Vendor: Ascend Communications Inc.
Module: ASCEND-MIBSTAT-MIB
[Automatically extracted from oidview.com]
sdslLineStatus-PhysicalStatus-DevLineState OBJECT-TYPE SYNTAX INTEGER { config (1), deactivate (2), inactive (3), activating (4), activeRx (5), portUp (6), portupPendingDeactivate (7), deactivateLost (8), hardwareTest (9), outOfService (10), tipRingDetect (11), foreverBert (12), tipWait1 (13), tipHunt (14), tipWait2 (15), alteraTipHunt (19), cellDelination (16), deactivateWait (17), preact (20), preactWait (21) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the current interface state. config ::= { mibsdslLineStatusEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.180.1.1.1 | sdslLineStatus-Shelf-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.180.1.1.2 | sdslLineStatus-Slot-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.180.1.1.3 | sdslLineStatus-Item-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.180.1.1.4 | sdslLineStatus-PhysicalAddress-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.180.1.1.5 | sdslLineStatus-PhysicalAddress-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.180.1.1.6 | sdslLineStatus-PhysicalAddress-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.180.1.1.7 | sdslLineStatus-LineState | 0 | 0 | The overall state of the line. |
| 1.3.6.1.4.1.529.23.180.1.1.8 | sdslLineStatus-SparePhysicalAddress-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.180.1.1.9 | sdslLineStatus-SparePhysicalAddress-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.180.1.1.10 | sdslLineStatus-SparePhysicalAddress-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.180.1.1.11 | sdslLineStatus-SparingState | 0 | 0 | The sparing state of the line. |
| 1.3.6.1.4.1.529.23.180.1.1.12 | sdslLineStatus-SparingChangeReason | 0 | 0 | The reason for the last sparing state change. |
| 1.3.6.1.4.1.529.23.180.1.1.13 | sdslLineStatus-SparingChangeTime | 0 | 0 | The time of the last sparing state change. |
| 1.3.6.1.4.1.529.23.180.1.1.14 | sdslLineStatus-SparingChangeCounter | 0 | 0 | The number of sparing state changes. |
| 1.3.6.1.4.1.529.23.180.1.1.15 | sdslLineStatus-VpiVciRange | 0 | 0 | The valid range of vpi and vci for the circuits established for the line. This range can change only after LIM reboot. |
| 1.3.6.1.4.1.529.23.180.1.1.16 | sdslLineStatus-VpSwitchingVpi | 0 | 0 | VPI to be used for the VP switching. Rest of the VPIs will be used for the VC switching. |
| 1.3.6.1.4.1.529.23.180.1.1.17 | sdslLineStatus-ErrorCount | 0 | 0 | The number of errors experienced by the line. |
| 1.3.6.1.4.1.529.23.180.1.1.18 | sdslLineStatus-PhysicalStatus-IfGroupIndex | 0 | 0 | Interface groups index assigned to this physical port. |
| 1.3.6.1.4.1.529.23.180.1.1.19 | sdslLineStatus-PhysicalStatus-UnitType | 0 | 0 | Unit types defines if the node is operating Central Office or Customer Premise equipment software. |
| 1.3.6.1.4.1.529.23.180.1.1.21 | sdslLineStatus-PhysicalStatus-UpStreamRate | 0 | 0 | Current upstream interface rate. |
| 1.3.6.1.4.1.529.23.180.1.1.22 | sdslLineStatus-PhysicalStatus-DownStreamRate | 0 | 0 | Current down stream interface rate. |
| 1.3.6.1.4.1.529.23.180.1.1.23 | sdslLineStatus-PhysicalStatus-MajorFirmwareVer | 0 | 0 | Firmware major version ID. |
| 1.3.6.1.4.1.529.23.180.1.1.24 | sdslLineStatus-PhysicalStatus-MinorFirmwareVer | 0 | 0 | Firmwares minor version ID. |
| 1.3.6.1.4.1.529.23.180.1.1.25 | sdslLineStatus-PhysicalStatus-HardwareVer | 0 | 0 | Hardware chip version. |
| 1.3.6.1.4.1.529.23.180.1.1.26 | sdslLineStatus-PhysicalStatistic-LineUpTimer-Days | 0 | 0 | Number of days that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.180.1.1.27 | sdslLineStatus-PhysicalStatistic-LineUpTimer-Hours | 0 | 0 | Number of hours that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.180.1.1.28 | sdslLineStatus-PhysicalStatistic-LineUpTimer-Minutes | 0 | 0 | Number of minutes that the DSL line has been up. |
| 1.3.6.1.4.1.529.23.180.1.1.29 | sdslLineStatus-PhysicalStatistic-RxSignalPresent | 0 | 0 | State if the receive signal is present or not. |
| 1.3.6.1.4.1.529.23.180.1.1.30 | sdslLineStatus-PhysicalStatistic-LineQuality | 0 | 0 | While the port is in the up state, this parameter displays the line quality. |
| 1.3.6.1.4.1.529.23.180.1.1.31 | sdslLineStatus-PhysicalStatistic-UpDwnCntr | 0 | 0 | Interface Up Down counter value displays the number of times the interface trasitions from a down to up state. |
| 1.3.6.1.4.1.529.23.180.1.1.32 | sdslLineStatus-PhysicalStatistic-SelfTest | 0 | 0 | Hardware/firmware self test results. |
| 1.3.6.1.4.1.529.23.180.1.1.33 | sdslLineStatus-PhysicalStatistic-FarEndDbAttenuation | 0 | 0 | Receive signal attenuation. |
| 1.3.6.1.4.1.529.23.180.1.1.34 | sdslLineStatus-PhysicalStatistic-FirmwareStartupStage | 0 | 0 | Current firmware state. |
| 1.3.6.1.4.1.529.23.180.1.1.35 | sdslLineStatus-PhysicalStatistic-HdlcRxCrcErrorCnt | 0 | 0 | While the port is in the up state, this parameter displays the number of HDLC CRC errors associated with this channel. If there… |
| 1.3.6.1.4.1.529.23.180.1.1.36 | sdslLineStatus-Action-o | 0 | 0 | None |