Set Yes to send External Config Requests. Default is set to Yes.
Parsed from file ASCEND-MIBXAUTH-MIB.mib
Module: ASCEND-MIBXAUTH-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBXAUTH-MIB
[Automatically extracted from oidview.com]
externalAuthProfile-RadAuthClient-AllowAuthConfigRqsts OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Set Yes to send External Config Requests. Default is set to Yes." ::= { mibexternalAuthProfileEntry 29 }
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.4.1.529.23.142.1.1.1 | externalAuthProfile-Index-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.142.1.1.2 | externalAuthProfile-AuthType | 0 | 0 | externalAuthProfile-Authtype |
| 1.3.6.1.4.1.529.23.142.1.1.3 | externalAuthProfile-AcctType | 0 | 0 | The type of accounting to perform. |
| 1.3.6.1.4.1.529.23.142.1.1.4 | externalAuthProfile-RadServEnable | 0 | 0 | Whether or not the on-board RADIUS server is enabled. |
| 1.3.6.1.4.1.529.23.142.1.1.8 | externalAuthProfile-RadAuthClient-AuthPort | 0 | 0 | The UDP destination port to use for RADIUS authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.9 | externalAuthProfile-RadAuthClient-AuthSrcPort | 0 | 0 | The UDP source port to use for RADIUS authentication. If zero, the source port is selected from the non-privileged port range (… |
| 1.3.6.1.4.1.529.23.142.1.1.10 | externalAuthProfile-RadAuthClient-AuthKey | 0 | 0 | The RADIUS authentication access key shared with the RADIUS server. |
| 1.3.6.1.4.1.529.23.142.1.1.11 | externalAuthProfile-RadAuthClient-AuthPool | 0 | 0 | If TRUE an IP address is allocated from the default pool and passed to the RADIUS server during RADIUS authentication. This add… |
| 1.3.6.1.4.1.529.23.142.1.1.12 | externalAuthProfile-RadAuthClient-AuthTimeout | 0 | 0 | externalAuthProfile-RadAuthClient-Authtimeout |
| 1.3.6.1.4.1.529.23.142.1.1.13 | externalAuthProfile-RadAuthClient-AuthRspRequired | 0 | 0 | When set to Yes, entry is allowed only if the authentication server responds with an authentication of the login information. W… |
| 1.3.6.1.4.1.529.23.142.1.1.14 | externalAuthProfile-RadAuthClient-AuthIdFailReturnBusy | 0 | 0 | Return busy instead of normal call clearing when id authentication fails. |
| 1.3.6.1.4.1.529.23.142.1.1.15 | externalAuthProfile-RadAuthClient-AuthIdTimeoutReturnBusy | 0 | 0 | Return busy instead of normal call clearing when external id authentication fails. |
| 1.3.6.1.4.1.529.23.142.1.1.16 | externalAuthProfile-RadAuthClient-AuthSessInterval | 0 | 0 | Send the number-of-sessions-per-Class Attribute to the authentication server every auth-sess-interval seconds. |
| 1.3.6.1.4.1.529.23.142.1.1.17 | externalAuthProfile-RadAuthClient-AuthTSSecure | 0 | 0 | externalAuthProfile-RadAuthClient-AuthtSSecure |
| 1.3.6.1.4.1.529.23.142.1.1.18 | externalAuthProfile-RadAuthClient-AuthSend67 | 0 | 0 | If Yes, default attributes 6,7 of Radius and send them in the authentication request. |
| 1.3.6.1.4.1.529.23.142.1.1.19 | externalAuthProfile-RadAuthClient-AuthFrmAdrStart | 0 | 0 | Set Yes to send a second Radius accounting start record when the Framed-Address is assigned. Default No for backward compatibil… |
| 1.3.6.1.4.1.529.23.142.1.1.20 | externalAuthProfile-RadAuthClient-AuthBootHost | 0 | 0 | The IP address of the authentication boot host. |
| 1.3.6.1.4.1.529.23.142.1.1.21 | externalAuthProfile-RadAuthClient-AuthBootHost2 | 0 | 0 | The IP address of the secondary authentication boot host. |
| 1.3.6.1.4.1.529.23.142.1.1.22 | externalAuthProfile-RadAuthClient-AuthBootPort | 0 | 0 | The UDP port to use for RADIUS authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.23 | externalAuthProfile-RadAuthClient-AuthResetTime | 0 | 0 | The time to reset to the primary server after it has failed. |
| 1.3.6.1.4.1.529.23.142.1.1.24 | externalAuthProfile-RadAuthClient-AuthIdMaxRetryTime | 0 | 0 | Maximum time limit to spend retrying RADIUS servers when in id authentication, a value of 0 sets the limit to the internal defa… |
| 1.3.6.1.4.1.529.23.142.1.1.25 | externalAuthProfile-RadAuthClient-AuthRadiusCompat | 0 | 0 | Authentication RADIUS compatibility mode. |
