A mibatmIntfConfProfile entry containing objects that
maps to the parameters of mibatmIntfConfProfile profile.
Parsed from file ASCEND-MIBATMPORT-MIB.mib
Module: ASCEND-MIBATMPORT-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBATMPORT-MIB
[Automatically extracted from oidview.com]
mibatmIntfConfProfileEntry OBJECT-TYPE SYNTAX MibatmIntfConfProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A mibatmIntfConfProfile entry containing objects that maps to the parameters of mibatmIntfConfProfile profile." INDEX { atmIntfConfProfile-Shelf-o, atmIntfConfProfile-Slot-o, atmIntfConfProfile-Item-o, atmIntfConfProfile-LogicalItem-o } ::= { mibatmIntfConfProfileTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.529.23.51.1.1.1 | atmIntfConfProfile-Shelf-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.51.1.1.2 | atmIntfConfProfile-Slot-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.51.1.1.3 | atmIntfConfProfile-Item-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.51.1.1.4 | atmIntfConfProfile-LogicalItem-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.51.1.1.5 | atmIntfConfProfile-Address-PhysicalAddress-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.51.1.1.6 | atmIntfConfProfile-Address-PhysicalAddress-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
1.3.6.1.4.1.529.23.51.1.1.7 | atmIntfConfProfile-Address-PhysicalAddress-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
1.3.6.1.4.1.529.23.51.1.1.8 | atmIntfConfProfile-Address-LogicalItem | 0 | 0 | A number that specifies an addressable logical entity within the context of a physical address. |
1.3.6.1.4.1.529.23.51.1.1.9 | atmIntfConfProfile-BaseConfig-MaxVpcs | 0 | 0 | The maximum number of VPCs (PVPCs/SVPCs) supported at this ATM interface. |
1.3.6.1.4.1.529.23.51.1.1.10 | atmIntfConfProfile-BaseConfig-MaxVccs | 0 | 0 | The maximum number of VCCs (PVCCs/SVCCs) supported at this ATM interface. |
1.3.6.1.4.1.529.23.51.1.1.11 | atmIntfConfProfile-BaseConfig-MaxActiveVpiBits | 0 | 0 | The maximum number of active VPI bits configured for use at this ATM interface. |
1.3.6.1.4.1.529.23.51.1.1.12 | atmIntfConfProfile-BaseConfig-MaxActiveVciBits | 0 | 0 | The maximum number of active VCI bits configured for use at this ATM interface. |
1.3.6.1.4.1.529.23.51.1.1.13 | atmIntfConfProfile-BaseConfig-IlmiVpi | 0 | 0 | The VPI value of the ILMI VCC at this ATM interface. If ilmi-vpi and ilmi-vci are both zero ILMI is not supported at this inter… |
1.3.6.1.4.1.529.23.51.1.1.14 | atmIntfConfProfile-BaseConfig-IlmiVci | 0 | 0 | The VCI value of the ILMI VCC at this ATM interface. If ilmi-vpi and ilmi-vci are both zero ILMI is not supported at this inter… |
1.3.6.1.4.1.529.23.51.1.1.15 | atmIntfConfProfile-BaseConfig-NeighborIpAddress | 0 | 0 | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can sen… |
1.3.6.1.4.1.529.23.51.1.1.16 | atmIntfConfProfile-BaseConfig-NeighborName | 0 | 0 | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects… |
1.3.6.1.4.1.529.23.51.1.1.17 | atmIntfConfProfile-BaseConfig-SubscAtmAddress | 0 | 0 | The identifier assigned by a service provider to the network side of public network UNI. If this interface has no assigned serv… |
1.3.6.1.4.1.529.23.51.1.1.18 | atmIntfConfProfile-ExtensionConfig-ConfigType | 0 | 0 | The type of connection setup procedures configured for the ATM interface. Setting this variable to a value of 'other' is not al… |
1.3.6.1.4.1.529.23.51.1.1.19 | atmIntfConfProfile-ExtensionConfig-ConfigSide | 0 | 0 | The configured role of the managed entity as one side of the ATM interface. This value does not apply when the object atmIntfCo… |
1.3.6.1.4.1.529.23.51.1.1.20 | atmIntfConfProfile-ExtensionConfig-IlmiAdminStatus | 0 | 0 | Following ILMI components will be enabled on this port only if ilmi-admin-status is set to YES - ilmiAddressRegistration, - ilm… |
1.3.6.1.4.1.529.23.51.1.1.21 | atmIntfConfProfile-ExtensionConfig-ConnEstabInterval | 0 | 0 | The amount of time S (in seconds ) between successive transmissions of ILMI messages on this interface for the purpose of detec… |
1.3.6.1.4.1.529.23.51.1.1.22 | atmIntfConfProfile-ExtensionConfig-LossDetectInterval | 0 | 0 | The amount of time T ( in seconds ) between successive transmissions of ILMI messages on this interface for the purpose of dete… |
1.3.6.1.4.1.529.23.51.1.1.23 | atmIntfConfProfile-ExtensionConfig-PollInactFactor | 0 | 0 | The number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is … |
1.3.6.1.4.1.529.23.51.1.1.24 | atmIntfConfProfile-ExtensionConfig-DeviceType | 0 | 0 | Specifies whether this end of the interface is advertised in ILMI as a device of the `public' or `private' type. |
1.3.6.1.4.1.529.23.51.1.1.25 | atmIntfConfProfile-ExtensionConfig-MaxSwitchedVpcVpi | 0 | 0 | The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path… |
1.3.6.1.4.1.529.23.51.1.1.26 | atmIntfConfProfile-ExtensionConfig-MaxSwitchedVccVpi | 0 | 0 | The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual chan… |
1.3.6.1.4.1.529.23.51.1.1.27 | atmIntfConfProfile-ExtensionConfig-MinSwitchedVccVci | 0 | 0 | The minimum VCI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual chan… |
1.3.6.1.4.1.529.23.51.1.1.28 | atmIntfConfProfile-ExtensionConfig-SigVccRxQosName | 0 | 0 | The signalling VCC QOS parameters for the receive direction. |
1.3.6.1.4.1.529.23.51.1.1.29 | atmIntfConfProfile-ExtensionConfig-SigVccTxQosName | 0 | 0 | The signalling VCC QOS parameters for the transmit direction. |
1.3.6.1.4.1.529.23.51.1.1.30 | atmIntfConfProfile-ExtensionConfig-PvcFailureTrapEnabled | 0 | 0 | Allows the generation of traps in response to PVCL or PVPL failures on this interface. Default = FALSE |
1.3.6.1.4.1.529.23.51.1.1.31 | atmIntfConfProfile-ExtensionConfig-PvcFailureIntvl | 0 | 0 | The minimum interval between the sending of atmIntfPvcFailuresTrap notifications for this interface, Default = 30 seconds. |
1.3.6.1.4.1.529.23.51.1.1.32 | atmIntfConfProfile-Action-o | 0 | 0 | None |
1.3.6.1.4.1.529.23.51.1.1.33 | atmIntfConfProfile-ExtensionConfig-IlmiConnectivity | 0 | 0 | ILMI Connectivity enabled on this port if set to YES |