The number of the slot that the addressed physical device resides on.
Parsed from file mibe3atmnet.mib.txt
Company: None
Module: ASCEND-MIBE3ATMNETWORKPROFILE-MIB
The number of the slot that the addressed physical device resides on.
Parsed from file ASCEND-MIBE3ATMNET-MIB.mib
Module: ASCEND-MIBE3ATMNET-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBE3ATMNET-MIB
[Automatically extracted from oidview.com]
e3AtmNetworkProfile__physical_address__slot OBJECT-TYPE SYNTAX INTEGER { any_slot (1), slot_1 (2), slot_2 (3), slot_3 (4), slot_4 (5), slot_5 (6), slot_6 (7), slot_7 (8), slot_8 (9), slot_9 (10), slot_10 (11), slot_11 (12), slot_12 (13), slot_13 (14), slot_14 (15), slot_15 (16), slot_16 (17), slot_17 (18), slot_18 (19), slot_19 (20), slot_20 (21), slot_21 (22), slot_22 (23), slot_23 (24), slot_24 (25), slot_25 (26), slot_26 (27), slot_27 (28), slot_28 (29), slot_29 (30), slot_30 (31), slot_31 (32), slot_32 (33), slot_33 (34), slot_34 (35), slot_35 (36), slot_36 (37), slot_37 (38), slot_38 (39), slot_39 (40), slot_40 (41), left_controller (49), right_controller (50), controller (42), trunk_module_1 (45), trunk_module_2 (46), control_module (51), end_of_slots (52) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot that the addressed physical device resides on." ::= { mibe3AtmNetworkProfileEntry 6 }
e3AtmNetworkProfile-PhysicalAddress-Slot OBJECT-TYPE SYNTAX INTEGER { anySlot (1), slot1 (2), slot2 (3), slot3 (4), slot4 (5), slot5 (6), slot6 (7), slot7 (8), slot8 (9), slot9 (10), slot10 (11), slot11 (12), slot12 (13), slot13 (14), slot14 (15), slot15 (16), slot16 (17), slot17 (18), slot18 (19), slot19 (20), slot20 (21), slot21 (22), slot22 (23), slot23 (24), slot24 (25), slot25 (26), slot26 (27), slot27 (28), slot28 (29), slot29 (30), slot30 (31), slot31 (32), slot32 (33), slot33 (34), slot34 (35), slot35 (36), slot36 (37), slot37 (38), slot38 (39), slot39 (40), slot40 (41), aLim (55), bLim (56), cLim (57), dLim (58), leftController (49), rightController (50), controller (42), firstControlModule (53), secondControlModule (54), trunkModule1 (45), trunkModule2 (46), controlModule (51), slotPrimary (59) } ACCESS read-write STATUS mandatory DESCRIPTION "The number of the slot that the addressed physical device resides on." ::= { mibe3AtmNetworkProfileEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.15.1.1.1 | e3AtmNetworkProfile-Shelf-o, e3AtmNetworkProfile__shelf__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.15.1.1.2 | e3AtmNetworkProfile-Slot-o, e3AtmNetworkProfile__slot__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.15.1.1.3 | e3AtmNetworkProfile-Item-o, e3AtmNetworkProfile__item__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.15.1.1.4 | e3AtmNetworkProfile-Name, e3AtmNetworkProfile__name | 0 | 0 | For future use. The current design does not use the name field but instead references E3-ATM lines by the physical address; we … |
| 1.3.6.1.4.1.529.23.15.1.1.5 | e3AtmNetworkProfile-PhysicalAddress-Shelf, e3AtmNetworkProfile__physical_address__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.7 | e3AtmNetworkProfile-PhysicalAddress-ItemNumber, e3AtmNetworkProfile__physical_address__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.15.1.1.8 | e3AtmNetworkProfile-Enabled, e3AtmNetworkProfile__enabled | 0 | 0 | TRUE if the line is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.1.1.9 | e3AtmNetworkProfile-LineConfig-TrunkGroup, e3AtmNetworkProfile__line_config__trunk_group | 0 | 0 | The trunk group to which this line is assigned. 0 means this line is not part of a trunk group. |
