Vendor: Ascend Communications Inc.
Module: ASCEND-MIBT1NET-MIB
[Automatically extracted from oidview.com]
t1NetworkProfileV1-LineInterface-Name OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { mibt1NetworkProfileV1-LineInterfaceEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.126.2.1.2 | t1NetworkProfileV1-LineInterface-Index-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.126.2.1.3 | t1NetworkProfileV1-LineInterface-Enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.4 | t1NetworkProfileV1-LineInterface-TOnlineType | 0 | 0 | The tonline type of an e1 line. |
| 1.3.6.1.4.1.529.23.126.2.1.5 | t1NetworkProfileV1-LineInterface-FrameType | 0 | 0 | The super-framing mode that is used on the physical link(s). |
| 1.3.6.1.4.1.529.23.126.2.1.6 | t1NetworkProfileV1-LineInterface-Encoding | 0 | 0 | The layer 1 line encoding used for the physical link(s). |
| 1.3.6.1.4.1.529.23.126.2.1.7 | t1NetworkProfileV1-LineInterface-ClockSource | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.126.2.1.8 | t1NetworkProfileV1-LineInterface-ClockPriority | 0 | 0 | Clock priority assigned to the T1 line. Used to select particular lines as clock source. |
| 1.3.6.1.4.1.529.23.126.2.1.9 | t1NetworkProfileV1-LineInterface-SignalingMode | 0 | 0 | Inband, ISDN, ISDN_NFAS, PBX or SS7 signaling. |
| 1.3.6.1.4.1.529.23.126.2.1.10 | t1NetworkProfileV1-LineInterface-IsdnEmulationSide | 0 | 0 | Side the line will emulate: TE (user), or NT (network). |
| 1.3.6.1.4.1.529.23.126.2.1.11 | t1NetworkProfileV1-LineInterface-RobbedBitMode | 0 | 0 | Wink start, idle start, incoming wink. |
| 1.3.6.1.4.1.529.23.126.2.1.12 | t1NetworkProfileV1-LineInterface-DefaultCallType | 0 | 0 | Specify the default call-type for incoming calls, for purposes of call routing and signalling. |
| 1.3.6.1.4.1.529.23.126.2.1.13 | t1NetworkProfileV1-LineInterface-SwitchType | 0 | 0 | t1NetworkProfileV1-LineInterface-Switchtype |
| 1.3.6.1.4.1.529.23.126.2.1.14 | t1NetworkProfileV1-LineInterface-NfasGroupId | 0 | 0 | For NFAS lines: the nfas group id. Not used with robbed bit signaling. |
| 1.3.6.1.4.1.529.23.126.2.1.15 | t1NetworkProfileV1-LineInterface-NfasId | 0 | 0 | For NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit si… |
| 1.3.6.1.4.1.529.23.126.2.1.16 | t1NetworkProfileV1-LineInterface-IncomingCallHandling | 0 | 0 | This parameter is used to determine the type of processing required for incoming calls from this line. |
| 1.3.6.1.4.1.529.23.126.2.1.17 | t1NetworkProfileV1-LineInterface-DeleteDigits | 0 | 0 | Number of digits to delete from numbers received from a PBX. |
| 1.3.6.1.4.1.529.23.126.2.1.18 | t1NetworkProfileV1-LineInterface-AddDigitString | 0 | 0 | String of digits to prepend to phone number received from PBX. |
| 1.3.6.1.4.1.529.23.126.2.1.19 | t1NetworkProfileV1-LineInterface-CallByCall | 0 | 0 | Call-by-call value to set when routing calls from PBX to network. |
| 1.3.6.1.4.1.529.23.126.2.1.20 | t1NetworkProfileV1-LineInterface-PbxAnswerNumber | 0 | 0 | The answer number that is the equivalent of a port answer-number used for the network to pbx routing. |
| 1.3.6.1.4.1.529.23.126.2.1.21 | t1NetworkProfileV1-LineInterface-AnswerService | 0 | 0 | The switched service type (or none) that is used for routing network calls to the pbx. |
| 1.3.6.1.4.1.529.23.126.2.1.22 | t1NetworkProfileV1-LineInterface-oPBXType | 0 | 0 | The PBX Class as defined in the enumeration above. |
| 1.3.6.1.4.1.529.23.126.2.1.23 | t1NetworkProfileV1-LineInterface-DataSense | 0 | 0 | D-channel normal or inverted data. Currently unused (normal data is always selected. |
| 1.3.6.1.4.1.529.23.126.2.1.24 | t1NetworkProfileV1-LineInterface-IdleMode | 0 | 0 | D-channel mark or flag idle. Currently unused (flag idle is always selected. |
| 1.3.6.1.4.1.529.23.126.2.1.25 | t1NetworkProfileV1-LineInterface-oFDL | 0 | 0 | Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise. |
| 1.3.6.1.4.1.529.23.126.2.1.26 | t1NetworkProfileV1-LineInterface-FrontEndType | 0 | 0 | The front end type (CSU/DSX) of the T1 transceiver. |
