t1NetworkProfileV1-LineInterface-Switchtype
View at oid-info.com
The network switch type, needed for ISDN/NFAS signaling.
Parsed from file ASCEND-MIBT1NET-MIB.mib
Module: ASCEND-MIBT1NET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBT1NET-MIB
[Automatically extracted from oidview.com]
t1NetworkProfileV1-LineInterface-SwitchType OBJECT-TYPE SYNTAX INTEGER { attPri (1), ntiPri (2), globandPri (3), japanPri (4), vn3Pri (5), onetr6Pri (6), net5Pri (7), danishPri (8), australPri (9), natIsdn2Pri (10), taiwanPri (31), isdxDpnss (11), islxDpnss (12), mercuryDpnss (13), dass2 (14), btSs7 (32), unknownBri (15), att5essBri (16), dms100Nt1Bri (17), nisdn1Bri (18), vn2Bri (19), btnr191Bri (20), net3Bri (21), ptpNet3Bri (22), kddBri (23), belgianBri (24), australBri (25), swissBri (26), german1tr6Bri (27), dutch1tr6Bri (28), switchCas (29), idslPtpBri (30) } ACCESS read-write STATUS mandatory DESCRIPTION "The network switch type, needed for ISDN/NFAS signaling." ::= { mibt1NetworkProfileV1-LineInterfaceEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.126.2.1.1 | t1NetworkProfileV1-LineInterface-Name | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.126.2.1.2 | t1NetworkProfileV1-LineInterface-Index-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.126.2.1.3 | t1NetworkProfileV1-LineInterface-Enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.4 | t1NetworkProfileV1-LineInterface-TOnlineType | 0 | 0 | The tonline type of an e1 line. |
| 1.3.6.1.4.1.529.23.126.2.1.5 | t1NetworkProfileV1-LineInterface-FrameType | 0 | 0 | The super-framing mode that is used on the physical link(s). |
| 1.3.6.1.4.1.529.23.126.2.1.6 | t1NetworkProfileV1-LineInterface-Encoding | 0 | 0 | The layer 1 line encoding used for the physical link(s). |
| 1.3.6.1.4.1.529.23.126.2.1.7 | t1NetworkProfileV1-LineInterface-ClockSource | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.126.2.1.8 | t1NetworkProfileV1-LineInterface-ClockPriority | 0 | 0 | Clock priority assigned to the T1 line. Used to select particular lines as clock source. |
| 1.3.6.1.4.1.529.23.126.2.1.9 | t1NetworkProfileV1-LineInterface-SignalingMode | 0 | 0 | Inband, ISDN, ISDN_NFAS, PBX or SS7 signaling. |
| 1.3.6.1.4.1.529.23.126.2.1.10 | t1NetworkProfileV1-LineInterface-IsdnEmulationSide | 0 | 0 | Side the line will emulate: TE (user), or NT (network). |
| 1.3.6.1.4.1.529.23.126.2.1.11 | t1NetworkProfileV1-LineInterface-RobbedBitMode | 0 | 0 | Wink start, idle start, incoming wink. |
| 1.3.6.1.4.1.529.23.126.2.1.12 | t1NetworkProfileV1-LineInterface-DefaultCallType | 0 | 0 | Specify the default call-type for incoming calls, for purposes of call routing and signalling. |
| 1.3.6.1.4.1.529.23.126.2.1.14 | t1NetworkProfileV1-LineInterface-NfasGroupId | 0 | 0 | For NFAS lines: the nfas group id. Not used with robbed bit signaling. |
| 1.3.6.1.4.1.529.23.126.2.1.15 | t1NetworkProfileV1-LineInterface-NfasId | 0 | 0 | For NFAS lines: the interface id. For SS7 lines when Q.931+ control protocol is used: interface id. Not used with robbed bit si… |
| 1.3.6.1.4.1.529.23.126.2.1.16 | t1NetworkProfileV1-LineInterface-IncomingCallHandling | 0 | 0 | This parameter is used to determine the type of processing required for incoming calls from this line. |
| 1.3.6.1.4.1.529.23.126.2.1.17 | t1NetworkProfileV1-LineInterface-DeleteDigits | 0 | 0 | Number of digits to delete from numbers received from a PBX. |
