This attribute specifies the action taken when the committedBurst size
has been exceeded on the Dlci but the excessBurst size has not. If the
attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay
header will be turned on. If the attribute is set to none, no action will be
taken.
Setting this attribute will operationally override the corresponding
provisional value on static entries.
Parsed from file nortelPC-frameRelayDteV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
This attribute specifies the action taken when the committedBurst size
has been exceeded on the Dlci but the excessBurst size has not. If the
attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay
header will be turned on. If the attribute is set to none, no action will be
taken.
Setting this attribute will operationally override the corresponding
provisional value on static entries.
Parsed from file Nortel-MsCarrier-MscPassport-FrameRelayDteMIB.mib
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-FrameRelayDteMIB
[Automatically extracted from oidview.com]
mscFrDteDlciExcessBurstAction OBJECT-TYPE SYNTAX INTEGER { none(1), setDeBit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action taken when the committedBurst size has been exceeded on the Dlci but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { none } ::= { mscFrDteDlciOperEntry 21 }
mscFrDteDlciExcessBurstAction OBJECT-TYPE SYNTAX INTEGER { none(1), setDeBit(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action taken when the committedBurst size has been exceeded on the Dlci but the excessBurst size has not. If the attribute is set to setDeBit, the Discard Eligibility bit in the Frame Relay header will be turned on. If the attribute is set to none, no action will be taken. Setting this attribute will operationally override the corresponding provisional value on static entries." DEFVAL { none } ::= { mscFrDteDlciOperEntry 21 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.4 | mscFrDteDlciDlciState | 0 | 0 | This attribute reflects the current operational circuit state of the Dlci. The state active indicates that the circuit is up and… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.5 | mscFrDteDlciLastTimeChange | 0 | 0 | The last time dlciState changed state. |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.7 | mscFrDteDlciSentFrames | 0 | 0 | Number of frames transmitted across the interface. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.8 | mscFrDteDlciSentOctets | 0 | 0 | The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.9 | mscFrDteDlciReceivedFrames | 0 | 0 | Number of frames received across the interface. This counter will wrap around to 0 when it exceeds its maximum count. |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.10 | mscFrDteDlciReceivedOctets | 0 | 0 | The number of octets sent from this virtual circuit since it was created. This counter will wrap around to 0 when it exceeds its… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.11 | mscFrDteDlciReceivedFECNs | 0 | 0 | Number of frames with the FECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.12 | mscFrDteDlciReceivedBECNs | 0 | 0 | Number of frames with the BECN bit set received from the network. This counter will wrap around to 0 when it exceeds its maximum… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.13 | mscFrDteDlciDiscardedFrames | 0 | 0 | The number of inbound frames dropped because of format errors, or because the VC was inactive. This counter will wrap around to … |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.14 | mscFrDteDlciCreationType | 0 | 0 | This indicates whether the virtual circuit was manually created (static), or dynamically created (dynamic) via the data link con… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.15 | mscFrDteDlciCreationTime | 0 | 0 | The time when the circuit was created, whether by the Data Link Connection Management Interface or by an SNMP set request. |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.17 | mscFrDteDlciRateEnforcement | 0 | 0 | This attribute specifies whether the CIR attributes committedInformationRate, committedBurst, and excessBurst are used to define … |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.18 | mscFrDteDlciCommittedInformationRate | 0 | 0 | The average number of bits to be transferred per second over the DLCI to the DCE. When this attribute is set to zero, the link s… |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.19 | mscFrDteDlciCommittedBurst | 0 | 0 | The committed burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the … |
| 1.3.6.1.4.1.562.36.2.1.101.8.11.1.20 | mscFrDteDlciExcessBurst | 0 | 0 | The excess burst size (in bits) to which the DLCI wants to subscribe. Setting this attribute will operationally override the co… |