Selection of the CLID. An incoming call can optionally specify several CLIDs. A CLID provided by the PSTN (network provided) is considered secure. A CLID provided by the end user (user provided) is secure only if it has been validated by the PSTN (user provided, network verified and passed). Other forms of user CLIDs are considered unsecure.
Parsed from file mibanswer.mib.txt
Company: None
Module: ASCEND-MIBANSWERPROFILE-MIB
Selection of the CLID. An incoming call can optionally specify several CLIDs. A CLID provided by the PSTN (network provided) is considered secure. A CLID provided by the end user (user provided) is secure only if it has been validated by the PSTN (user provided, network verified and passed). Other forms of user CLIDs are considered unsecure.
Parsed from file ASCEND-MIBANSWER-MIB.mib
Module: ASCEND-MIBANSWER-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBANSWER-MIB
[Automatically extracted from oidview.com]
answerProfile__clid_selection OBJECT-TYPE SYNTAX INTEGER { first (1), secure_prefer (2), secure_require (3), user_prefer (4), user_require (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the CLID. An incoming call can optionally specify several CLIDs. A CLID provided by the PSTN (network provided) is considered secure. A CLID provided by the end user (user provided) is secure only if it has been validated by the PSTN (user provided, network verified and passed). Other forms of user CLIDs are considered unsecure." ::= { mibanswerProfileEntry 73 }
answerProfile-ClidSelection OBJECT-TYPE SYNTAX INTEGER { first (1), securePrefer (2), secureRequire (3), userPrefer (4), userRequire (5) } ACCESS read-write STATUS mandatory DESCRIPTION "Selection of the CLID. An incoming call can optionally specify several CLIDs. A CLID provided by the PSTN (network provided) is considered secure. A CLID provided by the end user (user provided) is secure only if it has been validated by the PSTN (user provided, network verified and passed). Other forms of user CLIDs are considered unsecure." ::= { mibanswerProfileEntry 73 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.3.1.1.1 | answerProfile-Index-o, answerProfile__index__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.3.1.1.2 | answerProfile-UseAnswerForAllDefaults, answerProfile__use_answer_for_all_defaults | 0 | 0 | When set to Yes, this profile will provide the default values for fields when building profiles. When set to No the factory pro… |
| 1.3.6.1.4.1.529.23.3.1.1.3 | answerProfile-Force56kbps, answerProfile__force_56kbps | 0 | 0 | If yes then inbound 64 kbps calls are connected at 56 kbps. |
| 1.3.6.1.4.1.529.23.3.1.1.4 | answerProfile-ProfilesRequired, answerProfile__profiles_required | 0 | 0 | Unused when incoming authentication is used. When authentication is not used a No value in this field indicates that we will cr… |
| 1.3.6.1.4.1.529.23.3.1.1.5 | answerProfile-ClidAuthMode, answerProfile__clid_auth_mode | 0 | 0 | Specifies how calling line identification (CLID) will be used for incoming call authentication. |
| 1.3.6.1.4.1.529.23.3.1.1.6 | answerProfile-PppAnswer-Enabled, answerProfile__ppp_answer__enabled | 0 | 0 | Set to Yes to enable incoming PPP calls. This includes the PPP variants, MP and MPP. |
