Interface groups index assigned to this physical port.
Parsed from file ASCEND-MIBSTAT-MIB.mib
Module: ASCEND-MIBSTAT-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBSTAT-MIB
[Automatically extracted from oidview.com]
sdslLineStatus-PhysicalStatus-IfGroupIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Interface groups index assigned to this physical port." ::= { mibsdslLineStatusEntry 18 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.23.180.1.1.1 | sdslLineStatus-Shelf-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.180.1.1.2 | sdslLineStatus-Slot-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.180.1.1.3 | sdslLineStatus-Item-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.180.1.1.4 | sdslLineStatus-PhysicalAddress-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.180.1.1.5 | sdslLineStatus-PhysicalAddress-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.180.1.1.6 | sdslLineStatus-PhysicalAddress-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
1.3.6.1.4.1.529.23.180.1.1.7 | sdslLineStatus-LineState | 0 | 0 | The overall state of the line. |
1.3.6.1.4.1.529.23.180.1.1.8 | sdslLineStatus-SparePhysicalAddress-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.180.1.1.9 | sdslLineStatus-SparePhysicalAddress-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.180.1.1.10 | sdslLineStatus-SparePhysicalAddress-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
1.3.6.1.4.1.529.23.180.1.1.11 | sdslLineStatus-SparingState | 0 | 0 | The sparing state of the line. |
1.3.6.1.4.1.529.23.180.1.1.12 | sdslLineStatus-SparingChangeReason | 0 | 0 | The reason for the last sparing state change. |
1.3.6.1.4.1.529.23.180.1.1.13 | sdslLineStatus-SparingChangeTime | 0 | 0 | The time of the last sparing state change. |
1.3.6.1.4.1.529.23.180.1.1.14 | sdslLineStatus-SparingChangeCounter | 0 | 0 | The number of sparing state changes. |
1.3.6.1.4.1.529.23.180.1.1.15 | sdslLineStatus-VpiVciRange | 0 | 0 | The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot. |
1.3.6.1.4.1.529.23.180.1.1.16 | sdslLineStatus-VpSwitchingVpi | 0 | 0 | VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching. |
1.3.6.1.4.1.529.23.180.1.1.17 | sdslLineStatus-ErrorCount | 0 | 0 | The number of errors experienced by the line. |
1.3.6.1.4.1.529.23.180.1.1.19 | sdslLineStatus-PhysicalStatus-UnitType | 0 | 0 | Unit types defines if the node is operating Central Office or Customer Premise equipment software. |
1.3.6.1.4.1.529.23.180.1.1.20 | sdslLineStatus-PhysicalStatus-DevLineState | 0 | 0 | None |
1.3.6.1.4.1.529.23.180.1.1.21 | sdslLineStatus-PhysicalStatus-UpStreamRate | 0 | 0 | Current upstream interface rate. |
1.3.6.1.4.1.529.23.180.1.1.22 | sdslLineStatus-PhysicalStatus-DownStreamRate | 0 | 0 | Current down stream interface rate. |
1.3.6.1.4.1.529.23.180.1.1.23 | sdslLineStatus-PhysicalStatus-MajorFirmwareVer | 0 | 0 | Firmware major version ID. |
1.3.6.1.4.1.529.23.180.1.1.24 | sdslLineStatus-PhysicalStatus-MinorFirmwareVer | 0 | 0 | Firmwares minor version ID. |
1.3.6.1.4.1.529.23.180.1.1.25 | sdslLineStatus-PhysicalStatus-HardwareVer | 0 | 0 | Hardware chip version. |
1.3.6.1.4.1.529.23.180.1.1.26 | sdslLineStatus-PhysicalStatistic-LineUpTimer-Days | 0 | 0 | Number of days that the DSL line has been up. |
1.3.6.1.4.1.529.23.180.1.1.27 | sdslLineStatus-PhysicalStatistic-LineUpTimer-Hours | 0 | 0 | Number of hours that the DSL line has been up. |
1.3.6.1.4.1.529.23.180.1.1.28 | sdslLineStatus-PhysicalStatistic-LineUpTimer-Minutes | 0 | 0 | Number of minutes that the DSL line has been up. |
1.3.6.1.4.1.529.23.180.1.1.29 | sdslLineStatus-PhysicalStatistic-RxSignalPresent | 0 | 0 | State if the receive signal is present or not. |
1.3.6.1.4.1.529.23.180.1.1.30 | sdslLineStatus-PhysicalStatistic-LineQuality | 0 | 0 | While the port is in the up state, this parameter displays the line quality. |
1.3.6.1.4.1.529.23.180.1.1.31 | sdslLineStatus-PhysicalStatistic-UpDwnCntr | 0 | 0 | Interface Up Down counter value displays the number of times the interface trasitions from a down to up state. |
1.3.6.1.4.1.529.23.180.1.1.32 | sdslLineStatus-PhysicalStatistic-SelfTest | 0 | 0 | Hardware/firmware self test results. |
1.3.6.1.4.1.529.23.180.1.1.33 | sdslLineStatus-PhysicalStatistic-FarEndDbAttenuation | 0 | 0 | Receive signal attenuation. |
1.3.6.1.4.1.529.23.180.1.1.34 | sdslLineStatus-PhysicalStatistic-FirmwareStartupStage | 0 | 0 | Current firmware state. |
1.3.6.1.4.1.529.23.180.1.1.35 | sdslLineStatus-PhysicalStatistic-HdlcRxCrcErrorCnt | 0 | 0 | While the port is in the up state, this parameter displays the number of HDLC CRC errors associated with this channel. If thereā¦ |
1.3.6.1.4.1.529.23.180.1.1.36 | sdslLineStatus-Action-o | 0 | 0 | None |