This attribute specifies whether or not directed broadcast to physical
broadcast translation is enabled for incoming traffic on this IpPort. The
IP router requirement (RFC1812) says this translation should be
enabled; however, in some network environments, setting this attribute
to disabled may prevent operational problem such as broadcast storms.
Note that in some configuration, setting this attribute to disabled may
cause Bootp to fail.
Parsed from file nortelPC-ipV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-IpMIB
This attribute specifies whether or not directed broadcast to physical
broadcast translation is enabled for incoming traffic on this IpPort. The
IP router requirement (RFC1812) says this translation should be
enabled; however, in some network environments, setting this attribute
to disabled may prevent operational problem such as broadcast storms.
Note that in some configuration, setting this attribute to disabled may
cause Bootp to fail.
Parsed from file Nortel-MsCarrier-MscPassport-IpMIB.mib
Module: Nortel-MsCarrier-MscPassport-IpMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-IpMIB
[Automatically extracted from oidview.com]
mscVrPpIpPortDirectedBroadcast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether or not directed broadcast to physical broadcast translation is enabled for incoming traffic on this IpPort. The IP router requirement (RFC1812) says this translation should be enabled; however, in some network environments, setting this attribute to disabled may prevent operational problem such as broadcast storms. Note that in some configuration, setting this attribute to disabled may cause Bootp to fail." DEFVAL { enabled } ::= { mscVrPpIpPortProvEntry 14 }
mscVrPpIpPortDirectedBroadcast OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether or not directed broadcast to physical broadcast translation is enabled for incoming traffic on this IpPort. The IP router requirement (RFC1812) says this translation should be enabled; however, in some network environments, setting this attribute to disabled may prevent operational problem such as broadcast storms. Note that in some configuration, setting this attribute to disabled may cause Bootp to fail." DEFVAL { enabled } ::= { mscVrPpIpPortProvEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.2 | mscVrPpIpPortMaxTxUnit | 0 | 0 | This attribute specifies the IP MTU (Maximum Transmission Unit) supported by this IpPort. The specified MTU must be within the v… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.3 | mscVrPpIpPortArpStatus | 0 | 0 | This attribute specifies whether ARP is enabled or disabled on this IpPort. If auto is specified, an appropriate value will be s… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.4 | mscVrPpIpPortProxyArpStatus | 0 | 0 | This attribute specifies whether Proxy ARP is enabled or disabled for this IpPort. |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.5 | mscVrPpIpPortArpNoLearn | 0 | 0 | This attribute specifies whether or not dynamic host entries will be installed in the ARP table when ARP packets are received on… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.6 | mscVrPpIpPortSendRedirect | 0 | 0 | This attribute specifies whether or not ICMP host redirects will be sent out this IpPort. |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.7 | mscVrPpIpPortMulticastStatus | 0 | 0 | This attribute specifies whether or not IP multicast packets can be sent out this IpPort. If auto is specified, an appropriate v… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.8 | mscVrPpIpPortRelayAddress | 0 | 0 | This attribute specifies a relay broadcast address for this IpPort. Each packet, received on this IpPort, meeting the relay broa… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.9 | mscVrPpIpPortRelayBroadcast | 0 | 0 | This attribute specifies how packets, received on other IpPorts, meeting the relay broadcast criteria, will be forwarded out thi… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.10 | mscVrPpIpPortLinkModel | 0 | 0 | This attribute specifies the link model to use when the media type for this IpPort is PPP (Point to Point Protocol). A value of l… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.11 | mscVrPpIpPortLanModel | 0 | 0 | This attribute specifies the lan model to use for this IpPort. |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.12 | mscVrPpIpPortEncap | 0 | 0 | This attribute specifies the encapsulation type to be used when sending packets out this IpPort. If auto is specified, an approp… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.13 | mscVrPpIpPortIcmpMaskReply | 0 | 0 | This attribute specifies whether or not replies will be generated in response to ICMP Address Mask Requests received on this IpP… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.15 | mscVrPpIpPortAssignedQos | 0 | 0 | This attribute specifies the initial Class of Service (CoS) given to each packet received on the IpPort. The CoS value n is used… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.16 | mscVrPpIpPortAllowMcastMacDest | 0 | 0 | This attribute specifies whether a multicast destination MAC address is valid on this IpPort or not. Enabling it is non-standard… |
| 1.3.6.1.4.1.562.36.2.1.100.3.5.10.1.17 | mscVrPpIpPortCosPolicyAssignment | 0 | 0 | This attribute specifies the CosPolicyGroup component this IpPort component is using. Assigning a particular policy group to the… |