| 1.3.6.1.4.1.529.23.3.1.1.7 | answerProfile-PppAnswer-ReceiveAuthMode, answerProfile__ppp_answer__receive_auth_mode | 0 | 0 | The type of PPP authentication to use for incoming calls. |
| 1.3.6.1.4.1.529.23.3.1.1.8 | answerProfile-PppAnswer-DisconnectOnAuthTimeout, answerProfile__ppp_answer__disconnect_on_auth_timeout | 0 | 0 | ???. |
| 1.3.6.1.4.1.529.23.3.1.1.9 | answerProfile-PppAnswer-BridgingGroup, answerProfile__ppp_answer__bridging_group | 0 | 0 | The default bridging group. Interfaces with the same bridging group can bridge to each other. Set to 0 to disable bridging. |
| 1.3.6.1.4.1.529.23.3.1.1.10 | answerProfile-PppAnswer-LinkCompression, answerProfile__ppp_answer__link_compression | 0 | 0 | The default type of link compression to use for PPP, MP, and MPP calls. |
| 1.3.6.1.4.1.529.23.3.1.1.11 | answerProfile-PppAnswer-Mru, answerProfile__ppp_answer__mru | 0 | 0 | The Maximum Receive Unit, i.e. the largest frame we will accept. |
| 1.3.6.1.4.1.529.23.3.1.1.12 | answerProfile-PppAnswer-Lqm, answerProfile__ppp_answer__lqm | 0 | 0 | Link Quality Monitoring. Set to Yes to enable the PPP LQM protocol. |
| 1.3.6.1.4.1.529.23.3.1.1.13 | answerProfile-PppAnswer-LqmMinimumPeriod, answerProfile__ppp_answer__lqm_minimum_period | 0 | 0 | The minimum period, in 1/100 of a second, that we will accept/send link quality monitoring packets. |
| 1.3.6.1.4.1.529.23.3.1.1.14 | answerProfile-PppAnswer-LqmMaximumPeriod, answerProfile__ppp_answer__lqm_maximum_period | 0 | 0 | The maximum period, in 1/100 of a second, that we will accept/send link quality monitoring packets. |
| 1.3.6.1.4.1.529.23.3.1.1.15 | answerProfile-MpAnswer-Enabled, answerProfile__mp_answer__enabled | 0 | 0 | Set to Yes to enable incoming MP calls. This includes the MP variant, MPP. |
| 1.3.6.1.4.1.529.23.3.1.1.16 | answerProfile-MpAnswer-MinimumChannels, answerProfile__mp_answer__minimum_channels | 0 | 0 | The default value for the minimum number of channels in a multi-channel call. |
| 1.3.6.1.4.1.529.23.3.1.1.17 | answerProfile-MpAnswer-MaximumChannels, answerProfile__mp_answer__maximum_channels | 0 | 0 | The default value for the maximum number of channels in a multi-channel call. |
| 1.3.6.1.4.1.529.23.3.1.1.18 | answerProfile-MpAnswer-BacpEnable, answerProfile__mp_answer__bacp_enable | 0 | 0 | Enable Bandwidth Allocation Control Protocol (BACP). |
| 1.3.6.1.4.1.529.23.3.1.1.19 | answerProfile-MppAnswer-Enabled, answerProfile__mpp_answer__enabled | 0 | 0 | Set to Yes to enable incoming MPP calls. |
| 1.3.6.1.4.1.529.23.3.1.1.20 | answerProfile-MppAnswer-DynamicAlgorithm, answerProfile__mpp_answer__dynamic_algorithm | 0 | 0 | The algorithm to use to calculate the average link utilization. Bandwidth changes are performed on the average utilization, not… |
| 1.3.6.1.4.1.529.23.3.1.1.21 | answerProfile-MppAnswer-BandwidthMonitorDirection, answerProfile__mpp_answer__bandwidth_monitor_direction | 0 | 0 | The direction to monitor link utilization. A unit can monitor transmit, transmit and receive, or turn off monitoring entirely. |
| 1.3.6.1.4.1.529.23.3.1.1.22 | answerProfile-MppAnswer-IncrementChannelCount, answerProfile__mpp_answer__increment_channel_count | 0 | 0 | Number of channels to increment as a block. |
