The maximum number of external link-state entries that can be stored in
the link-state database. If the value is -1, then there is no limit,
that is the maximum number of external OSPF routes that this
autonomous system border router will originate.
It will begin to flush LSA(Link State Advertisement)s, if an ASBR
might receive bursts of external routes (for example, a regional
network), then the parameter should be configured to a reasonable level.
If there are less than two thousand routes and large bursts are unlikely,
then the default should be adequate. This parameter will not affect the
number of external OSPF routes a router will store in it's database.
Parsed from file nortelPP-ipV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-IpMIB
The maximum number of external link-state entries that can be stored in
the link-state database. If the value is -1, then there is no limit,
that is the maximum number of external OSPF routes that this
autonomous system border router will originate.
It will begin to flush LSA(Link State Advertisement)s, if an ASBR
might receive bursts of external routes (for example, a regional
network), then the parameter should be configured to a reasonable level.
If there are less than two thousand routes and large bursts are unlikely,
then the default should be adequate. This parameter will not affect the
number of external OSPF routes a router will store in it's database.
Parsed from file Nortel-Magellan-Passport-IpMIB.mib
Module: Nortel-Magellan-Passport-IpMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-IpMIB
[Automatically extracted from oidview.com]
vrIpOspfExtLsdbLimit OBJECT-TYPE SYNTAX INTEGER (-1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of external link-state entries that can be stored in the link-state database. If the value is -1, then there is no limit, that is the maximum number of external OSPF routes that this autonomous system border router will originate. It will begin to flush LSA(Link State Advertisement)s, if an ASBR might receive bursts of external routes (for example, a regional network), then the parameter should be configured to a reasonable level. If there are less than two thousand routes and large bursts are unlikely, then the default should be adequate. This parameter will not affect the number of external OSPF routes a router will store in it's database." DEFVAL { -1 } ::= { vrIpOspfProvEntry 5 }
vrIpOspfExtLsdbLimit OBJECT-TYPE SYNTAX INTEGER (-1..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum number of external link-state entries that can be stored in the link-state database. If the value is -1, then there is no limit, that is the maximum number of external OSPF routes that this autonomous system border router will originate. It will begin to flush LSA(Link State Advertisement)s, if an ASBR might receive bursts of external routes (for example, a regional network), then the parameter should be configured to a reasonable level. If there are less than two thousand routes and large bursts are unlikely, then the default should be adequate. This parameter will not affect the number of external OSPF routes a router will store in it's database." DEFVAL { -1 } ::= { vrIpOspfProvEntry 5 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.1 | vrIpOspfRouterId | 0 | 0 | This attribute is an Ip Address that uniquely identifies the router in the autonomous system. |
1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.2 | vrIpOspfSnmpAdminStatus | 0 | 0 | The administrative status of the OSPF Component in this Virtual Router. |
1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.3 | vrIpOspfAsBdrRtrStatus | 0 | 0 | This attribute is a flag to note whether this router is an autonomous system border router. If this router is configured to expo… |
1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.4 | vrIpOspfTosSupport | 0 | 0 | vrIpOspftosSupport |
1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.6 | vrIpOspfMulticastForward | 0 | 0 | A bit mask indicating the limits on Network Layer Multicast(class D) forwarding. It is represented as a sum of the following: if … |
1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.7 | vrIpOspfMigrateRip | 0 | 0 | This Attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. This Parameter should only be use… |
1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.8 | vrIpOspfGenerateDefaultRouteMetric | 0 | 0 | If this router is configured as an autonomous system border router, then this attribute causes the default route to be generated… |