The identifier assigned by a service provider to the network side of public network UNI. If this interface has no assigned service provider address, then atmInterfaceSubscrAddress is an octet string of zero length.
Parsed from file ASCEND-MIBATMPORT-MIB.mib
Module: ASCEND-MIBATMPORT-MIB
Vendor: Ascend Communications Inc.
Module: ASCEND-MIBATMPORT-MIB
[Automatically extracted from oidview.com]
atmIntfConfProfile-BaseConfig-SubscAtmAddress OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "The identifier assigned by a service provider to the network side of public network UNI. If this interface has no assigned service provider address, then atmInterfaceSubscrAddress is an octet string of zero length." ::= { mibatmIntfConfProfileEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.529.23.51.1.1.1 | atmIntfConfProfile-Shelf-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.51.1.1.2 | atmIntfConfProfile-Slot-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.51.1.1.3 | atmIntfConfProfile-Item-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.51.1.1.4 | atmIntfConfProfile-LogicalItem-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.51.1.1.5 | atmIntfConfProfile-Address-PhysicalAddress-Shelf | 0 | 0 | The number of the shelf that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.51.1.1.6 | atmIntfConfProfile-Address-PhysicalAddress-Slot | 0 | 0 | The number of the slot that the addressed physical device resides on. |
| 1.3.6.1.4.1.529.23.51.1.1.7 | atmIntfConfProfile-Address-PhysicalAddress-ItemNumber | 0 | 0 | A number that specifies an addressable entity within the context of shelf and slot. |
| 1.3.6.1.4.1.529.23.51.1.1.8 | atmIntfConfProfile-Address-LogicalItem | 0 | 0 | A number that specifies an addressable logical entity within the context of a physical address. |
| 1.3.6.1.4.1.529.23.51.1.1.9 | atmIntfConfProfile-BaseConfig-MaxVpcs | 0 | 0 | The maximum number of VPCs (PVPCs/SVPCs) supported at this ATM interface. |
| 1.3.6.1.4.1.529.23.51.1.1.10 | atmIntfConfProfile-BaseConfig-MaxVccs | 0 | 0 | The maximum number of VCCs (PVCCs/SVCCs) supported at this ATM interface. |
| 1.3.6.1.4.1.529.23.51.1.1.11 | atmIntfConfProfile-BaseConfig-MaxActiveVpiBits | 0 | 0 | The maximum number of active VPI bits configured for use at this ATM interface. |
| 1.3.6.1.4.1.529.23.51.1.1.12 | atmIntfConfProfile-BaseConfig-MaxActiveVciBits | 0 | 0 | The maximum number of active VCI bits configured for use at this ATM interface. |
| 1.3.6.1.4.1.529.23.51.1.1.13 | atmIntfConfProfile-BaseConfig-IlmiVpi | 0 | 0 | The VPI value of the ILMI VCC at this ATM interface. If ilmi-vpi and ilmi-vci are both zero ILMI is not supported at this inter… |
| 1.3.6.1.4.1.529.23.51.1.1.14 | atmIntfConfProfile-BaseConfig-IlmiVci | 0 | 0 | The VCI value of the ILMI VCC at this ATM interface. If ilmi-vpi and ilmi-vci are both zero ILMI is not supported at this inter… |
| 1.3.6.1.4.1.529.23.51.1.1.15 | atmIntfConfProfile-BaseConfig-NeighborIpAddress | 0 | 0 | The IP address of the neighbor system connected to the far end of this interface, to which a Network Management Station can sen… |
| 1.3.6.1.4.1.529.23.51.1.1.16 | atmIntfConfProfile-BaseConfig-NeighborName | 0 | 0 | The textual name of the interface on the neighbor system on the far end of this interface, and to which this interface connects… |
| 1.3.6.1.4.1.529.23.51.1.1.18 | atmIntfConfProfile-ExtensionConfig-ConfigType | 0 | 0 | The type of connection setup procedures configured for the ATM interface. Setting this variable to a value of 'other' is not al… |
| 1.3.6.1.4.1.529.23.51.1.1.19 | atmIntfConfProfile-ExtensionConfig-ConfigSide | 0 | 0 | The configured role of the managed entity as one side of the ATM interface. This value does not apply when the object atmIntfCo… |
| 1.3.6.1.4.1.529.23.51.1.1.20 | atmIntfConfProfile-ExtensionConfig-IlmiAdminStatus | 0 | 0 | Following ILMI components will be enabled on this port only if ilmi-admin-status is set to YES - ilmiAddressRegistration, - ilm… |
| 1.3.6.1.4.1.529.23.51.1.1.21 | atmIntfConfProfile-ExtensionConfig-ConnEstabInterval | 0 | 0 | The amount of time S (in seconds ) between successive transmissions of ILMI messages on this interface for the purpose of detec… |
| 1.3.6.1.4.1.529.23.51.1.1.22 | atmIntfConfProfile-ExtensionConfig-LossDetectInterval | 0 | 0 | The amount of time T ( in seconds ) between successive transmissions of ILMI messages on this interface for the purpose of dete… |
| 1.3.6.1.4.1.529.23.51.1.1.23 | atmIntfConfProfile-ExtensionConfig-PollInactFactor | 0 | 0 | The number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is … |
| 1.3.6.1.4.1.529.23.51.1.1.24 | atmIntfConfProfile-ExtensionConfig-DeviceType | 0 | 0 | Specifies whether this end of the interface is advertised in ILMI as a device of the `public' or `private' type. |
| 1.3.6.1.4.1.529.23.51.1.1.25 | atmIntfConfProfile-ExtensionConfig-MaxSwitchedVpcVpi | 0 | 0 | The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual path… |
| 1.3.6.1.4.1.529.23.51.1.1.26 | atmIntfConfProfile-ExtensionConfig-MaxSwitchedVccVpi | 0 | 0 | The maximum VPI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual chan… |
| 1.3.6.1.4.1.529.23.51.1.1.27 | atmIntfConfProfile-ExtensionConfig-MinSwitchedVccVci | 0 | 0 | The minimum VCI that the signalling stack on the ATM interface is configured to support for allocation to switched virtual chan… |
| 1.3.6.1.4.1.529.23.51.1.1.28 | atmIntfConfProfile-ExtensionConfig-SigVccRxQosName | 0 | 0 | The signalling VCC QOS parameters for the receive direction. |
| 1.3.6.1.4.1.529.23.51.1.1.29 | atmIntfConfProfile-ExtensionConfig-SigVccTxQosName | 0 | 0 | The signalling VCC QOS parameters for the transmit direction. |
| 1.3.6.1.4.1.529.23.51.1.1.30 | atmIntfConfProfile-ExtensionConfig-PvcFailureTrapEnabled | 0 | 0 | Allows the generation of traps in response to PVCL or PVPL failures on this interface. Default = FALSE |
| 1.3.6.1.4.1.529.23.51.1.1.31 | atmIntfConfProfile-ExtensionConfig-PvcFailureIntvl | 0 | 0 | The minimum interval between the sending of atmIntfPvcFailuresTrap notifications for this interface, Default = 30 seconds. |
| 1.3.6.1.4.1.529.23.51.1.1.32 | atmIntfConfProfile-Action-o | 0 | 0 | None |
| 1.3.6.1.4.1.529.23.51.1.1.33 | atmIntfConfProfile-ExtensionConfig-IlmiConnectivity | 0 | 0 | ILMI Connectivity enabled on this port if set to YES |