This attribute specifies the committed information rate (CIR) in bits
per second (bit/s). When rateEnforcement is set to on, cir is the rate
at which the network agrees to transfer information under normal
conditions. This rate is measured over a measurement interval (t)
that is determined internally based on CIR and the committed burst
size (Bc). An exception to this occurs when CIR is provisioned to
be zero, in which case the measurement interval (t) must be
provisioned explicitly.
This attribute should be ignored when rateEnforcement is off.
Parsed from file nortelPP-frameRelayNniV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
This attribute specifies the committed information rate (CIR) in bits
per second (bit/s). When rateEnforcement is set to on, cir is the rate
at which the network agrees to transfer information under normal
conditions. This rate is measured over a measurement interval (t)
that is determined internally based on CIR and the committed burst
size (Bc). An exception to this occurs when CIR is provisioned to
be zero, in which case the measurement interval (t) must be
provisioned explicitly.
This attribute should be ignored when rateEnforcement is off.
Parsed from file Nortel-Magellan-Passport-FrameRelayNniMIB.mib
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-FrameRelayNniMIB
[Automatically extracted from oidview.com]
frNniDlciCommittedInformationRate OBJECT-TYPE SYNTAX Unsigned32 (0..2048000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the network agrees to transfer information under normal conditions. This rate is measured over a measurement interval (t) that is determined internally based on CIR and the committed burst size (Bc). An exception to this occurs when CIR is provisioned to be zero, in which case the measurement interval (t) must be provisioned explicitly. This attribute should be ignored when rateEnforcement is off." ::= { frNniDlciSpOpEntry 3 }
frNniDlciCommittedInformationRate OBJECT-TYPE SYNTAX Unsigned32 (0..2048000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the committed information rate (CIR) in bits per second (bit/s). When rateEnforcement is set to on, cir is the rate at which the network agrees to transfer information under normal conditions. This rate is measured over a measurement interval (t) that is determined internally based on CIR and the committed burst size (Bc). An exception to this occurs when CIR is provisioned to be zero, in which case the measurement interval (t) must be provisioned explicitly. This attribute should be ignored when rateEnforcement is off." ::= { frNniDlciSpOpEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.1 | frNniDlciMaximumFrameSize | 0 | 0 | This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.2 | frNniDlciRateEnforcement | 0 | 0 | This attribute is obsolete. It provided the same information as the provision attribute rateEnforcement in dlci/* sp. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.4 | frNniDlciCommittedBurstSize | 0 | 0 | This attribute specifies the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.5 | frNniDlciExcessBurstSize | 0 | 0 | This attribute specifies the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt … |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.6 | frNniDlciMeasurementInterval | 0 | 0 | This attribute specifies the time interval (in milliseconds) over which rates and burst sizes are measured. This attribute shoul… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.7 | frNniDlciRateAdaptation | 0 | 0 | This attribute is obsolete. It provided the information which is now in the provision attribute rateAdaptation in dlci/* sp. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.8 | frNniDlciAccounting | 0 | 0 | This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.9 | frNniDlciEmissionPriorityToIf | 0 | 0 | This attribute indicates the emission priority of frames sent to the interface. A larger value denotes a higher priority. |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.10 | frNniDlciTransferPriToNwk | 0 | 0 | This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configu… |
| 1.3.6.1.4.1.562.2.4.1.70.5.13.1.11 | frNniDlciTransferPriFromNwk | 0 | 0 | This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference confi… |