This Attribute sets the preference level of OSPF-internal routes to be
less preferred than RIP.
This Parameter should only be used when starting migration of network
from RIP to OSPF. When ready to cutover to OSPF, set this attribute
disabled and run under normal preferences. All OSPF routers in the
Autonomous System should be running with migraterip enabled or with
migraterip disabled to prevent routing loops. It is important that the
changeover period from RIP to OSPF be performed quickly on all OSPF
routers so that no routing loops are formed. These routing loops could
be caused by conflicts in the internal RIP and OSPF databases.
Parsed from file nortelPP-ipV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-IpMIB
This Attribute sets the preference level of OSPF-internal routes to be
less preferred than RIP.
This Parameter should only be used when starting migration of network
from RIP to OSPF. When ready to cutover to OSPF, set this attribute
disabled and run under normal preferences. All OSPF routers in the
Autonomous System should be running with migraterip enabled or with
migraterip disabled to prevent routing loops. It is important that the
changeover period from RIP to OSPF be performed quickly on all OSPF
routers so that no routing loops are formed. These routing loops could
be caused by conflicts in the internal RIP and OSPF databases.
Parsed from file Nortel-Magellan-Passport-IpMIB.mib
Module: Nortel-Magellan-Passport-IpMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-IpMIB
[Automatically extracted from oidview.com]
vrIpOspfMigrateRip OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This Attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. This Parameter should only be used when starting migration of network from RIP to OSPF. When ready to cutover to OSPF, set this attribute disabled and run under normal preferences. All OSPF routers in the Autonomous System should be running with migraterip enabled or with migraterip disabled to prevent routing loops. It is important that the changeover period from RIP to OSPF be performed quickly on all OSPF routers so that no routing loops are formed. These routing loops could be caused by conflicts in the internal RIP and OSPF databases." DEFVAL { disabled } ::= { vrIpOspfProvEntry 7 }
vrIpOspfMigrateRip OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This Attribute sets the preference level of OSPF-internal routes to be less preferred than RIP. This Parameter should only be used when starting migration of network from RIP to OSPF. When ready to cutover to OSPF, set this attribute disabled and run under normal preferences. All OSPF routers in the Autonomous System should be running with migraterip enabled or with migraterip disabled to prevent routing loops. It is important that the changeover period from RIP to OSPF be performed quickly on all OSPF routers so that no routing loops are formed. These routing loops could be caused by conflicts in the internal RIP and OSPF databases." DEFVAL { disabled } ::= { vrIpOspfProvEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.1 | vrIpOspfRouterId | 0 | 0 | This attribute is an Ip Address that uniquely identifies the router in the autonomous system. |
| 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.2 | vrIpOspfSnmpAdminStatus | 0 | 0 | The administrative status of the OSPF Component in this Virtual Router. |
| 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.3 | vrIpOspfAsBdrRtrStatus | 0 | 0 | This attribute is a flag to note whether this router is an autonomous system border router. If this router is configured to expo… |
| 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.4 | vrIpOspfTosSupport | 0 | 0 | vrIpOspftosSupport |
| 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.5 | vrIpOspfExtLsdbLimit | 0 | 0 | The maximum number of external link-state entries that can be stored in the link-state database. If the value is -1, then there … |
| 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.6 | vrIpOspfMulticastForward | 0 | 0 | A bit mask indicating the limits on Network Layer Multicast(class D) forwarding. It is represented as a sum of the following: if … |
| 1.3.6.1.4.1.562.2.4.1.100.6.7.100.1.8 | vrIpOspfGenerateDefaultRouteMetric | 0 | 0 | If this router is configured as an autonomous system border router, then this attribute causes the default route to be generated… |