When set to Yes, entry is allowed only if the authentication server responds with an authentication of the login information. When set to No, entry is also allowed if there is no response from the authentication server. This field is used only for CLID or DNIS authentication.
Parsed from file ASCEND-MIBXAUTH-MIB.mib
Module: ASCEND-MIBXAUTH-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBXAUTH-MIB
[Automatically extracted from oidview.com]
externalAuthProfile-RadAuthClient-AuthRspRequired OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to Yes, entry is allowed only if the authentication server responds with an authentication of the login information. When set to No, entry is also allowed if there is no response from the authentication server. This field is used only for CLID or DNIS authentication." ::= { mibexternalAuthProfileEntry 13 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.529.23.142.1.1.1 | externalAuthProfile-Index-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.142.1.1.2 | externalAuthProfile-AuthType | 0 | 0 | externalAuthProfile-Authtype |
| 1.3.6.1.4.1.529.23.142.1.1.3 | externalAuthProfile-AcctType | 0 | 0 | The type of accounting to perform. |
| 1.3.6.1.4.1.529.23.142.1.1.4 | externalAuthProfile-RadServEnable | 0 | 0 | Whether or not the on-board RADIUS server is enabled. |
| 1.3.6.1.4.1.529.23.142.1.1.8 | externalAuthProfile-RadAuthClient-AuthPort | 0 | 0 | The UDP destination port to use for RADIUS authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.9 | externalAuthProfile-RadAuthClient-AuthSrcPort | 0 | 0 | The UDP source port to use for RADIUS authentication. If zero, the source port is selected from the non-privileged port range (… |
| 1.3.6.1.4.1.529.23.142.1.1.10 | externalAuthProfile-RadAuthClient-AuthKey | 0 | 0 | The RADIUS authentication access key shared with the RADIUS server. |
| 1.3.6.1.4.1.529.23.142.1.1.11 | externalAuthProfile-RadAuthClient-AuthPool | 0 | 0 | If TRUE an IP address is allocated from the default pool and passed to the RADIUS server during RADIUS authentication. This add… |
| 1.3.6.1.4.1.529.23.142.1.1.12 | externalAuthProfile-RadAuthClient-AuthTimeout | 0 | 0 | externalAuthProfile-RadAuthClient-Authtimeout |
| 1.3.6.1.4.1.529.23.142.1.1.14 | externalAuthProfile-RadAuthClient-AuthIdFailReturnBusy | 0 | 0 | Return busy instead of normal call clearing when id authentication fails. |
| 1.3.6.1.4.1.529.23.142.1.1.15 | externalAuthProfile-RadAuthClient-AuthIdTimeoutReturnBusy | 0 | 0 | Return busy instead of normal call clearing when external id authentication fails. |
| 1.3.6.1.4.1.529.23.142.1.1.16 | externalAuthProfile-RadAuthClient-AuthSessInterval | 0 | 0 | Send the number-of-sessions-per-Class Attribute to the authentication server every auth-sess-interval seconds. |
| 1.3.6.1.4.1.529.23.142.1.1.17 | externalAuthProfile-RadAuthClient-AuthTSSecure | 0 | 0 | externalAuthProfile-RadAuthClient-AuthtSSecure |
| 1.3.6.1.4.1.529.23.142.1.1.18 | externalAuthProfile-RadAuthClient-AuthSend67 | 0 | 0 | If Yes, default attributes 6,7 of Radius and send them in the authentication request. |
| 1.3.6.1.4.1.529.23.142.1.1.19 | externalAuthProfile-RadAuthClient-AuthFrmAdrStart | 0 | 0 | Set Yes to send a second Radius accounting start record when the Framed-Address is assigned. Default No for backward compatibil… |
| 1.3.6.1.4.1.529.23.142.1.1.20 | externalAuthProfile-RadAuthClient-AuthBootHost | 0 | 0 | The IP address of the authentication boot host. |