| 1.3.6.1.4.1.529.23.3.1.1.23 | answerProfile-MppAnswer-DecrementChannelCount, answerProfile__mpp_answer__decrement_channel_count | 0 | 0 | Number of channels to decrement as a block. |
| 1.3.6.1.4.1.529.23.3.1.1.24 | answerProfile-MppAnswer-SecondsHistory, answerProfile__mpp_answer__seconds_history | 0 | 0 | The number of seconds of history that link utilization is averaged over to make bandwidth changes. |
| 1.3.6.1.4.1.529.23.3.1.1.25 | answerProfile-MppAnswer-AddPersistence, answerProfile__mpp_answer__add_persistence | 0 | 0 | The number of seconds of that the average line utilization must exceed the target utilization before bandwidth will be added. |
| 1.3.6.1.4.1.529.23.3.1.1.26 | answerProfile-MppAnswer-SubPersistence, answerProfile__mpp_answer__sub_persistence | 0 | 0 | The number of seconds of that the average line utilization must fall below the target utilization before bandwidth will be redu… |
| 1.3.6.1.4.1.529.23.3.1.1.27 | answerProfile-MppAnswer-TargetUtilization, answerProfile__mpp_answer__target_utilization | 0 | 0 | The default value for the target utilization. Bandwidth changes occur when the average utilization exceeds or falls below this … |
| 1.3.6.1.4.1.529.23.3.1.1.28 | answerProfile-FrAnswer-Enabled, answerProfile__fr_answer__enabled | 0 | 0 | Set to yes to enable incoming FR calls. |
| 1.3.6.1.4.1.529.23.3.1.1.29 | answerProfile-TcpClearAnswer-Enabled, answerProfile__tcp_clear_answer__enabled | 0 | 0 | If enabled, incoming calls that match a local profile with a call management type of tcp-raw will automatically be connected vi… |
| 1.3.6.1.4.1.529.23.3.1.1.30 | answerProfile-AraAnswer-Enabled, answerProfile__ara_answer__enabled | 0 | 0 | Set to yes to enable incoming ARA calls. |
| 1.3.6.1.4.1.529.23.3.1.1.31 | answerProfile-V120Answer-Enabled, answerProfile__v120_answer__enabled | 0 | 0 | Set to yes to enable incoming V120 calls. |
| 1.3.6.1.4.1.529.23.3.1.1.32 | answerProfile-V120Answer-FrameLength, answerProfile__v120_answer__frame_length | 0 | 0 | The default frame length to use for incoming V.120 connections. |
| 1.3.6.1.4.1.529.23.3.1.1.33 | answerProfile-X25Answer-Enabled, answerProfile__x25_answer__enabled | 0 | 0 | If enabled, incoming calls that match a local profile with a call management type of x25 will be accepted. |
| 1.3.6.1.4.1.529.23.3.1.1.34 | answerProfile-X25Answer-X25Profile, answerProfile__x25_answer__x25_profile | 0 | 0 | Name of the x25 profile that this profile is associated with. |
| 1.3.6.1.4.1.529.23.3.1.1.35 | answerProfile-X25Answer-X3Profile, answerProfile__x25_answer__x3_profile | 0 | 0 | X.3 profile parameter index |
| 1.3.6.1.4.1.529.23.3.1.1.36 | answerProfile-X25Answer-MaxCalls, answerProfile__x25_answer__max_calls | 0 | 0 | Max number of unsuccessful calls |
| 1.3.6.1.4.1.529.23.3.1.1.37 | answerProfile-X25Answer-VcTimerEnable, answerProfile__x25_answer__vc_timer_enable | 0 | 0 | PAD VCE enable flag |
| 1.3.6.1.4.1.529.23.3.1.1.38 | answerProfile-X25Answer-AutoCallX121Address, answerProfile__x25_answer__auto_call_x121_address | 0 | 0 | X.121 address to auto-call upon session startup. |
| 1.3.6.1.4.1.529.23.3.1.1.39 | answerProfile-X25Answer-ReverseCharge, answerProfile__x25_answer__reverse_charge | 0 | 0 | Reverse charge request |
