This attribute specifies the holding priority which applies to SVP
and SVC CBR connections. It takes a value from 0 (highest
priority) to 4 (lowest priority). In a situation where the link
bandwidth fluctuates, such as over an IMA link, holding priority is
used to determine which connections are held and which are
released. Holding priority 4 connections are the first to be released.
Holding priority 0 connections are the last to be released.
This attribute does not apply to Vpt Vccs. When bandwidth
fluctuates, the entire Vpt, along with all Vpt Vccs is released as a
unit, according to the Vpt's holdingPriority.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the holding priority which applies to SVP
and SVC CBR connections. It takes a value from 0 (highest
priority) to 4 (lowest priority). In a situation where the link
bandwidth fluctuates, such as over an IMA link, holding priority is
used to determine which connections are held and which are
released. Holding priority 4 connections are the first to be released.
Holding priority 0 connections are the last to be released.
This attribute does not apply to Vpt Vccs. When bandwidth
fluctuates, the entire Vpt, along with all Vpt Vccs is released as a
unit, according to the Vpt's holdingPriority.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCACbrHoldingPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the holding priority which applies to SVP and SVC CBR connections. It takes a value from 0 (highest priority) to 4 (lowest priority). In a situation where the link bandwidth fluctuates, such as over an IMA link, holding priority is used to determine which connections are held and which are released. Holding priority 4 connections are the first to be released. Holding priority 0 connections are the last to be released. This attribute does not apply to Vpt Vccs. When bandwidth fluctuates, the entire Vpt, along with all Vpt Vccs is released as a unit, according to the Vpt's holdingPriority." DEFVAL { n3 } ::= { mscAtmIfCACbrProvEntry 61 }
mscAtmIfCACbrHoldingPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the holding priority which applies to SVP and SVC CBR connections. It takes a value from 0 (highest priority) to 4 (lowest priority). In a situation where the link bandwidth fluctuates, such as over an IMA link, holding priority is used to determine which connections are held and which are released. Holding priority 4 connections are the first to be released. Holding priority 0 connections are the last to be released. This attribute does not apply to Vpt Vccs. When bandwidth fluctuates, the entire Vpt, along with all Vpt Vccs is released as a unit, according to the Vpt's holdingPriority." DEFVAL { n3 } ::= { mscAtmIfCACbrProvEntry 61 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.10 | mscAtmIfCACbrProvPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the constant bit rate (CBR) service category except f… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.20 | mscAtmIfCACbrProvCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the CBR service category excep… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.30 | mscAtmIfCACbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for CBR tr… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.40 | mscAtmIfCACbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for CBR traffic. … |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.50 | mscAtmIfCACbrProvClr | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for CBR traffic except for connections managed by a Vpt CA. The num… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.60 | mscAtmIfCACbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the CBR service c… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.70 | mscAtmIfCACbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR connections. It takes a value from 0 (highest pri… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.71 | mscAtmIfCACbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR point-to-multipoint connections. It takes a value… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.80 | mscAtmIfCACbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the CBR service category. This attribut… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.90 | mscAtmIfCACbrPerVcQueueLimitReferenceRate | 0 | 0 | This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the CB… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.100 | mscAtmIfCACbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.140 | mscAtmIfCACbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the CBR service category. An override to this def… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.150 | mscAtmIfCACbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the CBR service category. This is the policy which is used to recoup shap… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.160 | mscAtmIfCACbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the CBR service category. On ATM IP cards, this a… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.165 | mscAtmIfCACbrWeightPolicy | 0 | 0 | This attribute specifies the default policy which is applied when calculating the fairness weight for unshaped connections of th… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.169 | mscAtmIfCACbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all CBR connections. An override to th… |
| 1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.170 | mscAtmIfCACbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the CBR service category. This attr… |