rpoa - Recognized Private Operating Agency is a ITU-T specified
facility which allows the user to specify
transit network the call should use. The rpoa can override all
routing decisions.
If Dna subscribes to preselectRpoa as indicated by the previously
described attribute, (preselectRpoa set to yes) then this attribute
contains preselected rpoa. If the preselectRpoa attribute is set to no,
then this attribute can be left at its default.
This preselected rpoa will be used for all outgoing call request
packets using this Dna if an rpoa is not explicitly specified in the
call request. The rpoa represents the dnic of the directly connected
network through which the call will be routed in the presence of the
rpoa.
Parsed from file nortelPP-vcTesterV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VcTesterMIB
rpoa - Recognized Private Operating Agency is a ITU-T specified
facility which allows the user to specify
transit network the call should use. The rpoa can override all
routing decisions.
If Dna subscribes to preselectRpoa as indicated by the previously
described attribute, (preselectRpoa set to yes) then this attribute
contains preselected rpoa. If the preselectRpoa attribute is set to no,
then this attribute can be left at its default.
This preselected rpoa will be used for all outgoing call request
packets using this Dna if an rpoa is not explicitly specified in the
call request. The rpoa represents the dnic of the directly connected
network through which the call will be routed in the presence of the
rpoa.
Parsed from file Nortel-Magellan-Passport-VcTesterMIB.mib
Module: Nortel-Magellan-Passport-VcTesterMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VcTesterMIB
[Automatically extracted from oidview.com]
vctDnaRpoa OBJECT-TYPE SYNTAX DigitString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "rpoa - Recognized Private Operating Agency is a ITU-T specified facility which allows the user to specify transit network the call should use. The rpoa can override all routing decisions. If Dna subscribes to preselectRpoa as indicated by the previously described attribute, (preselectRpoa set to yes) then this attribute contains preselected rpoa. If the preselectRpoa attribute is set to no, then this attribute can be left at its default. This preselected rpoa will be used for all outgoing call request packets using this Dna if an rpoa is not explicitly specified in the call request. The rpoa represents the dnic of the directly connected network through which the call will be routed in the presence of the rpoa." DEFVAL { '30303030'H } ::= { vctDnaCallOptionsEntry 20 }
vctDnaRpoa OBJECT-TYPE SYNTAX DigitString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "rpoa - Recognized Private Operating Agency is a ITU-T specified facility which allows the user to specify transit network the call should use. The rpoa can override all routing decisions. If Dna subscribes to preselectRpoa as indicated by the previously described attribute, (preselectRpoa set to yes) then this attribute contains preselected rpoa. If the preselectRpoa attribute is set to no, then this attribute can be left at its default. This preselected rpoa will be used for all outgoing call request packets using this Dna if an rpoa is not explicitly specified in the call request. The rpoa represents the dnic of the directly connected network through which the call will be routed in the presence of the rpoa." DEFVAL { '30303030'H } ::= { vctDnaCallOptionsEntry 20 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.1 | vctDnaServiceCategory | 0 | 0 | This attribute is assigned for each different type of service within which this Dna is configured. It is placed into the Service… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.2 | vctDnaPacketSizes | 0 | 0 | This attribute indicates the allowable packet sizes supported for call setup using this Dna. ITU-T recommends that packet size 1… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.3 | vctDnaDefaultRecvFrmNetworkPacketSize | 0 | 0 | This attribute indicates the default local receive packet size from network to DTE for all calls using this particular Dna. Attr… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.4 | vctDnaDefaultSendToNetworkPacketSize | 0 | 0 | This attribute indicates the default local send packet size from DTE to network for all calls using this particular Dna. Attribut… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.5 | vctDnaDefaultRecvFrmNetworkThruputClass | 0 | 0 | This attribute indicates the default receive throughput class for all calls using this particular Dna. |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.6 | vctDnaDefaultSendToNetworkThruputClass | 0 | 0 | This attribute indicates the default send throughput class for all calls using this particular Dna. |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.7 | vctDnaDefaultRecvFrmNetworkWindowSize | 0 | 0 | This attribute indicates the default number of data packets that can be received by the DTE from the DCE before more packets can… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.8 | vctDnaDefaultSendToNetworkWindowSize | 0 | 0 | This attribute indicates the number of data packets that can be transmitted from the DTE to the DCE and must be acknowledged befo… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.9 | vctDnaPacketSizeNegotiation | 0 | 0 | This attribute, if set to local indicates that packet sizes can be negotiated locally at the interface irrespective of the remot… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.10 | vctDnaCugFormat | 0 | 0 | This attribute specifies which cug format is used when DTE signals CUG indices, basic or extended. This attribute, if set to exte… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.11 | vctDnaCug0AsNonCugCall | 0 | 0 | This attribute, if set to allowed indicates that when a CUG index of 0 is signalled in a call request packet, the call is treate… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.12 | vctDnaSignalPreferentialCugToLink | 0 | 0 | This attribute, if set to no, indicates that, at the destination (called) DTE, when a CUG call is received using the called DTE'… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.13 | vctDnaSignalIntlAddressToLink | 0 | 0 | This attribute, if set to yes, indicates that all addresses presented by the network (DCE) to the link (DTE) within incoming cal… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.14 | vctDnaFastSelectCallsOnly | 0 | 0 | This attribute, if set to yes, indicates that the service is permitted restricted fast select calls in both the incoming and the… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.15 | vctDnaPreselectRpoa | 0 | 0 | This attribute, if set to yes, indicates that this Dna subscribes to a pre-selected RPOA, in which case, the pre-selected RPOA i… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.16 | vctDnaAccountClass | 0 | 0 | This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accou… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.17 | vctDnaAccountCollection | 0 | 0 | This attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, stud… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.18 | vctDnaServiceExchange | 0 | 0 | This attribute is an arbitrary number, entered by the network operator. The value of serviceExchange is included in the accountin… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.19 | vctDnaEgressAccounting | 0 | 0 | egressAccounting specifies if Egress accounting is enabled by Frame Relay service. Disabling of Egress accounting means that onl… |
| 1.3.6.1.4.1.562.2.4.1.5130.2.13.1.21 | vctDnaDataPath | 0 | 0 | This attribute specifies the data path to be used by Virtual Circuits on this interface. If the connection has a DirectCall comp… |