| 1.3.6.1.4.1.529.23.3.1.1.40 | answerProfile-X25Answer-X3CustomProf, answerProfile__x25_answer__x3_custom_prof | 0 | 0 | Custom profile enter a string for a custom X.3 profile if x3Prof says custom. |
| 1.3.6.1.4.1.529.23.3.1.1.41 | answerProfile__comb_answer__enabled | 0 | 0 | If enabled, incoming calls that match a local profile with a call management type of comb will be accepted. |
| 1.3.6.1.4.1.529.23.3.1.1.42 | answerProfile__comb_answer__password_required | 0 | 0 | If enabled, the far end must supply a password when initiating a call. |
| 1.3.6.1.4.1.529.23.3.1.1.43 | answerProfile__comb_answer__interval | 0 | 0 | The combinet link integrety interval. |
| 1.3.6.1.4.1.529.23.3.1.1.44 | answerProfile__comb_answer__compression | 0 | 0 | Should compression be used. |
| 1.3.6.1.4.1.529.23.3.1.1.45 | answerProfile-EuAnswer-EurawEnabled, answerProfile__eu_answer__euraw_enabled | 0 | 0 | Enable/disable the EUNET raw protocol. |
| 1.3.6.1.4.1.529.23.3.1.1.46 | answerProfile-EuAnswer-EuuiEnabled, answerProfile__eu_answer__euui_enabled | 0 | 0 | Enable/disable the EUNET UI protocol. |
| 1.3.6.1.4.1.529.23.3.1.1.47 | answerProfile-EuAnswer-DceAddr, answerProfile__eu_answer__dce_addr | 0 | 0 | The address of the DCE side of the link when the EUNET UI protocol is used. |
| 1.3.6.1.4.1.529.23.3.1.1.48 | answerProfile-EuAnswer-DteAddr, answerProfile__eu_answer__dte_addr | 0 | 0 | The address of the DTE side of the link when the EUNET UI protocol is used. |
| 1.3.6.1.4.1.529.23.3.1.1.49 | answerProfile-EuAnswer-Mru, answerProfile__eu_answer__mru | 0 | 0 | The Maximum Receive Unit, i.e. the largest frame we will accept when the EUNET UI protocol is used. |
| 1.3.6.1.4.1.529.23.3.1.1.50 | answerProfile-IpAnswer-Enabled, answerProfile__ip_answer__enabled | 0 | 0 | Set to yes to enable IP routing on incoming calls using encapsulation protocols that support IP routing. |
| 1.3.6.1.4.1.529.23.3.1.1.51 | answerProfile-IpAnswer-VjHeaderPrediction, answerProfile__ip_answer__vj_header_prediction | 0 | 0 | Set to yes to enable Van Jacobson IP header prediction to be negotiated on incoming calls using encapsulation protocols that su… |
| 1.3.6.1.4.1.529.23.3.1.1.52 | answerProfile-IpAnswer-AssignAddress, answerProfile__ip_answer__assign_address | 0 | 0 | Set to yes if this unit is configured with one or more pools of IP addresses that will be used as a source of addresses to assi… |
| 1.3.6.1.4.1.529.23.3.1.1.53 | answerProfile-IpAnswer-RoutingMetric, answerProfile__ip_answer__routing_metric | 0 | 0 | The default metric assigned to routes created for incoming calls. |
| 1.3.6.1.4.1.529.23.3.1.1.54 | answerProfile-IpxAnswer-Enabled, answerProfile__ipx_answer__enabled | 0 | 0 | Set to Yes to enable incoming IPX calls. |
| 1.3.6.1.4.1.529.23.3.1.1.55 | answerProfile-IpxAnswer-PeerMode, answerProfile__ipx_answer__peer_mode | 0 | 0 | Enable/disable full routing between peer or use the pool to assign a network number. |
| 1.3.6.1.4.1.529.23.3.1.1.56 | answerProfile-SessionInfo-CallFilter, answerProfile__session_info__call_filter | 0 | 0 | The name of the filter used to determine if a packet should cause the idle timer to be reset or, when the answer profile is use… |
| 1.3.6.1.4.1.529.23.3.1.1.57 | answerProfile-SessionInfo-DataFilter, answerProfile__session_info__data_filter | 0 | 0 | The name of the filter used to determine if packets should be forwarded or dropped. |
