra-downshift-margin-up for more… |
| 1.3.6.1.4.1.529.23.10.1.1.48 | dmtAlDslNetworkProfile-MarginConfig-RaDownshiftMarginDown, dmtAlDslNetworkProfile__margin_config__ra_downshift_margin_down | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current down stream noise margin is below this parameter for more than ra-do… |
| 1.3.6.1.4.1.529.23.10.1.1.49 | dmtAlDslNetworkProfile-MarginConfig-RaDownshiftIntDown, dmtAlDslNetworkProfile__margin_config__ra_downshift_int_down | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current down stream noise margin is below ra-downshift-margin-down for … |
| 1.3.6.1.4.1.529.23.10.1.1.50 | dmtAlDslNetworkProfile-MarginConfig-RaUpshiftMarginUp, dmtAlDslNetworkProfile__margin_config__ra_upshift_margin_up | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current up stream noise margin is above this parameter for more than ra-down… |
| 1.3.6.1.4.1.529.23.10.1.1.51 | dmtAlDslNetworkProfile-MarginConfig-RaUpshiftIntUp, dmtAlDslNetworkProfile__margin_config__ra_upshift_int_up | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current up stream noise margin is above ra-downshift-margin-up for more… |
| 1.3.6.1.4.1.529.23.10.1.1.52 | dmtAlDslNetworkProfile-MarginConfig-RaUpshiftMarginDown, dmtAlDslNetworkProfile__margin_config__ra_upshift_margin_down | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In dB. If current down stream noise margin is above this parameter for more than ra-do… |
| 1.3.6.1.4.1.529.23.10.1.1.53 | dmtAlDslNetworkProfile-MarginConfig-RaUpshiftIntDown, dmtAlDslNetworkProfile__margin_config__ra_upshift_int_down | 0 | 0 | Valid ONLY in rate-adapt-mode = DYNAMIC. In seconds. If current down stream noise margin is above ra-downshift-margin-down for … |
| 1.3.6.1.4.1.529.23.10.1.1.54 | dmtAlDslNetworkProfile-Action-o, dmtAlDslNetworkProfile__action__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.10.1.1.56 | dmtAlDslNetworkProfile-LineConfig-MaxAggrPowerLevelUp, dmtAlDslNetworkProfile__line_config__max_aggr_power_level_up | 0 | 0 | The maximum aggregate output power in dBm allowed on the line in the up stream direction. Increasing value may result in capaci… |
| 1.3.6.1.4.1.529.23.10.1.1.57 | dmtAlDslNetworkProfile-LineConfig-MaxAggrPowerLevelDown, dmtAlDslNetworkProfile__line_config__max_aggr_power_level_down | 0 | 0 | The maximum aggregate output power in dBm allowed on the line in the down stream direction. Increasing value may result in capa… |
| 1.3.6.1.4.1.529.23.10.1.1.58 | dmtAlDslNetworkProfile-LineConfig-LineCode, dmtAlDslNetworkProfile__line_config__line_code | 0 | 0 | The DMT line code that will be used for the training. Not an actively used parameter at this point. |
| 1.3.6.1.4.1.529.23.10.1.1.59 | dmtAlDslNetworkProfile-LineConfig-LineLatencyDown, dmtAlDslNetworkProfile__line_config__line_latency_down | 0 | 0 | The DMT line latency to be used for the downstream data transport. |
| 1.3.6.1.4.1.529.23.10.1.1.60 | dmtAlDslNetworkProfile-LineConfig-LineLatencyUp, dmtAlDslNetworkProfile__line_config__line_latency_up | 0 | 0 | The DMT line latency to be used for the upstream data transport. |
| 1.3.6.1.4.1.529.23.10.1.1.61 | dmtAlDslNetworkProfile-LineConfig-TrellisEncoding, dmtAlDslNetworkProfile__line_config__trellis_encoding | 0 | 0 | TRUE if trellis encoding is to be enabled, FALSE otherwise. |
| 1.3.6.1.4.1.529.23.10.1.1.62 | dmtAlDslNetworkProfile-LineConfig-GainDefault, dmtAlDslNetworkProfile__line_config__gain_default | 0 | 0 | The default gain value in db to be used for the AGC. |
| 1.3.6.1.4.1.529.23.10.1.1.63 | dmtAlDslNetworkProfile-SparingMode, dmtAlDslNetworkProfile__sparing_mode | 0 | 0 | Port sparing operational mode for this port. |
| 1.3.6.1.4.1.529.23.10.1.1.64 | dmtAlDslNetworkProfile-LineConfig-UpstreamStartBin, dmtAlDslNetworkProfile__line_config__upstream_start_bin | 0 | 0 | The starting upstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.65 | dmtAlDslNetworkProfile-LineConfig-UpstreamEndBin, dmtAlDslNetworkProfile__line_config__upstream_end_bin | 0 | 0 | The ending upstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.66 | dmtAlDslNetworkProfile-LineConfig-DownstreamStartBin, dmtAlDslNetworkProfile__line_config__downstream_start_bin | 0 | 0 | The starting downstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.67 | dmtAlDslNetworkProfile-LineConfig-DownstreamEndBin, dmtAlDslNetworkProfile__line_config__downstream_end_bin | 0 | 0 | The ending downstream frequency bin. |
| 1.3.6.1.4.1.529.23.10.1.1.68 | dmtAlDslNetworkProfile__line_config__enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.10.1.1.69 | dmtAlDslNetworkProfile-LineConfig-LoopBack | 0 | 0 | Configuration of different modem loopbacks. |
| 1.3.6.1.4.1.529.23.10.1.1.70 | dmtAlDslNetworkProfile-LineConfig-BitSwapping | 0 | 0 | Controls wether Bit-Swapping is enabled or no. On 12 port DMT card and 48 port G.lite card has not effect. |
| 1.3.6.1.4.1.529.23.10.1.1.71 | dmtAlDslNetworkProfile-LineConfig-FbmDbmMode | 0 | 0 | Controls wether the line is in Fixed-Bit-Map or Dual-Bit-Map mode. Only relevant for Annex-C cards. |
| 1.3.6.1.4.1.529.23.10.1.1.72 | dmtAlDslNetworkProfile-ThreshProfile | 0 | 0 | The name of the DSL-THRESHOLD profile which applies to this ADSL line. |
| 1.3.6.1.4.1.529.23.10.1.1.73 | dmtAlDslNetworkProfile-IgnoreLineup | 0 | 0 | Ignore line up value for this port. |
| 1.3.6.1.4.1.529.23.10.1.1.74 | dmtAlDslNetworkProfile-LineConfig-AlcatelUs413Boost | 0 | 0 | Provides an increase in upstream rate in T1.413 mode for 24/48 Port Annex A boards based on the Globespan chip set when connect… |