This attribute specifies the time after the end of fax traffic before
ingress G.711/G.726 fax idle suppression starts. It applies only if
modemFaxEncoding is g711G726 or faxRelayG711G726 and
negotiatedIgFisG711G726 is on.
faxHangoverTimeG711G726 is not used if this VoiceService is
running on a DS1V, E1V, 1pDS1V, 1pE1V and J2MV card.
Parsed from file nortelPP-voiceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VoiceMIB
This attribute specifies the time after the end of fax traffic before
ingress G.711/G.726 fax idle suppression starts. It applies only if
modemFaxEncoding is g711G726 or faxRelayG711G726 and
negotiatedIgFisG711G726 is on.
faxHangoverTimeG711G726 is not used if this VoiceService is
running on a DS1V, E1V, 1pDS1V, 1pE1V and J2MV card.
Parsed from file Nortel-Magellan-Passport-VoiceMIB.mib
Module: Nortel-Magellan-Passport-VoiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VoiceMIB
[Automatically extracted from oidview.com]
vsFramerFaxHangoverTimeG711G726 OBJECT-TYPE SYNTAX INTEGER (300..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time after the end of fax traffic before ingress G.711/G.726 fax idle suppression starts. It applies only if modemFaxEncoding is g711G726 or faxRelayG711G726 and negotiatedIgFisG711G726 is on. faxHangoverTimeG711G726 is not used if this VoiceService is running on a DS1V, E1V, 1pDS1V, 1pE1V and J2MV card." DEFVAL { 1000 } ::= { vsFramerCoderEntry 36 }
vsFramerFaxHangoverTimeG711G726 OBJECT-TYPE SYNTAX INTEGER (300..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time after the end of fax traffic before ingress G.711/G.726 fax idle suppression starts. It applies only if modemFaxEncoding is g711G726 or faxRelayG711G726 and negotiatedIgFisG711G726 is on. faxHangoverTimeG711G726 is not used if this VoiceService is running on a DS1V, E1V, 1pDS1V, 1pE1V and J2MV card." DEFVAL { 1000 } ::= { vsFramerCoderEntry 36 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.2.4.1.80.2.12.1.1 | vsFramerMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum desired ingress bit rate used during voice traffic when voiceEncoding is g711G726. The nego… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.2 | vsFramerMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum desired ingress bit rate used during voice traffic when voiceEncoding is g711G726. The nego… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.3 | vsFramerMaxModemBitRate | 0 | 0 | This attribute specifies the maximum desired ingress rate used during modemFax and/or fax traffic. Voice traffic is all traffic … |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.4 | vsFramerMinModemBitRate | 0 | 0 | This attribute specifies the minimum desired ingress rate used during modemFax and/or fax traffic. Voice traffic is all traffic … |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.5 | vsFramerAudioGain | 0 | 0 | This attribute has been migrated to egressAudioGain. |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.6 | vsFramerSilenceSuppression | 0 | 0 | This attribute specifies when ingress silence suppression is desired during voice traffic. If silenceSuppression is off, silence… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.7 | vsFramerEchoCancellation | 0 | 0 | This attribute specifies whether echo cancellation is performed on this VoiceService. If echoCancellation is on, the internal ec… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.9 | vsFramerALawConversion | 0 | 0 | This attribute specifies whether mu-law to A-law PCM conversion is performed. aLawConversion only needs to be set to on when thi… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.11 | vsFramerVoiceEncoding | 0 | 0 | This attribute specifies how ingress voice traffic is encoded. If voiceEncoding is g711G726, ingress voice traffic is encoded us… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.12 | vsFramerFaxEncoding | 0 | 0 | This attribute specifies how ingress modemFax and fax traffic are encoded. Voice traffic is all traffic from the start of a call… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.13 | vsFramerTandemPassThrough | 0 | 0 | This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.14 | vsFramerInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.15 | vsFramerEgressAudioGain | 0 | 0 | This attribute has been migrated to ingressAudioGain. |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.16 | vsFramerFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies whether ingress fax idle suppression is desired during G.711 and G.726 fax traffic. It applies only if m… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.17 | vsFramerEndOfCallPattern | 0 | 0 | This attribute specifies the pattern that indicates the end of a CCS call. The pattern is specified as a hexadecimal byte. If th… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.18 | vsFramerIngressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across … |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.19 | vsFramerEgressGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data before it leaves the network. It applies to voice, modem and fax… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.20 | vsFramerComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.21 | vsFramerEchoTailDelay | 0 | 0 | This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the r… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.22 | vsFramerEchoReturnLoss | 0 | 0 | This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.34 | vsFramerDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.35 | vsFramerSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. I… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.37 | vsFramerModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this VoiceService differentiates modemFax traffic and speech. If modemFaxSpeechDiscrim is on and… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.39 | vsFramerV17EncodedAsG711G726 | 0 | 0 | This attribute specifies the desired negotiation between this VoiceService and V.17 fax machines when modemFaxEncoding is faxRela… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.40 | vsFramerEcanBypassMode | 0 | 0 | This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceService. This attribute… |
1.3.6.1.4.1.562.2.4.1.80.2.12.1.41 | vsFramerMaxFaxRelayRate | 0 | 0 | This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or f… |