| 1.3.6.1.4.1.529.23.15.1.1.10 | e3AtmNetworkProfile-LineConfig-NailedGroup, e3AtmNetworkProfile__line_config__nailed_group | 0 | 0 | A number that identifies the set of lines that makes up a nailed group. 0 means this line is not part of a nailed group. |
| 1.3.6.1.4.1.529.23.15.1.1.11 | e3AtmNetworkProfile__line_config__call_route_info__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.12 | e3AtmNetworkProfile__line_config__call_route_info__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.13 | e3AtmNetworkProfile__line_config__call_route_info__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.15.1.1.14 | e3AtmNetworkProfile-LineConfig-Loopback, e3AtmNetworkProfile__line_config__loopback | 0 | 0 | Loopback mode. |
| 1.3.6.1.4.1.529.23.15.1.1.15 | e3AtmNetworkProfile-LineConfig-HighTxOutput, e3AtmNetworkProfile__line_config__high_tx_output | 0 | 0 | e3AtmNetworkProfile-LineConfig-HightxOutput |
| 1.3.6.1.4.1.529.23.15.1.1.16 | e3AtmNetworkProfile-LineConfig-FramerMode, e3AtmNetworkProfile__line_config__framer_mode | 0 | 0 | The E3 ATM framer mode. |
| 1.3.6.1.4.1.529.23.15.1.1.17 | e3AtmNetworkProfile-LineConfig-VpiVciRange, e3AtmNetworkProfile__line_config__vpi_vci_range | 0 | 0 | The E3 ATM valid VPI/VCI value range. |
| 1.3.6.1.4.1.529.23.15.1.1.18 | e3AtmNetworkProfile-LineConfig-CellPayloadScramble, e3AtmNetworkProfile__line_config__cell_payload_scramble | 0 | 0 | TRUE if the cell payload scrambling is enabled, otherwise FALSE. |
| 1.3.6.1.4.1.529.23.15.1.1.19 | e3AtmNetworkProfile-Action-o, e3AtmNetworkProfile__action__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.15.1.1.20 | e3AtmNetworkProfile-LineConfig-ReceiveEqualization, e3AtmNetworkProfile__line_config__receive_equalization | 0 | 0 | TRUE if receive equalization is needed, otherwise FALSE. Receive equalization is needed if the cable length is more than 300 ft. |
| 1.3.6.1.4.1.529.23.15.1.1.21 | e3AtmNetworkProfile-LineConfig-ClockSource, e3AtmNetworkProfile__line_config__clock_source | 0 | 0 | Determine whether the 8KHz clock from the E3-ATM board is eligible to be used as the system-wide TDM clock source. |
| 1.3.6.1.4.1.529.23.15.1.1.22 | e3AtmNetworkProfile-LineConfig-ClockPriority, e3AtmNetworkProfile__line_config__clock_priority | 0 | 0 | Clock priority assigned to the E3-ATM line. Used to select a particular E3 line as clock source. |
| 1.3.6.1.4.1.529.23.15.1.1.23 | e3AtmNetworkProfile-SparePhysicalAddress-Shelf, e3AtmNetworkProfile__spare_physical_address__shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.24 | e3AtmNetworkProfile-SparePhysicalAddress-Slot, e3AtmNetworkProfile__spare_physical_address__slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.15.1.1.25 | e3AtmNetworkProfile-SparePhysicalAddress-ItemNumber, e3AtmNetworkProfile__spare_physical_address__item_number | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.15.1.1.26 | e3AtmNetworkProfile-SparingMode, e3AtmNetworkProfile__sparing_mode | 0 | 0 | Trunk port sparing operational mode for this port. |
| 1.3.6.1.4.1.529.23.15.1.1.27 | e3AtmNetworkProfile-IgnoreLineup | 0 | 0 | Ignore line up value for this port. |
| 1.3.6.1.4.1.529.23.15.1.1.28 | e3AtmNetworkProfile-LineConfig-StatusChangeTrapEnable | 0 | 0 | When set to No, do not send dsx3LineStatusChangeTrapEnable trap. If Yes, send traps. The default is No. |