This attribute indicates the priority at which data is transferred to
the network.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
indices from 0 to 15.
Each transfer priority n, where n specifies the transfer priority
index, contains a default setting for routing class of service
(multimedia, delay or throughput) and frame relay egress queue
(depending on the number of supported egress queues on the remote
end interface) specified by the routingClassOfService and
emissionPriority attributes provisioned in the Mod Frs DprsNet
Tpm/n component. The default mapping can be altered by a user if
required.
Parsed from file nortelPP-frameRelayNniV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
This attribute indicates the priority at which data is transferred to
the network.
The transfer priority is a preference configured for an application
according to its delay-sensitivity requirement. Frames with higher
transfer priority are served by the network before the frames with
lower priority. The transfer priority standard is defined to have 16
indices from 0 to 15.
Each transfer priority n, where n specifies the transfer priority
index, contains a default setting for routing class of service
(multimedia, delay or throughput) and frame relay egress queue
(depending on the number of supported egress queues on the remote
end interface) specified by the routingClassOfService and
emissionPriority attributes provisioned in the Mod Frs DprsNet
Tpm/n component. The default mapping can be altered by a user if
required.
Parsed from file Nortel-Magellan-Passport-FrameRelayNniMIB.mib
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
[Automatically extracted from oidview.com]
frNniDlciTransferPriToNwk OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required." ::= { frNniDlciSpOpEntry 10 }
frNniDlciTransferPriToNwk OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required." ::= { frNniDlciSpOpEntry 10 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.1 | frNniDlciMaximumFrameSize | 0 | 0 | This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.2 | frNniDlciRateEnforcement | 0 | 0 | This attribute is obsolete. It provided the same information as the provision attribute rateEnforcement in dlci/* sp. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.3 | frNniDlciCommittedInformationRate | 0 | 0 | This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.4 | frNniDlciCommittedBurstSize | 0 | 0 | This attribute specifies the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.5 | frNniDlciExcessBurstSize | 0 | 0 | This attribute specifies the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt … |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.6 | frNniDlciMeasurementInterval | 0 | 0 | This attribute specifies the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute shoul… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.7 | frNniDlciRateAdaptation | 0 | 0 | This attribute is obsolete. It provided the information which is now in the provision attribute rateAdaptation in dlci/* sp. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.8 | frNniDlciAccounting | 0 | 0 | This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.9 | frNniDlciEmissionPriorityToIf | 0 | 0 | This attribute indicates the emission priority of frames sent to the interface. A larger value denotes a higher priority. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.11 | frNniDlciTransferPriFromNwk | 0 | 0 | This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference confi… |