During route computation, APPN determines the optimum route
through a network in the following steps:
- obtains the required route characteristics from the COS database
using the mode name specified in the session request
- determines all possible combinations of transmission groups and
nodes that form a route to the destination database
- the actual characteristics of the Nodes and TGs in these routes are
compared against the COS tables that contain the required
characteristics of the session. A weight is assigned based on how
well the actual characteristics meet the required characteristics.
Where there is no match between actual and required
characteristics, the route containing the node or TG is excluded
from further computation.
- Each possible route is quantified by adding the weights assigned
to the node and TGs in the route. The route with the lowest weight
is the one used for the session.
This attribute is part of the COS tables and specifies the maximum
cost per byte allowed for a TG to be used for a session. It is a single
byte value in the range 0 to 255 that expresses a relative cost of
transmitting a byte over the associated TG. The units for cost per
byte are user defined. Like cost per connect time, cost per byte is
network specific and will not be uniform across networks unless
assignments are coordinated.
Parsed from file nortelPC-appnV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AppnMIB
During route computation, APPN determines the optimum route
through a network in the following steps:
- obtains the required route characteristics from the COS database
using the mode name specified in the session request
- determines all possible combinations of transmission groups and
nodes that form a route to the destination database
- the actual characteristics of the Nodes and TGs in these routes are
compared against the COS tables that contain the required
characteristics of the session. A weight is assigned based on how
well the actual characteristics meet the required characteristics.
Where there is no match between actual and required
characteristics, the route containing the node or TG is excluded
from further computation.
- Each possible route is quantified by adding the weights assigned
to the node and TGs in the route. The route with the lowest weight
is the one used for the session.
This attribute is part of the COS tables and specifies the maximum
cost per byte allowed for a TG to be used for a session. It is a single
byte value in the range 0 to 255 that expresses a relative cost of
transmitting a byte over the associated TG. The units for cost per
byte are user defined. Like cost per connect time, cost per byte is
network specific and will not be uniform across networks unless
assignments are coordinated.
Parsed from file Nortel-MsCarrier-MscPassport-AppnMIB.mib
Module: Nortel-MsCarrier-MscPassport-AppnMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AppnMIB
[Automatically extracted from oidview.com]
mscAppnCosTgMaxByteCost OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per byte allowed for a TG to be used for a session. It is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated TG. The units for cost per byte are user defined. Like cost per connect time, cost per byte is network specific and will not be uniform across networks unless assignments are coordinated." DEFVAL { 255 } ::= { mscAppnCosTgProvEntry 6 }
mscAppnCosTgMaxByteCost OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required route characteristics from the COS database using the mode name specified in the session request - determines all possible combinations of transmission groups and nodes that form a route to the destination database - the actual characteristics of the Nodes and TGs in these routes are compared against the COS tables that contain the required characteristics of the session. A weight is assigned based on how well the actual characteristics meet the required characteristics. Where there is no match between actual and required characteristics, the route containing the node or TG is excluded from further computation. - Each possible route is quantified by adding the weights assigned to the node and TGs in the route. The route with the lowest weight is the one used for the session. This attribute is part of the COS tables and specifies the maximum cost per byte allowed for a TG to be used for a session. It is a single byte value in the range 0 to 255 that expresses a relative cost of transmitting a byte over the associated TG. The units for cost per byte are user defined. Like cost per connect time, cost per byte is network specific and will not be uniform across networks unless assignments are coordinated." DEFVAL { 255 } ::= { mscAppnCosTgProvEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.1 | mscAppnCosTgMinEffectiveCapacity | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.2 | mscAppnCosTgMaxEffectiveCapacity | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.3 | mscAppnCosTgMinConnectCost | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.4 | mscAppnCosTgMaxConnectCost | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.5 | mscAppnCosTgMinByteCost | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.7 | mscAppnCosTgMinSecurity | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.8 | mscAppnCosTgMaxSecurity | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.9 | mscAppnCosTgMinPropDelay | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.10 | mscAppnCosTgMaxPropDelay | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.11 | mscAppnCosTgMinModemClass | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.12 | mscAppnCosTgMaxModemClass | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.13 | mscAppnCosTgMinUserDefParm1 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.14 | mscAppnCosTgMaxUserDefParm1 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.15 | mscAppnCosTgMinUserDefParm2 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.16 | mscAppnCosTgMaxUserDefParm2 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.17 | mscAppnCosTgMinUserDefParm3 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |
1.3.6.1.4.1.562.36.2.1.110.17.10.10.1.18 | mscAppnCosTgMaxUserDefParm3 | 0 | 0 | During route computation, APPN determines the optimum route through a network in the following steps: - obtains the required rout… |