When set to No, do not send dsx3LineStatusChangeTrapEnable trap. If Yes, send traps. The default is No.
Parsed from file ASCEND-MIBE3ATMNET-MIB.mib
Module: ASCEND-MIBE3ATMNET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBE3ATMNET-MIB
[Automatically extracted from oidview.com]
e3AtmNetworkProfile-LineConfig-StatusChangeTrapEnable OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "When set to No, do not send dsx3LineStatusChangeTrapEnable trap. If Yes, send traps. The default is No." ::= { mibe3AtmNetworkProfileEntry 28 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.15.1.1.1 | e3AtmNetworkProfile-Shelf-o, e3AtmNetworkProfile__shelf__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.15.1.1.2 | e3AtmNetworkProfile-Slot-o, e3AtmNetworkProfile__slot__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.15.1.1.3 | e3AtmNetworkProfile-Item-o, e3AtmNetworkProfile__item__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.15.1.1.4 | e3AtmNetworkProfile-Name, e3AtmNetworkProfile__name | 0 | 0 | For future use. The current design does not use the name field but instead references E3-ATM lines by the physical address; we … |
| 1.3.6.1.4.1.529.23.15.1.1.5 | e3AtmNetworkProfile-PhysicalAddress-Shelf, e3AtmNetworkProfile__physical_address__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.6 | e3AtmNetworkProfile-PhysicalAddress-Slot, e3AtmNetworkProfile__physical_address__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.7 | e3AtmNetworkProfile-PhysicalAddress-ItemNumber, e3AtmNetworkProfile__physical_address__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.15.1.1.8 | e3AtmNetworkProfile-Enabled, e3AtmNetworkProfile__enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.1.1.9 | e3AtmNetworkProfile-LineConfig-TrunkGroup, e3AtmNetworkProfile__line_config__trunk_group | 0 | 0 | The trunk group to which this line is assigned. 0 means this line is not part of a trunk group. |
| 1.3.6.1.4.1.529.23.15.1.1.10 | e3AtmNetworkProfile-LineConfig-NailedGroup, e3AtmNetworkProfile__line_config__nailed_group | 0 | 0 | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.15.1.1.11 | e3AtmNetworkProfile__line_config__call_route_info__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.12 | e3AtmNetworkProfile__line_config__call_route_info__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.13 | e3AtmNetworkProfile__line_config__call_route_info__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.15.1.1.14 | e3AtmNetworkProfile-LineConfig-Loopback, e3AtmNetworkProfile__line_config__loopback | 0 | 0 | Loopback mode. |
| 1.3.6.1.4.1.529.23.15.1.1.15 | e3AtmNetworkProfile-LineConfig-HighTxOutput, e3AtmNetworkProfile__line_config__high_tx_output | 0 | 0 | e3AtmNetworkProfile-LineConfig-HightxOutput |
| 1.3.6.1.4.1.529.23.15.1.1.16 | e3AtmNetworkProfile-LineConfig-FramerMode, e3AtmNetworkProfile__line_config__framer_mode | 0 | 0 | The E3 ATM framer mode. |
| 1.3.6.1.4.1.529.23.15.1.1.17 | e3AtmNetworkProfile-LineConfig-VpiVciRange, e3AtmNetworkProfile__line_config__vpi_vci_range | 0 | 0 | The E3 ATM valid VPI/VCI value range. |
| 1.3.6.1.4.1.529.23.15.1.1.18 | e3AtmNetworkProfile-LineConfig-CellPayloadScramble, e3AtmNetworkProfile__line_config__cell_payload_scramble | 0 | 0 | TRUE if the cell payload scrambling is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.1.1.19 | e3AtmNetworkProfile-Action-o, e3AtmNetworkProfile__action__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.15.1.1.20 | e3AtmNetworkProfile-LineConfig-ReceiveEqualization, e3AtmNetworkProfile__line_config__receive_equalization | 0 | 0 | TRUE if receive equalization is needed, otherwise FALSE. Receive equalization is needed if the cable length is more than 300 ft. |
| 1.3.6.1.4.1.529.23.15.1.1.21 | e3AtmNetworkProfile-LineConfig-ClockSource, e3AtmNetworkProfile__line_config__clock_source | 0 | 0 | Determine whether the 8KHz clock from the E3-ATM board is eligible to be used as the system-wide TDM clock source. |
| 1.3.6.1.4.1.529.23.15.1.1.22 | e3AtmNetworkProfile-LineConfig-ClockPriority, e3AtmNetworkProfile__line_config__clock_priority | 0 | 0 | Clock priority assigned to the E3-ATM line. Used to select a particular E3 line as clock source. |
| 1.3.6.1.4.1.529.23.15.1.1.23 | e3AtmNetworkProfile-SparePhysicalAddress-Shelf, e3AtmNetworkProfile__spare_physical_address__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.24 | e3AtmNetworkProfile-SparePhysicalAddress-Slot, e3AtmNetworkProfile__spare_physical_address__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.25 | e3AtmNetworkProfile-SparePhysicalAddress-ItemNumber, e3AtmNetworkProfile__spare_physical_address__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.15.1.1.26 | e3AtmNetworkProfile-SparingMode, e3AtmNetworkProfile__sparing_mode | 0 | 0 | Trunk port sparing operational mode for this port. |
| 1.3.6.1.4.1.529.23.15.1.1.27 | e3AtmNetworkProfile-IgnoreLineup | 0 | 0 | Ignore line up value for this port. |