| 1.3.6.1.4.1.529.23.3.1.1.58 | answerProfile-SessionInfo-FilterPersistence, answerProfile__session_info__filter_persistence | 0 | 0 | Determines if filters should persist between calls. |
| 1.3.6.1.4.1.529.23.3.1.1.59 | answerProfile-SessionInfo-IdleTimer, answerProfile__session_info__idle_timer | 0 | 0 | The number of seconds of no activity before a call will be dropped. The value 0 disables the idle timer. |
| 1.3.6.1.4.1.529.23.3.1.1.60 | answerProfile-SessionInfo-TsIdleMode, answerProfile__session_info__ts_idle_mode | 0 | 0 | The method used to determine when the terminal server idle session timer is reset. |
| 1.3.6.1.4.1.529.23.3.1.1.61 | answerProfile-SessionInfo-TsIdleTimer, answerProfile__session_info__ts_idle_timer | 0 | 0 | The number of seconds of no activity as defined by the idle mode before a session will be terminated. |
| 1.3.6.1.4.1.529.23.3.1.1.62 | answerProfile-SessionInfo-MaxCallDuration, answerProfile__session_info__max_call_duration | 0 | 0 | The number of minutes of connect time before a call will be dropped. The value 0 disables the connection timer. |
| 1.3.6.1.4.1.529.23.3.1.1.63 | answerProfile-X75Answer-Enabled, answerProfile__x75_answer__enabled | 0 | 0 | Set to yes to enable incoming X75 calls. |
| 1.3.6.1.4.1.529.23.3.1.1.64 | answerProfile-X75Answer-KFramesOutstanding, answerProfile__x75_answer__k_frames_outstanding | 0 | 0 | Number of frames outstanding before we require an ack. Defaults to 7. |
| 1.3.6.1.4.1.529.23.3.1.1.65 | answerProfile-X75Answer-N2Retransmissions, answerProfile__x75_answer__n2_retransmissions | 0 | 0 | Number of retransmissions allowed. Defaults to 10. |
| 1.3.6.1.4.1.529.23.3.1.1.66 | answerProfile-X75Answer-T1RetranTimer, answerProfile__x75_answer__t1_retran_timer | 0 | 0 | Number of milliseconds between retransmissions. Defaults to 1000. |
| 1.3.6.1.4.1.529.23.3.1.1.67 | answerProfile-X75Answer-FrameLength, answerProfile__x75_answer__frame_length | 0 | 0 | Frame length to use for incoming X.75 connections. Defaults to 1024. |
| 1.3.6.1.4.1.529.23.3.1.1.68 | answerProfile-FramedOnly, answerProfile__framed_only | 0 | 0 | A profile can be restricted to only doing the framed commands (ppp, mpp, slip, and quit) by setting this to YES |
| 1.3.6.1.4.1.529.23.3.1.1.69 | answerProfile-Action-o, answerProfile__action__ | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.3.1.1.70 | answerProfile-PppAnswer-CbcpEnabled, answerProfile__ppp_answer__cbcp_enabled | 0 | 0 | Enable Microsoft Callback Control Protocol Negotiation. |
| 1.3.6.1.4.1.529.23.3.1.1.71 | answerProfile-HdlcNrmAnswer-Enabled, answerProfile__hdlc_nrm_answer__enabled | 0 | 0 | Set to yes to enable incoming HDLC-NRM calls. |
| 1.3.6.1.4.1.529.23.3.1.1.72 | answerProfile-Visa2Answer-Enabled, answerProfile__visa2_answer__enabled | 0 | 0 | Set to yes to enable incoming VISA2 calls. |
| 1.3.6.1.4.1.529.23.3.1.1.74 | answerProfile-PppAnswer-IpxHeaderCompression, answerProfile__ppp_answer__ipx_header_compression | 0 | 0 | Use IPX header compression if encapsulation supports it. |
| 1.3.6.1.4.1.529.23.3.1.1.75 | answerProfile-PppAnswer-Mtu, answerProfile__ppp_answer__mtu | 0 | 0 | The Maximum Transmit Unit, i.e. the largest frame we will send out. |