| 1.3.6.1.4.1.529.23.142.1.1.21 | externalAuthProfile-RadAuthClient-AuthBootHost2 | 0 | 0 | The IP address of the secondary authentication boot host. |
| 1.3.6.1.4.1.529.23.142.1.1.22 | externalAuthProfile-RadAuthClient-AuthBootPort | 0 | 0 | The UDP port to use for RADIUS authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.23 | externalAuthProfile-RadAuthClient-AuthResetTime | 0 | 0 | The time to reset to the primary server after it has failed. |
| 1.3.6.1.4.1.529.23.142.1.1.24 | externalAuthProfile-RadAuthClient-AuthIdMaxRetryTime | 0 | 0 | Maximum time limit to spend retrying RADIUS servers when in id authentication, a value of 0 sets the limit to the internal defa… |
| 1.3.6.1.4.1.529.23.142.1.1.25 | externalAuthProfile-RadAuthClient-AuthRadiusCompat | 0 | 0 | Authentication RADIUS compatibility mode. |
| 1.3.6.1.4.1.529.23.142.1.1.26 | externalAuthProfile-RadAuthClient-AuthKeepUserName | 0 | 0 | Action if the Access-Accept packet from Radius server contains a User-Name attribute. |
| 1.3.6.1.4.1.529.23.142.1.1.27 | externalAuthProfile-RadAuthClient-AuthRealmDelimiters | 0 | 0 | Characters that delimit a realm and user name (used only if auth-keep-user-name=keep-realm-name or radius-delim_count>0) |
| 1.3.6.1.4.1.529.23.142.1.1.28 | externalAuthProfile-RadAuthClient-IdAuthPrefix | 0 | 0 | A short text string prepended to the username portion of a CLID or DNIS authentication request. |
| 1.3.6.1.4.1.529.23.142.1.1.29 | externalAuthProfile-RadAuthClient-AllowAuthConfigRqsts | 0 | 0 | Set Yes to send External Config Requests. Default is set to Yes. |
| 1.3.6.1.4.1.529.23.142.1.1.30 | externalAuthProfile-RadAuthClient-AuthReqDelimCount | 0 | 0 | Number of delimiters to strip from a username in Radius Auth request. |
| 1.3.6.1.4.1.529.23.142.1.1.31 | externalAuthProfile-RadAuthClient-AuthReqStripSide | 0 | 0 | Side to strip chars from a username in a Radius Auth request if delim-count is > 0. |
| 1.3.6.1.4.1.529.23.142.1.1.35 | externalAuthProfile-RadAcctClient-AcctPort | 0 | 0 | The UDP destination port to use for RADIUS accounting. |
| 1.3.6.1.4.1.529.23.142.1.1.36 | externalAuthProfile-RadAcctClient-AcctSrcPort | 0 | 0 | The UDP source port to use for RADIUS accounting. If zero, the source port is selected from the non-privileged port range (1024… |
| 1.3.6.1.4.1.529.23.142.1.1.37 | externalAuthProfile-RadAcctClient-AcctKey | 0 | 0 | The RADIUS accounting access key shared with the RADIUS server. |
| 1.3.6.1.4.1.529.23.142.1.1.38 | externalAuthProfile-RadAcctClient-AcctTimeout | 0 | 0 | Number of seconds to wait for a response to previous accounting request. |
| 1.3.6.1.4.1.529.23.142.1.1.39 | externalAuthProfile-RadAcctClient-AcctSessInterval | 0 | 0 | Send the number-of-sessions-per-Class Attribute to the accounting server every acct-sess-interval seconds. |
| 1.3.6.1.4.1.529.23.142.1.1.40 | externalAuthProfile-RadAcctClient-AcctIdBase | 0 | 0 | The base value to use in reporting Account ID. |
| 1.3.6.1.4.1.529.23.142.1.1.41 | externalAuthProfile-RadAcctClient-AcctResetTime | 0 | 0 | The elapsed time to reset to the primary server, after failing to reach the primary server. |
| 1.3.6.1.4.1.529.23.142.1.1.42 | externalAuthProfile-RadAcctClient-AcctCheckpoint | 0 | 0 | Interval at which to send checkpoint packets to the daemon in minutes. |
