An entry in the vsPlcProvTable.
Parsed from file nortelPP-voiceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VoiceMIB
An entry in the vsPlcProvTable.
Parsed from file Nortel-Magellan-Passport-VoiceMIB.mib
Module: Nortel-Magellan-Passport-VoiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VoiceMIB
[Automatically extracted from oidview.com]
vsPlcProvEntry OBJECT-TYPE SYNTAX VsPlcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsPlcProvTable." INDEX { vsIndex, vsPlcIndex } ::= { vsPlcProvTable 1 }
vsPlcProvEntry OBJECT-TYPE SYNTAX VsPlcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsPlcProvTable." INDEX { vsIndex, vsPlcIndex } ::= { vsPlcProvTable 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.2 | vsPlcRemoteName | 0 | 0 | This attribute is the PLC's remote end point's address in the format of a Passport component name The syntax of a component is: '… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.3 | vsPlcSetupPriority | 0 | 0 | This attribute gives the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.4 | vsPlcHoldingPriority | 0 | 0 | This attribute gives the priority that a path holds once it is established. Zero is the highest priority and four is the lowest.… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.5 | vsPlcRequiredTxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route.This attribute rep… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.6 | vsPlcRequiredRxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute repres… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.7 | vsPlcRequiredTrafficType | 0 | 0 | This attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.8 | vsPlcPermittedTrunkTypes | 0 | 0 | This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.9 | vsPlcRequiredSecurity | 0 | 0 | This attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.10 | vsPlcRequiredCustomerParm | 0 | 0 | This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to sev… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.11 | vsPlcPathAttributeToMinimize | 0 | 0 | This attribute indicates whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.12 | vsPlcMaximumAcceptableCost | 0 | 0 | This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.13 | vsPlcMaximumAcceptableDelay | 0 | 0 | This attribute indicates an upper bound on the delay of a route, which is the sum of the delay of all trunks on the route. It sh… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.14 | vsPlcEmissionPriority | 0 | 0 | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of … |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.15 | vsPlcDiscardPriority | 0 | 0 | This attribute indicates the importance of the packets on the path. One is used for paths carrying the most important traffic, a… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.16 | vsPlcPathType | 0 | 0 | vsPlcPathtype |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.17 | vsPlcPathFailureAction | 0 | 0 | This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is sele… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.18 | vsPlcBumpPreference | 0 | 0 | This attribute controls when bumping occurs in the route selection process. A connection with higher (numerically less) setupPri… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.19 | vsPlcOptimization | 0 | 0 | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS… |