During route computation, APPN determines the optimum route
through a network in the following steps:
- obtains the required route characteristics from the COS database
using the mode name specified in the session request
- determines all possible combinations of transmission groups and
nodes that form a route to the destination database
- the actual characteristics of the Nodes and TGs in these routes are
compared against the COS tables that contain the required
characteristics of the session. A weight is assigned based on how
well the actual characteristics meet the required characteristics.
Where there is no match between actual and required
characteristics, the route containing the node or TG is excluded
from further computation.
- Each possible route is quantified by adding the weights assigned
to the node and TGs in the route. The route with the lowest weight
is the one used for the session.
This attribute is part of the COS tables and specifies the maximum
cost per connect time for a TG. It is represented by a number
between 0 and 255 and is the relative cost of using a TG. The units
for cost-per-connect time are installation-defined and are typically
based on the applicable tariffs of the transmission facility being
used by the TG. The cost per connect time values that a network
administrator assigns to the TGs in a network should reflect the
relative expense of each TG as compared to all other TGs in the
network. A value of 0 means that there is no additional cost in
connecting over the TG (as in the case of a non-switched facility).
Parsed from file nortelPC-appnV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AppnMIB
During route computation, APPN determines the optimum route
through a network in the following steps:
- obtains the required route characteristics from the COS database
using the mode name specified in the session request
- determines all possible combinations of transmission groups and
nodes that form a route to the destination database
- the actual characteristics of the Nodes and TGs in these routes are
compared against the COS tables that contain the required
characteristics of the session. A weight is assigned based on how
well the actual characteristics meet the required characteristics.
Where there is no match between actual and required
characteristics, the route containing the node or TG is excluded
from further computation.
- Each possible route is quantified by adding the weights assigned
to the node and TGs in the route. The route with the lowest weight
is the one used for the session.
This attribute is part of the COS tables and specifies the maximum
cost per connect time for a TG. It is represented by a number
between 0 and 255 and is the relative cost of using a TG. The units
for cost-per-connect time are installation-defined and are typically
based on the applicable tariffs of the transmission facility being
used by the TG. The cost per connect time values that a network
administrator assigns to the TGs in a network should reflect the
relative expense of each TG as compared to all other TGs in the
network. A value of 0 means that there is no additional cost in
connecting over the TG (as in the case of a non-switched facility).
Parsed from file Nortel-MsCarrier-MscPassport-AppnMIB.mib
Module: Nortel-MsCarrier-MscPassport-AppnMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AppnMIB
[Automatically extracted from oidview.com]
mscAppnCosTgMaxConnectCost OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per connect time for a TG. It is represented by a number between 0 and 255 and is the relative cost of using a TG. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the TG. The cost per connect time values that a network administrator assigns to the TGs in a network should reflect the relative expense of each TG as compared to all other TGs in the network. A value of 0 means that there is no additional cost in connecting over the TG (as in the case of a non-switched facility)." DEFVAL { 255 } ::= { mscAppnCosTgProvEntry 4 }
mscAppnCosTgMaxConnectCost OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per connect time for a TG. It is represented by a number between 0 and 255 and is the relative cost of using a TG. The units for cost-per-connect time are installation-defined and are typically based on the applicable tariffs of the transmission facility being used by the TG. The cost per connect time values that a network administrator assigns to the TGs in a network should reflect the relative expense of each TG as compared to all other TGs in the network. A value of 0 means that there is no additional cost in connecting over the TG (as in the case of a non-switched facility)." DEFVAL { 255 } ::= { mscAppnCosTgProvEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.1 | mscAppnCosTgMinEffectiveCapacity | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.2 | mscAppnCosTgMaxEffectiveCapacity | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.3 | mscAppnCosTgMinConnectCost | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.5 | mscAppnCosTgMinByteCost | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.6 | mscAppnCosTgMaxByteCost | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.7 | mscAppnCosTgMinSecurity | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.8 | mscAppnCosTgMaxSecurity | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.9 | mscAppnCosTgMinPropDelay | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.10 | mscAppnCosTgMaxPropDelay | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.11 | mscAppnCosTgMinModemClass | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.12 | mscAppnCosTgMaxModemClass | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.13 | mscAppnCosTgMinUserDefParm1 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.14 | mscAppnCosTgMaxUserDefParm1 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.15 | mscAppnCosTgMinUserDefParm2 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.16 | mscAppnCosTgMaxUserDefParm2 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.17 | mscAppnCosTgMinUserDefParm3 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.18 | mscAppnCosTgMaxUserDefParm3 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |