An entry in the vctDnaCallOptionsTable.
Parsed from file nortelPP-vcTesterV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VcTesterMIB
An entry in the vctDnaCallOptionsTable.
Parsed from file Nortel-Magellan-Passport-VcTesterMIB.mib
Module: Nortel-Magellan-Passport-VcTesterMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VcTesterMIB
[Automatically extracted from oidview.com]
vctDnaCallOptionsEntry OBJECT-TYPE SYNTAX VctDnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vctDnaCallOptionsTable." INDEX { vctIndex, vctDnaIndex } ::= { vctDnaCallOptionsTable 1 }
vctDnaCallOptionsEntry OBJECT-TYPE SYNTAX VctDnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vctDnaCallOptionsTable." INDEX { vctIndex, vctDnaIndex } ::= { vctDnaCallOptionsTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.1 | vctDnaServiceCategory | 0 | 0 | This attribute is assigned for each different type of service within which this Dna is configured. It is placed into the Service… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.2 | vctDnaPacketSizes | 0 | 0 | This attribute indicates the allowable packet sizes supported for call setup using this Dna. ITU-T recommends that packet size 1… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.3 | vctDnaDefaultRecvFrmNetworkPacketSize | 0 | 0 | This attribute indicates the default local receive packet size from network to DTE for all calls using this particular Dna. Attr… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.4 | vctDnaDefaultSendToNetworkPacketSize | 0 | 0 | This attribute indicates the default local send packet size from DTE to network for all calls using this particular Dna. Attribut… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.5 | vctDnaDefaultRecvFrmNetworkThruputClass | 0 | 0 | This attribute indicates the default receive throughput class for all calls using this particular Dna. |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.6 | vctDnaDefaultSendToNetworkThruputClass | 0 | 0 | This attribute indicates the default send throughput class for all calls using this particular Dna. |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.7 | vctDnaDefaultRecvFrmNetworkWindowSize | 0 | 0 | This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.8 | vctDnaDefaultSendToNetworkWindowSize | 0 | 0 | This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged befo… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.9 | vctDnaPacketSizeNegotiation | 0 | 0 | This attribute, if set to local indicates that packet sizes can be negotiated locally at the interface irrespective of the remot… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.10 | vctDnaCugFormat | 0 | 0 | This attribute specifies which cug format is used when DTE signals CUG indices, basic or extended. This attribute, if set to exte… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.11 | vctDnaCug0AsNonCugCall | 0 | 0 | This attribute, if set to allowed indicates that when a CUG index of 0 is signalled in a call request packet, the call is treate… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.12 | vctDnaSignalPreferentialCugToLink | 0 | 0 | This attribute, if set to no, indicates that, at the destination (called) DTE, when a CUG call is received using the called DTE'… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.13 | vctDnaSignalIntlAddressToLink | 0 | 0 | This attribute, if set to yes, indicates that all addresses presented by the network (DCE) to the link (DTE) within incoming cal… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.14 | vctDnaFastSelectCallsOnly | 0 | 0 | This attribute, if set to yes, indicates that the service is permitted restricted fast select calls in both the incoming and the… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.15 | vctDnaPreselectRpoa | 0 | 0 | This attribute, if set to yes, indicates that this Dna subscribes to a pre-selected RPOA, in which case, the pre-selected RPOA i… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.16 | vctDnaAccountClass | 0 | 0 | This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accou… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.17 | vctDnaAccountCollection | 0 | 0 | This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, stud… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.18 | vctDnaServiceExchange | 0 | 0 | This attribute is an arbitrary number, entered by the network operator. The value of serviceExchange is included in the accountin… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.19 | vctDnaEgressAccounting | 0 | 0 | egressAccounting specifies if Egress accounting is enabled by Frame Relay service. Disabling of Egress accounting means that onl… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.20 | vctDnaRpoa | 0 | 0 | rpoa - Recognized Private Operating Agency is a ITU-T specified facility which allows the user to specify transit network the cal… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.21 | vctDnaDataPath | 0 | 0 | This attribute specifies the data path to be used by Virtual Circuits on this interface. If the connection has a DirectCall comp… |