| 1.3.6.1.4.1.529.23.142.1.1.26 | externalAuthProfile-RadAuthClient-AuthKeepUserName | 0 | 0 | Action if the Access-Accept packet from Radius server contains a User-Name attribute. |
| 1.3.6.1.4.1.529.23.142.1.1.27 | externalAuthProfile-RadAuthClient-AuthRealmDelimiters | 0 | 0 | Characters that delimit a realm and user name (used only if auth-keep-user-name=keep-realm-name or radius-delim_count>0) |
| 1.3.6.1.4.1.529.23.142.1.1.28 | externalAuthProfile-RadAuthClient-IdAuthPrefix | 0 | 0 | A short text string prepended to the username portion of a CLID or DNIS authentication request. |
| 1.3.6.1.4.1.529.23.142.1.1.30 | externalAuthProfile-RadAuthClient-AuthReqDelimCount | 0 | 0 | Number of delimiters to strip from a username in Radius Auth request. |
| 1.3.6.1.4.1.529.23.142.1.1.31 | externalAuthProfile-RadAuthClient-AuthReqStripSide | 0 | 0 | Side to strip chars from a username in a Radius Auth request if delim-count is > 0. |
| 1.3.6.1.4.1.529.23.142.1.1.35 | externalAuthProfile-RadAcctClient-AcctPort | 0 | 0 | The UDP destination port to use for RADIUS accounting. |
| 1.3.6.1.4.1.529.23.142.1.1.36 | externalAuthProfile-RadAcctClient-AcctSrcPort | 0 | 0 | The UDP source port to use for RADIUS accounting. If zero, the source port is selected from the non-privileged port range (1024… |
| 1.3.6.1.4.1.529.23.142.1.1.37 | externalAuthProfile-RadAcctClient-AcctKey | 0 | 0 | The RADIUS accounting access key shared with the RADIUS server. |
| 1.3.6.1.4.1.529.23.142.1.1.38 | externalAuthProfile-RadAcctClient-AcctTimeout | 0 | 0 | Number of seconds to wait for a response to previous accounting request. |
| 1.3.6.1.4.1.529.23.142.1.1.39 | externalAuthProfile-RadAcctClient-AcctSessInterval | 0 | 0 | Send the number-of-sessions-per-Class Attribute to the accounting server every acct-sess-interval seconds. |
| 1.3.6.1.4.1.529.23.142.1.1.40 | externalAuthProfile-RadAcctClient-AcctIdBase | 0 | 0 | The base value to use in reporting Account ID. |
| 1.3.6.1.4.1.529.23.142.1.1.41 | externalAuthProfile-RadAcctClient-AcctResetTime | 0 | 0 | The elapsed time to reset to the primary server, after failing to reach the primary server. |
| 1.3.6.1.4.1.529.23.142.1.1.42 | externalAuthProfile-RadAcctClient-AcctCheckpoint | 0 | 0 | Interval at which to send checkpoint packets to the daemon in minutes. |
| 1.3.6.1.4.1.529.23.142.1.1.43 | externalAuthProfile-RadAcctClient-AcctCheckpointTimer | 0 | 0 | Sets the scope of the checkpoint timer to individual sessions or all-sessions. |
| 1.3.6.1.4.1.529.23.142.1.1.44 | externalAuthProfile-RadAcctClient-AcctStopOnly | 0 | 0 | Send to RADIUS Accounting Stop packets that have username=0. These are caused by connections that are dropped before authentica… |
| 1.3.6.1.4.1.529.23.142.1.1.45 | externalAuthProfile-RadAcctClient-AcctLimitRetry | 0 | 0 | Number of retries before removing RADIUS Acct packet. 0 means leave on retry list until maximum retry entries are exceeded. |
| 1.3.6.1.4.1.529.23.142.1.1.46 | externalAuthProfile-RadAcctClient-AcctDropStopOnAuthFail | 0 | 0 | If Yes, do not send RADIUS Accounting Stop/Checkpoint packets for users that failed authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.47 | externalAuthProfile-RadAcctClient-AcctRadiusCompat | 0 | 0 | Accounting RADIUS compatibility mode. |
| 1.3.6.1.4.1.529.23.142.1.1.48 | externalAuthProfile-RadAcctClient-TunnelAccounting | 0 | 0 | Perform RFC2867 Radius Tunnel Accounting ( L2F, L2TP ). |
| 1.3.6.1.4.1.529.23.142.1.1.49 | externalAuthProfile-RadAuthServer-AuthPort | 0 | 0 | The UDP port to use for the on-board RADIUS server. |
| 1.3.6.1.4.1.529.23.142.1.1.50 | externalAuthProfile-RadAuthServer-AuthSessionKey | 0 | 0 | Enables Session key assignments. |
| 1.3.6.1.4.1.529.23.142.1.1.51 | externalAuthProfile-RadAuthServer-AuthAttributeType | 0 | 0 | The type of attributes required for session matching. |
| 1.3.6.1.4.1.529.23.142.1.1.52 | externalAuthProfile-RadAuthServer-AuthRadiusCompat | 0 | 0 | RADIUS server RADIUS compatibility mode. |