| 1.3.6.1.4.1.529.23.142.1.1.43 | externalAuthProfile-RadAcctClient-AcctCheckpointTimer | 0 | 0 | Sets the scope of the checkpoint timer to individual sessions or all-sessions. |
| 1.3.6.1.4.1.529.23.142.1.1.44 | externalAuthProfile-RadAcctClient-AcctStopOnly | 0 | 0 | Send to RADIUS Accounting Stop packets that have username=0. These are caused by connections that are dropped before authentica… |
| 1.3.6.1.4.1.529.23.142.1.1.45 | externalAuthProfile-RadAcctClient-AcctLimitRetry | 0 | 0 | Number of retries before removing RADIUS Acct packet. 0 means leave on retry list until maximum retry entries are exceeded. |
| 1.3.6.1.4.1.529.23.142.1.1.46 | externalAuthProfile-RadAcctClient-AcctDropStopOnAuthFail | 0 | 0 | If Yes, do not send RADIUS Accounting Stop/Checkpoint packets for users that failed authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.47 | externalAuthProfile-RadAcctClient-AcctRadiusCompat | 0 | 0 | Accounting RADIUS compatibility mode. |
| 1.3.6.1.4.1.529.23.142.1.1.48 | externalAuthProfile-RadAcctClient-TunnelAccounting | 0 | 0 | Perform RFC2867 Radius Tunnel Accounting ( L2F, L2TP ). |
| 1.3.6.1.4.1.529.23.142.1.1.49 | externalAuthProfile-RadAuthServer-AuthPort | 0 | 0 | The UDP port to use for the on-board RADIUS server. |
| 1.3.6.1.4.1.529.23.142.1.1.50 | externalAuthProfile-RadAuthServer-AuthSessionKey | 0 | 0 | Enables Session key assignments. |
| 1.3.6.1.4.1.529.23.142.1.1.51 | externalAuthProfile-RadAuthServer-AuthAttributeType | 0 | 0 | The type of attributes required for session matching. |
| 1.3.6.1.4.1.529.23.142.1.1.52 | externalAuthProfile-RadAuthServer-AuthRadiusCompat | 0 | 0 | RADIUS server RADIUS compatibility mode. |
| 1.3.6.1.4.1.529.23.142.1.1.53 | externalAuthProfile-TacAuthClient-AuthServer1 | 0 | 0 | The IP address of the first TACACS authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.54 | externalAuthProfile-TacAuthClient-AuthServer2 | 0 | 0 | The IP address of the second TACACS authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.55 | externalAuthProfile-TacAuthClient-AuthServer3 | 0 | 0 | The IP address of the third TACACS authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.56 | externalAuthProfile-TacAuthClient-AuthPort | 0 | 0 | The UDP port to use for TACACS authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.57 | externalAuthProfile-TacAuthClient-AuthSrcPort | 0 | 0 | The UDP source port to use for TACACS authentication. If zero, the source port is selected from the non-privileged port range (… |
| 1.3.6.1.4.1.529.23.142.1.1.58 | externalAuthProfile-TacAuthClient-AuthKey | 0 | 0 | The RADIUS authentication access key shared with the RADIUS server. |
| 1.3.6.1.4.1.529.23.142.1.1.59 | externalAuthProfile-TacAuthClient-AuthTimeout | 0 | 0 | externalAuthProfile-TacAuthClient-Authtimeout |
| 1.3.6.1.4.1.529.23.142.1.1.60 | externalAuthProfile-TacplusAuthClient-AuthServer1 | 0 | 0 | The IP address of the first TACACS+ authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.61 | externalAuthProfile-TacplusAuthClient-AuthServer2 | 0 | 0 | The IP address of the second TACACS+ authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.62 | externalAuthProfile-TacplusAuthClient-AuthServer3 | 0 | 0 | The IP address of the third TACACS+ authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.63 | externalAuthProfile-TacplusAuthClient-AuthPort | 0 | 0 | The TCP destination port to use for TACACS+ authentication. |
| ... | ||||