This attribute indicates the importance of the packets on the path.
One is used for paths carrying the most important traffic, and three
is used for paths carrying the least important traffic. Packets with
lower discardPriority(numerically lower) are discarded after
packets with a higher discardPriority(numerically higher).
Parsed from file nortelPP-voiceV1_BG00S4C.mib.txt
Company: None
Module: Nortel-Magellan-Passport-VoiceMIB
This attribute indicates the importance of the packets on the path.
One is used for paths carrying the most important traffic, and three
is used for paths carrying the least important traffic. Packets with
lower discardPriority(numerically lower) are discarded after
packets with a higher discardPriority(numerically higher).
Parsed from file Nortel-Magellan-Passport-VoiceMIB.mib
Module: Nortel-Magellan-Passport-VoiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-Magellan-Passport-VoiceMIB
[Automatically extracted from oidview.com]
vsPlcDiscardPriority OBJECT-TYPE SYNTAX Unsigned32 (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the importance of the packets on the path. One is used for paths carrying the most important traffic, and three is used for paths carrying the least important traffic. Packets with lower discardPriority(numerically lower) are discarded after packets with a higher discardPriority(numerically higher)." DEFVAL { 1 } ::= { vsPlcProvEntry 15 }
vsPlcDiscardPriority OBJECT-TYPE SYNTAX Unsigned32 (1..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the importance of the packets on the path. One is used for paths carrying the most important traffic, and three is used for paths carrying the least important traffic. Packets with lower discardPriority(numerically lower) are discarded after packets with a higher discardPriority(numerically higher)." DEFVAL { 1 } ::= { vsPlcProvEntry 15 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.2 | vsPlcRemoteName | 0 | 0 | This attribute is the PLC's remote end point's address in the format of a Passport component name The syntax of a component is: '… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.3 | vsPlcSetupPriority | 0 | 0 | This attribute gives the priority at which a path is established. Zero is the highest priority and four is the lowest. When PORS… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.4 | vsPlcHoldingPriority | 0 | 0 | This attribute gives the priority that a path holds once it is established. Zero is the highest priority and four is the lowest.… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.5 | vsPlcRequiredTxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of the trunks of its route.This attribute rep… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.6 | vsPlcRequiredRxBandwidth | 0 | 0 | This attribute gives the bandwidth (in bits per second) reserved by a path on each of trunks of its route. This attribute repres… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.7 | vsPlcRequiredTrafficType | 0 | 0 | This attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.8 | vsPlcPermittedTrunkTypes | 0 | 0 | This attribute lists up to eight(8) types of trunk that can be used on the route. The terrestrial and satellite trunk types have… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.9 | vsPlcRequiredSecurity | 0 | 0 | This attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.10 | vsPlcRequiredCustomerParm | 0 | 0 | This attribute indicates the allowed customer defined parameter of the trunks on the route. Its value, a number from zero to sev… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.11 | vsPlcPathAttributeToMinimize | 0 | 0 | This attribute indicates whether a route is selected on the basis of minimizing the cost or the delay. Each trunk has a cost and… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.12 | vsPlcMaximumAcceptableCost | 0 | 0 | This attribute indicates an upper bound on the cost metric of a route, which is the sum of the cost metrics of all trunks on the… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.13 | vsPlcMaximumAcceptableDelay | 0 | 0 | This attribute indicates an upper bound on the delay of a route, which is the sum of the delay of all trunks on the route. It sh… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.14 | vsPlcEmissionPriority | 0 | 0 | This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. EmissionPriority of … |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.16 | vsPlcPathType | 0 | 0 | vsPlcPathtype |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.17 | vsPlcPathFailureAction | 0 | 0 | This attribute is used to specify whether the application can tolerate momentary interruption of a path while a new path is sele… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.18 | vsPlcBumpPreference | 0 | 0 | This attribute controls when bumping occurs in the route selection process. A connection with higher (numerically less) setupPri… |
| 1.3.6.1.4.1.562.2.4.1.80.3.10.1.19 | vsPlcOptimization | 0 | 0 | This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS… |