This attribute specifies whether the CIR attributes
committedInformationRate, committedBurst, and excessBurst are used to
define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess
burst thresholds are exceeded, the frame in violation will be discarded
immediately if a HibernationQueue subcomponent is not provisioned
under the StDlci component (static entries only). If a HibernationQueue
is provisioned, the frame will be placed on the HibernationQueue at
time of violation and transmission will be attempted later after the point
at which the burst thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this
attribute to disabled.
Setting this attribute will operationally override the corresponding
provisional value on static entries.
Parsed from file nortelPC-frameRelayDteV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
This attribute specifies whether the CIR attributes
committedInformationRate, committedBurst, and excessBurst are used to
define rate enforcement on this user DLCI.
If rateEnforcement is enabled, and the combined Committed and Excess
burst thresholds are exceeded, the frame in violation will be discarded
immediately if a HibernationQueue subcomponent is not provisioned
under the StDlci component (static entries only). If a HibernationQueue
is provisioned, the frame will be placed on the HibernationQueue at
time of violation and transmission will be attempted later after the point
at which the burst thresholds will no longer be exceeded.
Setting all the CIR attributes to zero has the same affect as setting this
attribute to disabled.
Setting this attribute will operationally override the corresponding
provisional value on static entries.
Parsed from file Nortel-MsCarrier-MscPassport-FrameRelayDteMIB.mib
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
[Automatically extracted from oidview.com]
mscFrDteDlciRateEnforcement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI. If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component (static entries only). If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded. Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { disabled } ::= { mscFrDteDlciOperEntry 17 }
mscFrDteDlciRateEnforcement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define rate enforcement on this user DLCI. If rateEnforcement is enabled, and the combined Committed and Excess burst thresholds are exceeded, the frame in violation will be discarded immediately if a HibernationQueue subcomponent is not provisioned under the StDlci component (static entries only). If a HibernationQueue is provisioned, the frame will be placed on the HibernationQueue at time of violation and transmission will be attempted later after the point at which the burst thresholds will no longer be exceeded. Setting all the CIR attributes to zero has the same affect as setting this attribute to disabled. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { disabled } ::= { mscFrDteDlciOperEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.4 | mscFrDteDlciDlciState | 0 | 0 | This attribute reflects the current operational circuit state of the Dlci. The state active indicates that the circuit is up and… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.5 | mscFrDteDlciLastTimeChange | 0 | 0 | The last time dlciState changed state. |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.7 | mscFrDteDlciSentFrames | 0 | 0 | Number of frames transmitted across the interface. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.8 | mscFrDteDlciSentOctets | 0 | 0 | The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.9 | mscFrDteDlciReceivedFrames | 0 | 0 | Number of frames received across the interface. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.10 | mscFrDteDlciReceivedOctets | 0 | 0 | The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.11 | mscFrDteDlciReceivedFECNs | 0 | 0 | Number of frames with the FECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.12 | mscFrDteDlciReceivedBECNs | 0 | 0 | Number of frames with the BECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.13 | mscFrDteDlciDiscardedFrames | 0 | 0 | The number of inbound frames dropped because of format errors, or because the VC was inactive. This counter will wrap around to … |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.14 | mscFrDteDlciCreationType | 0 | 0 | This indicates whether the virtual circuit was manually created (static), or dynamically created (dynamic) via the data link con… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.15 | mscFrDteDlciCreationTime | 0 | 0 | The time when the circuit was created, whether by the Data Link Connection Management Interface or by an SNMP set request. |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.18 | mscFrDteDlciCommittedInformationRate | 0 | 0 | The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link s… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.19 | mscFrDteDlciCommittedBurst | 0 | 0 | The committed burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the … |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.20 | mscFrDteDlciExcessBurst | 0 | 0 | The excess burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the co… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.21 | mscFrDteDlciExcessBurstAction | 0 | 0 | This attribute specifies the action taken when the committedBurst size has been exceeded on the Dlci but the excessBurst size ha… |