This attribute indicates whether inband or outband break control
conversions are being performed. If outband break control is on,
when the modem detects a break condition coming from the PSTN,
the Modem Application Layer (MAL) converts the instruction into a
primitive and forwards it to the Data Service Control (DSC). In the
opposite direction with outband break control on, when the MAL
receives a primitive from the DSC, the MAL converts the primitive
into a break and forwards it to the PSTN. When a break condition is
discovered all subsequent incoming data is discarded until a start bit
is received.
Parsed from file nortelPP-tdmaIwfV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-TdmaIwfMIB
This attribute indicates whether inband or outband break control
conversions are being performed. If outband break control is on,
when the modem detects a break condition coming from the PSTN,
the Modem Application Layer (MAL) converts the instruction into a
primitive and forwards it to the Data Service Control (DSC). In the
opposite direction with outband break control on, when the MAL
receives a primitive from the DSC, the MAL converts the primitive
into a break and forwards it to the PSTN. When a break condition is
discovered all subsequent incoming data is discarded until a start bit
is received.
Parsed from file Nortel-Magellan-Passport-TdmaIwfMIB.mib
Module: Nortel-Magellan-Passport-TdmaIwfMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-TdmaIwfMIB
[Automatically extracted from oidview.com]
tdmaBcModemOutbandBreak OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether inband or outband break control conversions are being performed. If outband break control is on, when the modem detects a break condition coming from the PSTN, the Modem Application Layer (MAL) converts the instruction into a primitive and forwards it to the Data Service Control (DSC). In the opposite direction with outband break control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into a break and forwards it to the PSTN. When a break condition is discovered all subsequent incoming data is discarded until a start bit is received." ::= { tdmaBcModemOperEntry 9 }
tdmaBcModemOutbandBreak OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether inband or outband break control conversions are being performed. If outband break control is on, when the modem detects a break condition coming from the PSTN, the Modem Application Layer (MAL) converts the instruction into a primitive and forwards it to the Data Service Control (DSC). In the opposite direction with outband break control on, when the MAL receives a primitive from the DSC, the MAL converts the primitive into a break and forwards it to the PSTN. When a break condition is discovered all subsequent incoming data is discarded until a start bit is received." ::= { tdmaBcModemOperEntry 9 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.1 | tdmaBcModemVoiceLaw | 0 | 0 | This attribute indicates the active voice law associated with the modem component. This attribute has one of the following value… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.2 | tdmaBcModemRate | 0 | 0 | This attribute indicates the transmission rate of the current modem in use. All rates are the same in both the transmit and rece… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.3 | tdmaBcModemModemAlgorithmInUse | 0 | 0 | This attribute indicates the current modem algorithm(s) active for the channel. This attribute has one of the following values: t… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.4 | tdmaBcModemProtocolState | 0 | 0 | This attribute indicates the active protocol state of the modem in use.This attribute has one of the following values: idle: Mode… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.5 | tdmaBcModemMobileSideFlowControlState | 0 | 0 | This attribute indicates the state of flow control based on whether flow control was requested by the mobile side of the connect… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.6 | tdmaBcModemPstnSideFlowControlState | 0 | 0 | This attribute indicates the state of flow control based on whether flow control was requested by the PSTN side of the connectio… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.7 | tdmaBcModemAsyncMode | 0 | 0 | This attribute indicates whether conversion between synchronous and asynchronous data format (specifically, the stripping or inse… |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.8 | tdmaBcModemOutbandFlowControl | 0 | 0 | This attribute indicates whether outband flow control conversions are being performed. If outband flow control is on, then when … |
| 1.3.6.1.4.1.562.2.4.1.136.3.10.1.10 | tdmaBcModemAutobaud | 0 | 0 | This attribute indicates whether autobaud is active. The modem is instructed at call setup time by the DMS-MTX on the following: (… |