| 1.3.6.1.4.1.529.23.126.2.1.27 | t1NetworkProfileV1-LineInterface-oDSXLineLength | 0 | 0 | The length of the physical T1 line (for DSX lines). |
| 1.3.6.1.4.1.529.23.126.2.1.28 | t1NetworkProfileV1-LineInterface-oCSUBuildOut | 0 | 0 | Line buildout value for CSU lines. |
| 1.3.6.1.4.1.529.23.126.2.1.29 | t1NetworkProfileV1-LineInterface-OverlapReceiving | 0 | 0 | TRUE if overlap receiving procedure may be used to handle incoming call, FALSE if not |
| 1.3.6.1.4.1.529.23.126.2.1.30 | t1NetworkProfileV1-LineInterface-PriPrefixNumber | 0 | 0 | The unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits wh… |
| 1.3.6.1.4.1.529.23.126.2.1.31 | t1NetworkProfileV1-LineInterface-TrailingDigits | 0 | 0 | Number of trailing digits expected from the called party number information elements of INFORMATION messages when overlap recei… |
| 1.3.6.1.4.1.529.23.126.2.1.32 | t1NetworkProfileV1-LineInterface-T302Timer | 0 | 0 | Number of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving p… |
| 1.3.6.1.4.1.529.23.126.2.1.33 | t1NetworkProfileV1-LineInterface-Layer3End | 0 | 0 | If x-side, layer 3 favors outgoing call when a call collision occurs. |
| 1.3.6.1.4.1.529.23.126.2.1.34 | t1NetworkProfileV1-LineInterface-Layer2End | 0 | 0 | This parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, a… |
| 1.3.6.1.4.1.529.23.126.2.1.35 | t1NetworkProfileV1-LineInterface-NlValue | 0 | 0 | Number of re-transmissions; default to 64. |
| 1.3.6.1.4.1.529.23.126.2.1.36 | t1NetworkProfileV1-LineInterface-LoopAvoidance | 0 | 0 | Loop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7). |
| 1.3.6.1.4.1.529.23.126.2.1.37 | t1NetworkProfileV1-LineInterface-MaintenanceState | 0 | 0 | TRUE if the line is in user-requested maintenance mode, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.38 | t1NetworkProfileV1-LineInterface-NumberComplete | 0 | 0 | The criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, … |
| 1.3.6.1.4.1.529.23.126.2.1.39 | t1NetworkProfileV1-LineInterface-GroupBAnswerSignal | 0 | 0 | The group B signal to send prior to answering a call. |
| 1.3.6.1.4.1.529.23.126.2.1.40 | t1NetworkProfileV1-LineInterface-GroupBBusySignal | 0 | 0 | The group B signal to send to reject a call. |
| 1.3.6.1.4.1.529.23.126.2.1.41 | t1NetworkProfileV1-LineInterface-GroupBNoMatchSignal | 0 | 0 | The group B signal to send to reject a call with invalid call number. |
| 1.3.6.1.4.1.529.23.126.2.1.42 | t1NetworkProfileV1-LineInterface-GroupBCollectSignal | 0 | 0 | The group B signal to send to answer/reject a collect call. |
| 1.3.6.1.4.1.529.23.126.2.1.43 | t1NetworkProfileV1-LineInterface-GroupIiSignal | 0 | 0 | The group II signal to send after sending all address digits. |
| 1.3.6.1.4.1.529.23.126.2.1.44 | t1NetworkProfileV1-LineInterface-InputSampleCount | 0 | 0 | The number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the mo… |
| 1.3.6.1.4.1.529.23.126.2.1.45 | t1NetworkProfileV1-LineInterface-AnswerDelay | 0 | 0 | Number of milliseconds to wait before answering an incoming R2 call. |
| 1.3.6.1.4.1.529.23.126.2.1.46 | t1NetworkProfileV1-LineInterface-CallerId | 0 | 0 | TRUE if the caller Id is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.47 | t1NetworkProfileV1-LineInterface-LineSignaling | 0 | 0 | The line signaling of E1 line. |
| 1.3.6.1.4.1.529.23.126.2.1.48 | t1NetworkProfileV1-LineInterface-Timer1CollectCall | 0 | 0 | Adjustable between 0 ~ 2000ms |
| 1.3.6.1.4.1.529.23.126.2.1.49 | t1NetworkProfileV1-LineInterface-Timer2CollectCall | 0 | 0 | Adjustable between 10 ~ 2000ms |
| 1.3.6.1.4.1.529.23.126.2.1.50 | t1NetworkProfileV1-LineInterface-SendDiscVal | 0 | 0 | Number of seconds before sending ISDN disconnect to switch. 0 means disable. |
| 1.3.6.1.4.1.529.23.126.2.1.51 | t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber1 | 0 | 0 | The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP. |
| 1.3.6.1.4.1.529.23.126.2.1.52 | t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber2 | 0 | 0 | The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP. |