| 1.3.6.1.4.1.529.23.126.2.1.18 | t1NetworkProfileV1-LineInterface-AddDigitString | 0 | 0 | String of digits to prepend to phone number received from PBX. |
| 1.3.6.1.4.1.529.23.126.2.1.19 | t1NetworkProfileV1-LineInterface-CallByCall | 0 | 0 | Call-by-call value to set when routing calls from PBX to network. |
| 1.3.6.1.4.1.529.23.126.2.1.20 | t1NetworkProfileV1-LineInterface-PbxAnswerNumber | 0 | 0 | The answer number that is the equivalent of a port answer-number used for the network to pbx routing. |
| 1.3.6.1.4.1.529.23.126.2.1.21 | t1NetworkProfileV1-LineInterface-AnswerService | 0 | 0 | The switched service type (or none) that is used for routing network calls to the pbx. |
| 1.3.6.1.4.1.529.23.126.2.1.22 | t1NetworkProfileV1-LineInterface-oPBXType | 0 | 0 | The PBX Class as defined in the enumeration above. |
| 1.3.6.1.4.1.529.23.126.2.1.23 | t1NetworkProfileV1-LineInterface-DataSense | 0 | 0 | D-channel normal or inverted data. Currently unused (normal data is always selected. |
| 1.3.6.1.4.1.529.23.126.2.1.24 | t1NetworkProfileV1-LineInterface-IdleMode | 0 | 0 | D-channel mark or flag idle. Currently unused (flag idle is always selected. |
| 1.3.6.1.4.1.529.23.126.2.1.25 | t1NetworkProfileV1-LineInterface-oFDL | 0 | 0 | Who's FDL are we using. Used only if frame-type is ESF - Ignored otherwise. |
| 1.3.6.1.4.1.529.23.126.2.1.26 | t1NetworkProfileV1-LineInterface-FrontEndType | 0 | 0 | The front end type (CSU/DSX) of the T1 transceiver. |
| 1.3.6.1.4.1.529.23.126.2.1.27 | t1NetworkProfileV1-LineInterface-oDSXLineLength | 0 | 0 | The length of the physical T1 line (for DSX lines). |
| 1.3.6.1.4.1.529.23.126.2.1.28 | t1NetworkProfileV1-LineInterface-oCSUBuildOut | 0 | 0 | Line buildout value for CSU lines. |
| 1.3.6.1.4.1.529.23.126.2.1.29 | t1NetworkProfileV1-LineInterface-OverlapReceiving | 0 | 0 | TRUE if overlap receiving procedure may be used to handle incoming call, FALSE if not |
| 1.3.6.1.4.1.529.23.126.2.1.30 | t1NetworkProfileV1-LineInterface-PriPrefixNumber | 0 | 0 | The unique prefix of the PRI called party number. It is used to determine whether SETUP message contains any trailing digits wh… |
| 1.3.6.1.4.1.529.23.126.2.1.31 | t1NetworkProfileV1-LineInterface-TrailingDigits | 0 | 0 | Number of trailing digits expected from the called party number information elements of INFORMATION messages when overlap recei… |
| 1.3.6.1.4.1.529.23.126.2.1.32 | t1NetworkProfileV1-LineInterface-T302Timer | 0 | 0 | Number of milliseconds to wait for additional called number information elements for an incoming call using overlap receiving p… |
| 1.3.6.1.4.1.529.23.126.2.1.33 | t1NetworkProfileV1-LineInterface-Layer3End | 0 | 0 | If x-side, layer 3 favors outgoing call when a call collision occurs. |
| 1.3.6.1.4.1.529.23.126.2.1.34 | t1NetworkProfileV1-LineInterface-Layer2End | 0 | 0 | This parameter is used to determine the address to send when two PBXs are connected back-to-back; one side must act as an ET, a… |
| 1.3.6.1.4.1.529.23.126.2.1.35 | t1NetworkProfileV1-LineInterface-NlValue | 0 | 0 | Number of re-transmissions; default to 64. |
| 1.3.6.1.4.1.529.23.126.2.1.36 | t1NetworkProfileV1-LineInterface-LoopAvoidance | 0 | 0 | Loop Avoidance; the number of transit PBXs through which a call may be routed (1 to 26 default 7). |
| 1.3.6.1.4.1.529.23.126.2.1.37 | t1NetworkProfileV1-LineInterface-MaintenanceState | 0 | 0 | TRUE if the line is in user-requested maintenance mode, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.38 | t1NetworkProfileV1-LineInterface-NumberComplete | 0 | 0 | The criteria for having received enough digits on an incoming R2 call. Can either be 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 13, … |
