This attribute specifies the encapsulation type to be used when sending
packets out this IpPort. If auto is specified, an appropriate value is
selected based on the IpPort media type. The values ieee8023 and
ethernet can only be specified if the media type is ethernet. Otherwise,
auto must be specified. For ethernet media type, the default
encapsulation is ethernet.
Parsed from file nortelPC-ipV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-IpMIB
This attribute specifies the encapsulation type to be used when sending
packets out this IpPort. If auto is specified, an appropriate value is
selected based on the IpPort media type. The values ieee8023 and
ethernet can only be specified if the media type is ethernet. Otherwise,
auto must be specified. For ethernet media type, the default
encapsulation is ethernet.
Parsed from file Nortel-MsCarrier-MscPassport-IpMIB.mib
Module: Nortel-MsCarrier-MscPassport-IpMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-IpMIB
[Automatically extracted from oidview.com]
mscVrPpIpPortEncap OBJECT-TYPE SYNTAX INTEGER { ieee8023(1), ethernet(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encapsulation type to be used when sending packets out this IpPort. If auto is specified, an appropriate value is selected based on the IpPort media type. The values ieee8023 and ethernet can only be specified if the media type is ethernet. Otherwise, auto must be specified. For ethernet media type, the default encapsulation is ethernet." DEFVAL { auto } ::= { mscVrPpIpPortProvEntry 12 }
mscVrPpIpPortEncap OBJECT-TYPE SYNTAX INTEGER { ieee8023(1), ethernet(2), auto(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encapsulation type to be used when sending packets out this IpPort. If auto is specified, an appropriate value is selected based on the IpPort media type. The values ieee8023 and ethernet can only be specified if the media type is ethernet. Otherwise, auto must be specified. For ethernet media type, the default encapsulation is ethernet." DEFVAL { auto } ::= { mscVrPpIpPortProvEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.2 | mscVrPpIpPortMaxTxUnit | 0 | 0 | This attribute specifies the IP MTU (Maximum Transmission Unit) supported by this IpPort. The specified MTU must be within the v… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.3 | mscVrPpIpPortArpStatus | 0 | 0 | This attribute specifies whether ARP is enabled or disabled on this IpPort. If auto is specified, an appropriate value will be s… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.4 | mscVrPpIpPortProxyArpStatus | 0 | 0 | This attribute specifies whether Proxy ARP is enabled or disabled for this IpPort. |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.5 | mscVrPpIpPortArpNoLearn | 0 | 0 | This attribute specifies whether or not dynamic host entries will be installed in the ARP table when ARP packets are received on… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.6 | mscVrPpIpPortSendRedirect | 0 | 0 | This attribute specifies whether or not ICMP host redirects will be sent out this IpPort. |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.7 | mscVrPpIpPortMulticastStatus | 0 | 0 | This attribute specifies whether or not IP multicast packets can be sent out this IpPort. If auto is specified, an appropriate v… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.8 | mscVrPpIpPortRelayAddress | 0 | 0 | This attribute specifies a relay broadcast address for this IpPort. Each packet, received on this IpPort, meeting the relay broa… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.9 | mscVrPpIpPortRelayBroadcast | 0 | 0 | This attribute specifies how packets, received on other IpPorts, meeting the relay broadcast criteria, will be forwarded out thi… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.10 | mscVrPpIpPortLinkModel | 0 | 0 | This attribute specifies the link model to use when the media type for this IpPort is PPP (Point to Point Protocol). A value of l… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.11 | mscVrPpIpPortLanModel | 0 | 0 | This attribute specifies the lan model to use for this IpPort. |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.13 | mscVrPpIpPortIcmpMaskReply | 0 | 0 | This attribute specifies whether or not replies will be generated in response to ICMP Address Mask Requests received on this IpP… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.14 | mscVrPpIpPortDirectedBroadcast | 0 | 0 | This attribute specifies whether or not directed broadcast to physical broadcast translation is enabled for incoming traffic on … |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.15 | mscVrPpIpPortAssignedQos | 0 | 0 | This attribute specifies the initial Class of Service (CoS) given to each packet received on the IpPort. The CoS value n is used… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.16 | mscVrPpIpPortAllowMcastMacDest | 0 | 0 | This attribute specifies whether a multicast destination MAC address is valid on this IpPort or not. Enabling it is non-standard… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.17 | mscVrPpIpPortCosPolicyAssignment | 0 | 0 | This attribute specifies the CosPolicyGroup component this IpPort component is using. Assigning a particular policy group to the… |