| 1.3.6.1.4.1.529.23.3.1.1.76 | answerProfile-IpAnswer-PrivateRouteProfileRequired, answerProfile__ip_answer__private_route_profile_required | 0 | 0 | Parameter to decide default action,if private route table not found. If set to yes, the call will be cleared if the private rou… |
| 1.3.6.1.4.1.529.23.3.1.1.77 | answerProfile-SessionInfo-FilterRequired, answerProfile__session_info__filter_required | 0 | 0 | If No, the call will be allowed to come up even if the specified filter was not found either locally, in the cache or in RADIUS… |
| 1.3.6.1.4.1.529.23.3.1.1.78 | answerProfile-AtmAnswer-SvcEnabled, answerProfile__atm_answer__svc_enabled | 0 | 0 | Set to yes to enable ATM SVC athentication on incoming calls. |
| 1.3.6.1.4.1.529.23.3.1.1.79 | answerProfile-PppAnswer-BiDirectionalAuth, answerProfile__ppp_answer__bi_directional_auth | 0 | 0 | This parameter enables the authentication to be done in both directions. It can be used only with the CHAP, MS-CHAP or CACHE-TO… |
| 1.3.6.1.4.1.529.23.3.1.1.80 | answerProfile-PppAnswer-SubstituteSendName, answerProfile__ppp_answer__substitute_send_name | 0 | 0 | Name send to the far end, if different from the global system name. |
| 1.3.6.1.4.1.529.23.3.1.1.81 | answerProfile-PppAnswer-AuthForAsyncFramedUsers, answerProfile__ppp_answer__auth_for_async_framed_users | 0 | 0 | Determines whether we need to authenticate async framed users. |
| 1.3.6.1.4.1.529.23.3.1.1.82 | answerProfile-PppAnswer-MaxPapAuthRetry, answerProfile__ppp_answer__max_pap_auth_retry | 0 | 0 | Number of retries allowed, if PAP authentication fails. |
| 1.3.6.1.4.1.529.23.3.1.1.83 | answerProfile-IpAnswer-PoolForAsyncFramedUser, answerProfile__ip_answer__pool_for_async_framed_user | 0 | 0 | Pool number to be used for dial-in asynchronous PPP framed users with out authentication. |
| 1.3.6.1.4.1.529.23.3.1.1.85 | answerProfile-CallbackClidPrefix | 0 | 0 | Prefix to prepend to the dial number when callback is performed with the CLID number. |
| 1.3.6.1.4.1.529.23.3.1.1.87 | answerProfile-PriorityAnswer-PacketClassification | 0 | 0 | Method used to classify PPP packets. |
| 1.3.6.1.4.1.529.23.3.1.1.88 | answerProfile-PriorityAnswer-MaxRtpPacketDelay | 0 | 0 | Maximum delay for RTP packets in milli-seconds. Used for calculating the fragment size for the non-rtp traffic using the same l… |
| 1.3.6.1.4.1.529.23.3.1.1.89 | answerProfile-PriorityAnswer-MinimumRtpPort | 0 | 0 | Minimum UDP port for prioritization |
| 1.3.6.1.4.1.529.23.3.1.1.90 | answerProfile-PriorityAnswer-MaximumRtpPort | 0 | 0 | Maximum UDP port for prioritization |
| 1.3.6.1.4.1.529.23.3.1.1.91 | answerProfile-PriorityAnswer-NoHighPrioPktDuration | 0 | 0 | The number of seconds of no high priority packets before disabling IP fragmentation of low priority packets. The value 0 disabl… |
| 1.3.6.1.4.1.529.23.3.1.1.92 | answerProfile-PppAnswer-MaxPppConfigureRetry | 0 | 0 | Number of retries allowed, if LCP/NCP fails |
| 1.3.6.1.4.1.529.23.3.1.1.93 | answerProfile-PppAnswer-PppRestartTimer | 0 | 0 | Initial LCP/NCP restart timer |
| 1.3.6.1.4.1.529.23.3.1.1.94 | answerProfile-PppAnswer-MaxPppRestartTimer | 0 | 0 | Maximum LCP/NCP restart timer |
| 1.3.6.1.4.1.529.23.3.1.1.95 | answerProfile-PriorityAnswer-Enabled | 0 | 0 | Enable priority classification. |