| 1.3.6.1.4.1.529.23.126.2.1.39 | t1NetworkProfileV1-LineInterface-GroupBAnswerSignal | 0 | 0 | The group B signal to send prior to answering a call. |
| 1.3.6.1.4.1.529.23.126.2.1.40 | t1NetworkProfileV1-LineInterface-GroupBBusySignal | 0 | 0 | The group B signal to send to reject a call. |
| 1.3.6.1.4.1.529.23.126.2.1.41 | t1NetworkProfileV1-LineInterface-GroupBNoMatchSignal | 0 | 0 | The group B signal to send to reject a call with invalid call number. |
| 1.3.6.1.4.1.529.23.126.2.1.42 | t1NetworkProfileV1-LineInterface-GroupBCollectSignal | 0 | 0 | The group B signal to send to answer/reject a collect call. |
| 1.3.6.1.4.1.529.23.126.2.1.43 | t1NetworkProfileV1-LineInterface-GroupIiSignal | 0 | 0 | The group II signal to send after sending all address digits. |
| 1.3.6.1.4.1.529.23.126.2.1.44 | t1NetworkProfileV1-LineInterface-InputSampleCount | 0 | 0 | The number of Goertzel input samples (each Goertzel sample is of length N=205) to compute in order to decode DTMF tones, the mo… |
| 1.3.6.1.4.1.529.23.126.2.1.45 | t1NetworkProfileV1-LineInterface-AnswerDelay | 0 | 0 | Number of milliseconds to wait before answering an incoming R2 call. |
| 1.3.6.1.4.1.529.23.126.2.1.46 | t1NetworkProfileV1-LineInterface-CallerId | 0 | 0 | TRUE if the caller Id is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.47 | t1NetworkProfileV1-LineInterface-LineSignaling | 0 | 0 | The line signaling of E1 line. |
| 1.3.6.1.4.1.529.23.126.2.1.48 | t1NetworkProfileV1-LineInterface-Timer1CollectCall | 0 | 0 | Adjustable between 0 ~ 2000ms |
| 1.3.6.1.4.1.529.23.126.2.1.49 | t1NetworkProfileV1-LineInterface-Timer2CollectCall | 0 | 0 | Adjustable between 10 ~ 2000ms |
| 1.3.6.1.4.1.529.23.126.2.1.50 | t1NetworkProfileV1-LineInterface-SendDiscVal | 0 | 0 | Number of seconds before sending ISDN disconnect to switch. 0 means disable. |
| 1.3.6.1.4.1.529.23.126.2.1.51 | t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber1 | 0 | 0 | The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP. |
| 1.3.6.1.4.1.529.23.126.2.1.52 | t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber2 | 0 | 0 | The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP. |
| 1.3.6.1.4.1.529.23.126.2.1.53 | t1NetworkProfileV1-LineInterface-HuntGrpPhoneNumber3 | 0 | 0 | The hunt group phone number associated with this line. Manually entered field which is read-write accessible via SNMP. |
| 1.3.6.1.4.1.529.23.126.2.1.54 | t1NetworkProfileV1-LineInterface-PriTypeOfNumber | 0 | 0 | PRI Called Party element's Type-Of-Number value for outgoing T1-to-PRI calls. |
| 1.3.6.1.4.1.529.23.126.2.1.55 | t1NetworkProfileV1-LineInterface-PriNumberingPlanId | 0 | 0 | PRI Called Party element's Numbering-Plan-ID value for outgoing T1-to-PRI calls. |
| 1.3.6.1.4.1.529.23.126.2.1.56 | t1NetworkProfileV1-LineInterface-SuperFrameSrcLineNumber | 0 | 0 | The line from which the the Super-Frame sync pulse is taken. Needed by the 'Dropped&Inserted' line so that it can become synchr… |
| 1.3.6.1.4.1.529.23.126.2.1.57 | t1NetworkProfileV1-LineInterface-CollectIncomingDigits | 0 | 0 | TRUE collect incoming called/calling digits, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.58 | t1NetworkProfileV1-LineInterface-T1InterDigitTimeout | 0 | 0 | Inter-Digit Timeout (in milliseconds) for inband T1 and E1 R2 lines. |
