This attribute specifies the shaping rate to be used in computing the
tolerable delay for per-VC queues of connections of the CBR
service category. The delay is computed as the txQueueLimit
divided by the value of this attribute.
This attribute is ignored on CQC-based ATM cards and
1pOC12SmLrAtm cards, because they do not support per-VC
queues at the CBR service category.
When the value of this attribute is autoConfigure, an appropriate
default is selected based on the card type. It is set to 80000 for all
cards which support per-VC queuing at the CBR service category
(3pDS3Atm2, 3pE3Atm2, 2pOC3SmAtm2, 2pOC3MmAtm2). For
4pOC12SmIrAtm and 4pOC12SmLrAtm cards, the reference rate is
set to 65511 for DS3 and OC3 channels, and set to 262044 for
OC12 channels. For Apc-based cards the maximum value is
1416905. For all other cards, the maximum value is 943396.
For Vpts, this attribute does not apply. Regardless of Vpt service
category, standard Vpts always use the AtmIf Ca NrtVbr
perVcQueueLimitReferenceRate value as their default.
VALUES (
0 = autoConfigure
)
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the shaping rate to be used in computing the
tolerable delay for per-VC queues of connections of the CBR
service category. The delay is computed as the txQueueLimit
divided by the value of this attribute.
This attribute is ignored on CQC-based ATM cards and
1pOC12SmLrAtm cards, because they do not support per-VC
queues at the CBR service category.
When the value of this attribute is autoConfigure, an appropriate
default is selected based on the card type. It is set to 80000 for all
cards which support per-VC queuing at the CBR service category
(3pDS3Atm2, 3pE3Atm2, 2pOC3SmAtm2, 2pOC3MmAtm2). For
4pOC12SmIrAtm and 4pOC12SmLrAtm cards, the reference rate is
set to 65511 for DS3 and OC3 channels, and set to 262044 for
OC12 channels. For Apc-based cards the maximum value is
1416905. For all other cards, the maximum value is 943396.
For Vpts, this attribute does not apply. Regardless of Vpt service
category, standard Vpts always use the AtmIf Ca NrtVbr
perVcQueueLimitReferenceRate value as their default.
VALUES (
0 = autoConfigure
)
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfCACbrPerVcQueueLimitReferenceRate OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..1416905) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the CBR service category. The delay is computed as the txQueueLimit divided by the value of this attribute. This attribute is ignored on CQC-based ATM cards and 1pOC12SmLrAtm cards, because they do not support per-VC queues at the CBR service category. When the value of this attribute is autoConfigure, an appropriate default is selected based on the card type. It is set to 80000 for all cards which support per-VC queuing at the CBR service category (3pDS3Atm2, 3pE3Atm2, 2pOC3SmAtm2, 2pOC3MmAtm2). For 4pOC12SmIrAtm and 4pOC12SmLrAtm cards, the reference rate is set to 65511 for DS3 and OC3 channels, and set to 262044 for OC12 channels. For Apc-based cards the maximum value is 1416905. For all other cards, the maximum value is 943396. For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr perVcQueueLimitReferenceRate value as their default. VALUES ( 0 = autoConfigure )" DEFVAL { 0 } ::= { mscAtmIfCACbrProvEntry 90 }
mscAtmIfCACbrPerVcQueueLimitReferenceRate OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..1416905) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the shaping rate to be used in computing the tolerable delay for per-VC queues of connections of the CBR service category. The delay is computed as the txQueueLimit divided by the value of this attribute. This attribute is ignored on CQC-based ATM cards and 1pOC12SmLrAtm cards, because they do not support per-VC queues at the CBR service category. When the value of this attribute is autoConfigure, an appropriate default is selected based on the card type. It is set to 80000 for all cards which support per-VC queuing at the CBR service category (3pDS3Atm2, 3pE3Atm2, 2pOC3SmAtm2, 2pOC3MmAtm2). For 4pOC12SmIrAtm and 4pOC12SmLrAtm cards, the reference rate is set to 65511 for DS3 and OC3 channels, and set to 262044 for OC12 channels. For Apc-based cards the maximum value is 1416905. For all other cards, the maximum value is 943396. For Vpts, this attribute does not apply. Regardless of Vpt service category, standard Vpts always use the AtmIf Ca NrtVbr perVcQueueLimitReferenceRate value as their default. VALUES ( 0 = autoConfigure )" DEFVAL { 0 } ::= { mscAtmIfCACbrProvEntry 90 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.10 | mscAtmIfCACbrProvPool | 0 | 0 | This attribute specifies the bandwidth pool which is to be used to support the constant bit rate (CBR) service category except f… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.20 | mscAtmIfCACbrProvCdvt | 0 | 0 | This attribute specifies the default cell delay variation tolerance (CDVT) for all connections of the CBR service category excep… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.30 | mscAtmIfCACbrCdv | 0 | 0 | This attribute specifies the peak-to-peak cell delay variation (CDV) which is contributed to the entire ATM Interface for CBR tr… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.40 | mscAtmIfCACbrMaxCtd | 0 | 0 | This attribute specifies the maximum cell transfer delay (MaxCTD) which is applied to the entire ATM Interface for CBR traffic. … |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.50 | mscAtmIfCACbrProvClr | 0 | 0 | This attribute specifies the tolerable cell loss ratio (CLR) for CBR traffic except for connections managed by a Vpt CA. The num… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.60 | mscAtmIfCACbrTxQueueLimit | 0 | 0 | This attribute specifies the default maximum queue length for the emission queues used to buffer the traffic of the CBR service c… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.61 | mscAtmIfCACbrHoldingPriority | 0 | 0 | This attribute specifies the holding priority which applies to SVP and SVC CBR connections. It takes a value from 0 (highest prio… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.70 | mscAtmIfCACbrSvcHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR connections. It takes a value from 0 (highest pri… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.71 | mscAtmIfCACbrSvcMpHoldingPriority | 0 | 0 | This attribute specifies the default holding priority which applies to SVC CBR point-to-multipoint connections. It takes a value… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.80 | mscAtmIfCACbrMinPerVcQueueLimit | 0 | 0 | This attribute specifies the minimum queue limit for the per-VC queues of connections of the CBR service category. This attribut… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.100 | mscAtmIfCACbrEmissionPriority | 0 | 0 | This attribute is not applicable and is ignored for CQC-based ATM cards. This attribute specifies the emission priority (EP) whi… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.140 | mscAtmIfCACbrTrafficShaping | 0 | 0 | This attribute specifies the default traffic shaping option for connections of the CBR service category. An override to this def… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.150 | mscAtmIfCACbrShapeRecoupPolicy | 0 | 0 | This attribute specifies the shaping recoup policy for the CBR service category. This is the policy which is used to recoup shap… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.160 | mscAtmIfCACbrUnshapedTransmitQueueing | 0 | 0 | This attribute specifies the default queuing option for unshaped connections of the CBR service category. On ATM IP cards, this a… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.165 | mscAtmIfCACbrWeightPolicy | 0 | 0 | This attribute specifies the default policy which is applied when calculating the fairness weight for unshaped connections of th… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.169 | mscAtmIfCACbrForceTagging | 0 | 0 | This attribute specifies the default of whether to force tagging (CLP=1) of all cells for all CBR connections. An override to th… |
1.3.6.1.4.1.562.36.2.1.114.3.2.100.1.170 | mscAtmIfCACbrUsageParameterControl | 0 | 0 | This attribute specifies the default usage parameter control (UPC) option for connections of the CBR service category. This attr… |