This attribute indicates whether outband flow control conversions
are being performed. If outband flow control is on, then when the
Modem Application Layer (MAL) receives an xon or xoff from the
PSTN, the MAL converts the instruction into a primitive and sends
it to the Data Service Control (DSC). In the opposite direction with
outband flow control on, when the MAL receives a primitive from
the DSC, the MAL converts the primitive into an xon or xoff and
forwards it to the PSTN. If outband flow control is off, then all flow
control is handled inband. The modem performs either inband or
outband flow control unless V.42 layer is active, it is a fax call, or
no flow control was specified by the DMS-MTX. This attribute has
one of the following values:
on: Conversion to and from out-of-band signaling is enabled.
off: Conversion to and from out-of-band signaling is disabled.
Parsed from file nortelPP-tdmaIwfV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-TdmaIwfMIB
This attribute indicates whether outband flow control conversions
are being performed. If outband flow control is on, then when the
Modem Application Layer (MAL) receives an xon or xoff from the
PSTN, the MAL converts the instruction into a primitive and sends
it to the Data Service Control (DSC). In the opposite direction with
outband flow control on, when the MAL receives a primitive from
the DSC, the MAL converts the primitive into an xon or xoff and
forwards it to the PSTN. If outband flow control is off, then all flow
control is handled inband. The modem performs either inband or
outband flow control unless V.42 layer is active, it is a fax call, or
no flow control was specified by the DMS-MTX. This attribute has
one of the following values:
on: Conversion to and from out-of-band signaling is enabled.
off: Conversion to and from out-of-band signaling is disabled.
Parsed from file Nortel-Magellan-Passport-TdmaIwfMIB.mib
Module: Nortel-Magellan-Passport-TdmaIwfMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-TdmaIwfMIB
[Automatically extracted from oidview.com]
tdmaBcModemOutbandFlowControl OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether outband flow control conversions are being performed. If outband flow control is on, then when the Modem Application Layer (MAL) receives an xon or xoff from the PSTN, the MAL converts the instruction into a primitive and sends it to the Data Service Control (DSC). In the opposite direction with outband flow control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into an xon or xoff and forwards it to the PSTN. If outband flow control is off, then all flow control is handled inband. The modem performs either inband or outband flow control unless V.42 layer is active, it is a fax call, or no flow control was specified by the DMS-MTX. This attribute has one of the following values: on: Conversion to and from out-of-band signaling is enabled. off: Conversion to and from out-of-band signaling is disabled." ::= { tdmaBcModemOperEntry 8 }
tdmaBcModemOutbandFlowControl OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether outband flow control conversions are being performed. If outband flow control is on, then when the Modem Application Layer (MAL) receives an xon or xoff from the PSTN, the MAL converts the instruction into a primitive and sends it to the Data Service Control (DSC). In the opposite direction with outband flow control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into an xon or xoff and forwards it to the PSTN. If outband flow control is off, then all flow control is handled inband. The modem performs either inband or outband flow control unless V.42 layer is active, it is a fax call, or no flow control was specified by the DMS-MTX. This attribute has one of the following values: on: Conversion to and from out-of-band signaling is enabled. off: Conversion to and from out-of-band signaling is disabled." ::= { tdmaBcModemOperEntry 8 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.136.3.10.1.1 | tdmaBcModemVoiceLaw | 0 | 0 | This attribute indicates the active voice law associated with the modem component. This attribute has one of the following value… |
1.3.6.1.4.1.562.2.4.1.136.3.10.1.2 | tdmaBcModemRate | 0 | 0 | This attribute indicates the transmission rate of the current modem in use. All rates are the same in both the transmit and rece… |
1.3.6.1.4.1.562.2.4.1.136.3.10.1.3 | tdmaBcModemModemAlgorithmInUse | 0 | 0 | This attribute indicates the current modem algorithm(s) active for the channel. This attribute has one of the following values: t… |
1.3.6.1.4.1.562.2.4.1.136.3.10.1.4 | tdmaBcModemProtocolState | 0 | 0 | This attribute indicates the active protocol state of the modem in use.This attribute has one of the following values: idle: Mode… |
1.3.6.1.4.1.562.2.4.1.136.3.10.1.5 | tdmaBcModemMobileSideFlowControlState | 0 | 0 | This attribute indicates the state of flow control based on whether flow control was requested by the mobile side of the connect… |
1.3.6.1.4.1.562.2.4.1.136.3.10.1.6 | tdmaBcModemPstnSideFlowControlState | 0 | 0 | This attribute indicates the state of flow control based on whether flow control was requested by the PSTN side of the connectio… |
1.3.6.1.4.1.562.2.4.1.136.3.10.1.7 | tdmaBcModemAsyncMode | 0 | 0 | This attribute indicates whether conversion between synchronous and asynchronous data format (specifically, the stripping or inse… |
1.3.6.1.4.1.562.2.4.1.136.3.10.1.9 | tdmaBcModemOutbandBreak | 0 | 0 | This attribute indicates whether inband or outband break control conversions are being performed. If outband break control is on… |
1.3.6.1.4.1.562.2.4.1.136.3.10.1.10 | tdmaBcModemAutobaud | 0 | 0 | This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the DMS-MTX on the following: (… |