| 1.3.6.1.4.1.529.23.126.2.1.59 | t1NetworkProfileV1-LineInterface-R1UseAnir | 0 | 0 | TRUE if the line is to use R1 signaling ANIR (CLID), otherwise FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.60 | t1NetworkProfileV1-LineInterface-R1FirstDigitTimer | 0 | 0 | The timer between sending KPA and receiving first Digit in R1 signaling in milliseconds. |
| 1.3.6.1.4.1.529.23.126.2.1.61 | t1NetworkProfileV1-LineInterface-R1AnirDelay | 0 | 0 | Delay in milliseconds between receiving ST and sending ANIR signal. |
| 1.3.6.1.4.1.529.23.126.2.1.62 | t1NetworkProfileV1-LineInterface-R1AnirTimer | 0 | 0 | Time in milliseconds of ANIR signal. |
| 1.3.6.1.4.1.529.23.126.2.1.63 | t1NetworkProfileV1-LineInterface-R1Modified | 0 | 0 | Use R1 modified signaling. Default is FALSE. |
| 1.3.6.1.4.1.529.23.126.2.1.64 | t1NetworkProfileV1-LineInterface-FirstDs0 | 0 | 0 | When using fractional T1/E1 the first DS0 used. Default is 1 |
| 1.3.6.1.4.1.529.23.126.2.1.65 | t1NetworkProfileV1-LineInterface-LastDs0 | 0 | 0 | When using fractional T1/E1 the last DS0 used. Default is 24 |
| 1.3.6.1.4.1.529.23.126.2.1.66 | t1NetworkProfileV1-LineInterface-NailedGroup | 0 | 0 | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.126.2.1.67 | t1NetworkProfileV1-LineInterface-Ss7Continuity-IncomingProcedure | 0 | 0 | Procedure used for incoming continuity check on this line. |
| 1.3.6.1.4.1.529.23.126.2.1.68 | t1NetworkProfileV1-LineInterface-Ss7Continuity-OutgoingProcedure | 0 | 0 | Procedure used for outgoing continuity check on this line. |
| 1.3.6.1.4.1.529.23.126.2.1.69 | t1NetworkProfileV1-LineInterface-LineProvision | 0 | 0 | Line Provision. |
| 1.3.6.1.4.1.529.23.126.2.1.70 | t1NetworkProfileV1-LineInterface-Gr303Mode | 0 | 0 | GR-303 Mode. |
| 1.3.6.1.4.1.529.23.126.2.1.71 | t1NetworkProfileV1-LineInterface-Gr303GroupId | 0 | 0 | For GR303 lines: the interface group id. |
| 1.3.6.1.4.1.529.23.126.2.1.72 | t1NetworkProfileV1-LineInterface-Gr303Ds1Id | 0 | 0 | For GR303 lines: The logical DS1 id. |
| 1.3.6.1.4.1.529.23.126.2.1.73 | t1NetworkProfileV1-LineInterface-SwitchVersion | 0 | 0 | Switch Version. |
| 1.3.6.1.4.1.529.23.126.2.1.74 | t1NetworkProfileV1-LineInterface-GroupBNoChargeSignal | 0 | 0 | The group B signal to send if subscriber line is idle / no charge |
| 1.3.6.1.4.1.529.23.126.2.1.75 | t1NetworkProfileV1-LineInterface-StatusChangeTrapEnable | 0 | 0 | When set to yes, a line status change trap is sent. NOTE: when the line status change results from a higher level line status c… |
| 1.3.6.1.4.1.529.23.126.2.1.76 | t1NetworkProfileV1-LineInterface-DownTransDelay | 0 | 0 | To control the delay in line state transition from up to down when loss of carrier is detected. Each unit of this value is equa… |
| 1.3.6.1.4.1.529.23.126.2.1.77 | t1NetworkProfileV1-LineInterface-UpTransDelay | 0 | 0 | To control the delay in line state transition from down to up when carrier is detected. Each unit of this value is equal to .1 … |
| 1.3.6.1.4.1.529.23.126.2.1.79 | t1NetworkProfileV1-LineInterface-NetworkSpecificFacilities | 0 | 0 | Network Specific Facilities (NSF) value to store in the NSF IE of the outgoing Q.931 Setup message. This sets the full 8 bits o… |
| 1.3.6.1.4.1.529.23.126.2.1.80 | t1NetworkProfileV1-LineInterface-CauseCodeVerificationEnable | 0 | 0 | When set to yes, the received CAUSE value will be verified to ensure that cause is defined for the configured switch type. If t… |