| 1.3.6.1.4.1.529.23.142.1.1.53 | externalAuthProfile-TacAuthClient-AuthServer1 | 0 | 0 | The IP address of the first TACACS authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.54 | externalAuthProfile-TacAuthClient-AuthServer2 | 0 | 0 | The IP address of the second TACACS authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.55 | externalAuthProfile-TacAuthClient-AuthServer3 | 0 | 0 | The IP address of the third TACACS authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.56 | externalAuthProfile-TacAuthClient-AuthPort | 0 | 0 | The UDP port to use for TACACS authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.57 | externalAuthProfile-TacAuthClient-AuthSrcPort | 0 | 0 | The UDP source port to use for TACACS authentication. If zero, the source port is selected from the non-privileged port range (… |
| 1.3.6.1.4.1.529.23.142.1.1.58 | externalAuthProfile-TacAuthClient-AuthKey | 0 | 0 | The RADIUS authentication access key shared with the RADIUS server. |
| 1.3.6.1.4.1.529.23.142.1.1.59 | externalAuthProfile-TacAuthClient-AuthTimeout | 0 | 0 | externalAuthProfile-TacAuthClient-Authtimeout |
| 1.3.6.1.4.1.529.23.142.1.1.60 | externalAuthProfile-TacplusAuthClient-AuthServer1 | 0 | 0 | The IP address of the first TACACS+ authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.61 | externalAuthProfile-TacplusAuthClient-AuthServer2 | 0 | 0 | The IP address of the second TACACS+ authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.62 | externalAuthProfile-TacplusAuthClient-AuthServer3 | 0 | 0 | The IP address of the third TACACS+ authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.63 | externalAuthProfile-TacplusAuthClient-AuthPort | 0 | 0 | The TCP destination port to use for TACACS+ authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.64 | externalAuthProfile-TacplusAuthClient-AuthSrcPort | 0 | 0 | The TCP source port to use for TACACS+ authentication. If zero, the source port is selected from the non-privileged port range … |
| 1.3.6.1.4.1.529.23.142.1.1.65 | externalAuthProfile-TacplusAuthClient-AuthKey | 0 | 0 | The Tacacs+ authentication access key shared with the TACACS+ server. |
| 1.3.6.1.4.1.529.23.142.1.1.66 | externalAuthProfile-TacplusAuthClient-AuthTimeoutTime | 0 | 0 | externalAuthProfile-TacplusAuthClient-AuthtimeoutTime |
| 1.3.6.1.4.1.529.23.142.1.1.67 | externalAuthProfile-TacplusAuthClient-AuthRetries | 0 | 0 | The number of times to retry the auth hosts before giving up. |
| 1.3.6.1.4.1.529.23.142.1.1.68 | externalAuthProfile-TacplusAcctClient-AcctServer1 | 0 | 0 | The IP address of the first TACACS+ accounting server. |
| 1.3.6.1.4.1.529.23.142.1.1.69 | externalAuthProfile-TacplusAcctClient-AcctServer2 | 0 | 0 | The IP address of the second TACACS+ accounting server. |
| 1.3.6.1.4.1.529.23.142.1.1.70 | externalAuthProfile-TacplusAcctClient-AcctServer3 | 0 | 0 | The IP address of the third TACACS+ accounting server. |
| 1.3.6.1.4.1.529.23.142.1.1.71 | externalAuthProfile-TacplusAcctClient-AcctPort | 0 | 0 | The TCP destination port to use for TACACS+ accounting. |
| 1.3.6.1.4.1.529.23.142.1.1.72 | externalAuthProfile-TacplusAcctClient-AcctSrcPort | 0 | 0 | The TCP source port to use for TACACS+ accounting. If zero, the source port is selected from the non-privileged port range (102… |
| 1.3.6.1.4.1.529.23.142.1.1.73 | externalAuthProfile-TacplusAcctClient-AcctKey | 0 | 0 | The TACACS+ accounting access key shared with the TACACS+ server. |
| 1.3.6.1.4.1.529.23.142.1.1.74 | externalAuthProfile-SecureidAuthClient-AuthServer1 | 0 | 0 | The IP address of the first authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.75 | externalAuthProfile-SecureidAuthClient-AuthServer2 | 0 | 0 | The IP address of the second authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.76 | externalAuthProfile-SecureidAuthClient-AuthServer3 | 0 | 0 | The IP address of the third authentication server. |
| 1.3.6.1.4.1.529.23.142.1.1.77 | externalAuthProfile-SecureidAuthClient-AuthPort | 0 | 0 | The UDP destination port to use for authentication. |
| 1.3.6.1.4.1.529.23.142.1.1.78 | externalAuthProfile-SecureidAuthClient-AuthTimeout | 0 | 0 | externalAuthProfile-SecureidAuthClient-Authtimeout |
| 1.3.6.1.4.1.529.23.142.1.1.79 | externalAuthProfile-SecureidAuthClient-AuthRetrycount | 0 | 0 | Number of times to retry an authentication attempt. |
| ... | ||||