| 1.3.6.1.4.1.529.23.126.2.1.53 | t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber3 | 0 | 0 | The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP. |
| 1.3.6.1.4.1.529.23.126.2.1.54 | t1NetworkProfileV1-LineInterface-PriTypeOfNumber | 0 | 0 | PRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls. |
| 1.3.6.1.4.1.529.23.126.2.1.55 | t1NetworkProfileV1-LineInterface-PriNumberingPlanId | 0 | 0 | PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls. |
| 1.3.6.1.4.1.529.23.126.2.1.56 | t1NetworkProfileV1-LineInterface-SuperFrameSrcLineNumber | 0 | 0 | The line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchr… |
| 1.3.6.1.4.1.529.23.126.2.1.57 | t1NetworkProfileV1-LineInterface-CollectIncomingDigits | 0 | 0 | TRUE collect incoming called/calling digits, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.58 | t1NetworkProfileV1-LineInterface-T1InterDigitTimeout | 0 | 0 | Inter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines. |
| 1.3.6.1.4.1.529.23.126.2.1.59 | t1NetworkProfileV1-LineInterface-R1UseAnir | 0 | 0 | TRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.60 | t1NetworkProfileV1-LineInterface-R1FirstDigitTimer | 0 | 0 | The timer between sending KPA and receiving first Digit in R1 signaling in milliseconds. |
| 1.3.6.1.4.1.529.23.126.2.1.61 | t1NetworkProfileV1-LineInterface-R1AnirDelay | 0 | 0 | Delay in milliseconds between receiving ST and sending ANIR signal. |
| 1.3.6.1.4.1.529.23.126.2.1.62 | t1NetworkProfileV1-LineInterface-R1AnirTimer | 0 | 0 | Time in milliseconds of ANIR signal. |
| 1.3.6.1.4.1.529.23.126.2.1.63 | t1NetworkProfileV1-LineInterface-R1Modified | 0 | 0 | Use R1 modified signaling. Default is FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.64 | t1NetworkProfileV1-LineInterface-FirstDs0 | 0 | 0 | When using fractional T1/E1 the first DS0 used. Default is 1 |
| 1.3.6.1.4.1.529.23.126.2.1.65 | t1NetworkProfileV1-LineInterface-LastDs0 | 0 | 0 | When using fractional T1/E1 the last DS0 used. Default is 24 |
| 1.3.6.1.4.1.529.23.126.2.1.66 | t1NetworkProfileV1-LineInterface-NailedGroup | 0 | 0 | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.126.2.1.67 | t1NetworkProfileV1-LineInterface-Ss7Continuity-IncomingProcedure | 0 | 0 | Procedure used for incoming continuity check on this line. |
| 1.3.6.1.4.1.529.23.126.2.1.68 | t1NetworkProfileV1-LineInterface-Ss7Continuity-OutgoingProcedure | 0 | 0 | Procedure used for outgoing continuity check on this line. |
| 1.3.6.1.4.1.529.23.126.2.1.69 | t1NetworkProfileV1-LineInterface-LineProvision | 0 | 0 | Line Provision. |
| 1.3.6.1.4.1.529.23.126.2.1.70 | t1NetworkProfileV1-LineInterface-Gr303Mode | 0 | 0 | GR-303 Mode. |
| 1.3.6.1.4.1.529.23.126.2.1.71 | t1NetworkProfileV1-LineInterface-Gr303GroupId | 0 | 0 | For GR303 lines: the interface group id. |
| 1.3.6.1.4.1.529.23.126.2.1.72 | t1NetworkProfileV1-LineInterface-Gr303Ds1Id | 0 | 0 | For GR303 lines: The logical DS1 id. |
| 1.3.6.1.4.1.529.23.126.2.1.73 | t1NetworkProfileV1-LineInterface-SwitchVersion | 0 | 0 | Switch Version. |
| 1.3.6.1.4.1.529.23.126.2.1.74 | t1NetworkProfileV1-LineInterface-GroupBNoChargeSignal | 0 | 0 | The group B signal to send if subscriber line is idle / no charge |
| 1.3.6.1.4.1.529.23.126.2.1.75 | t1NetworkProfileV1-LineInterface-StatusChangeTrapEnable | 0 | 0 | When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status c… |
| 1.3.6.1.4.1.529.23.126.2.1.76 | t1NetworkProfileV1-LineInterface-DownTransDelay | 0 | 0 | To control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equa… |
| 1.3.6.1.4.1.529.23.126.2.1.77 | t1NetworkProfileV1-LineInterface-UpTransDelay | 0 | 0 | To control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 … |
| 1.3.6.1.4.1.529.23.126.2.1.79 | t1NetworkProfileV1-LineInterface-NetworkSpecificFacilities | 0 | 0 | Network Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits o… |
| 1.3.6.1.4.1.529.23.126.2.1.80 | t1NetworkProfileV1-LineInterface-CauseCodeVerificationEnable | 0 | 0 | When set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If t… |