This attribute indicates whether a Payload AIS alarm state is
entered. A Payload AIS alarm state is entered when a Payload AIS
defect persists for a period of 2.5 seconds +/- 0.5 seconds. A
Payload AIS defect is declared when the incoming signal of the
6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a
sequence of 3,072 bits (0.5 ms). If the payload AIS defects are
intermittently occurring, the payload AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
A Payload AIS failure alarm is cleared when the Payload AIS
defect is absent for a period of 10 seconds +/- 0.5 seconds. The port
goes into an operationalState of disabled until the AIS alarm
condition is cleared. While the port is in the Payload AIS alarm
state, the node also transmits the far-end RAI defect indicator on the
out-going JT2 line.
Parsed from file nortelPP-logicalProcessorV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
This attribute indicates whether a Payload AIS alarm state is
entered. A Payload AIS alarm state is entered when a Payload AIS
defect persists for a period of 2.5 seconds +/- 0.5 seconds. A
Payload AIS defect is declared when the incoming signal of the
6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a
sequence of 3,072 bits (0.5 ms). If the payload AIS defects are
intermittently occurring, the payload AIS defect accumulator is
decremented at a rate of 1/10 of the incrementing rate (alarm
integration ratio of 1/10), with all measurements based on a 200 ms
polling cycle.
A Payload AIS failure alarm is cleared when the Payload AIS
defect is absent for a period of 10 seconds +/- 0.5 seconds. The port
goes into an operationalState of disabled until the AIS alarm
condition is cleared. While the port is in the Payload AIS alarm
state, the node also transmits the far-end RAI defect indicator on the
out-going JT2 line.
Parsed from file Nortel-Magellan-Passport-LogicalProcessorMIB.mib
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
lpJT2RxAisPayloadAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line." DEFVAL { off } ::= { lpJT2OperEntry 4 }
lpJT2RxAisPayloadAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS defect persists for a period of 2.5 seconds +/- 0.5 seconds. A Payload AIS defect is declared when the incoming signal of the 6312 kbit/s frame payload (TS1 - TS96) has two or less zeros in a sequence of 3,072 bits (0.5 ms). If the payload AIS defects are intermittently occurring, the payload AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Payload AIS failure alarm is cleared when the Payload AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Payload AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line." DEFVAL { off } ::= { lpJT2OperEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.1 | lpJT2LosAlarm | 0 | 0 | This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects ha… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.2 | lpJT2LofAlarm | 0 | 0 | This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.3 | lpJT2RxAisPhysicalAlarm | 0 | 0 | This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AI… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.5 | lpJT2RxRaiAlarm | 0 | 0 | This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signa… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.6 | lpJT2TxAisPhysicalAlarm | 0 | 0 | This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently… |
| 1.3.6.1.4.1.562.2.4.1.12.16.15.1.7 | lpJT2TxRaiAlarm | 0 | 0 | This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern… |