This attribute specifies whether the connection (VCC) should be
configured with elastic bandwidth or not. Elastic bandwidth is of
importance in conjuction with IMA links, where some links fail and
the resulting bandwidth is less than the requested bandwidth for all
connections. In that case, some connections may be reduced in
bandwidth based on the setting of the bwElastic attribute.
If this attribute is set to yes, the Test application signals to the
connection that the bandwidth for this connection is elastic, and
may be reduced in the case of IMA link failures. If the bandwidth is
reduced, the rate of test cells which can be handled by the
connection will also be reduced.
If this attribute is set to no, the Test application signals to the
connection that the bandwidth for this connection must be
maintained at the requested level. If the connection cannot maintain
the full bandwidth, the connection may be released (cleared) based
on the holding priority of the connection.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies whether the connection (VCC) should be
configured with elastic bandwidth or not. Elastic bandwidth is of
importance in conjuction with IMA links, where some links fail and
the resulting bandwidth is less than the requested bandwidth for all
connections. In that case, some connections may be reduced in
bandwidth based on the setting of the bwElastic attribute.
If this attribute is set to yes, the Test application signals to the
connection that the bandwidth for this connection is elastic, and
may be reduced in the case of IMA link failures. If the bandwidth is
reduced, the rate of test cells which can be handled by the
connection will also be reduced.
If this attribute is set to no, the Test application signals to the
connection that the bandwidth for this connection must be
maintained at the requested level. If the connection cannot maintain
the full bandwidth, the connection may be released (cleared) based
on the holding priority of the connection.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccTestBandwidthElastic OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the connection (VCC) should be configured with elastic bandwidth or not. Elastic bandwidth is of importance in conjuction with IMA links, where some links fail and the resulting bandwidth is less than the requested bandwidth for all connections. In that case, some connections may be reduced in bandwidth based on the setting of the bwElastic attribute. If this attribute is set to yes, the Test application signals to the connection that the bandwidth for this connection is elastic, and may be reduced in the case of IMA link failures. If the bandwidth is reduced, the rate of test cells which can be handled by the connection will also be reduced. If this attribute is set to no, the Test application signals to the connection that the bandwidth for this connection must be maintained at the requested level. If the connection cannot maintain the full bandwidth, the connection may be released (cleared) based on the holding priority of the connection." DEFVAL { no } ::= { mscAtmIfVccTestSetupEntry 60 }
mscAtmIfVccTestBandwidthElastic OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the connection (VCC) should be configured with elastic bandwidth or not. Elastic bandwidth is of importance in conjuction with IMA links, where some links fail and the resulting bandwidth is less than the requested bandwidth for all connections. In that case, some connections may be reduced in bandwidth based on the setting of the bwElastic attribute. If this attribute is set to yes, the Test application signals to the connection that the bandwidth for this connection is elastic, and may be reduced in the case of IMA link failures. If the bandwidth is reduced, the rate of test cells which can be handled by the connection will also be reduced. If this attribute is set to no, the Test application signals to the connection that the bandwidth for this connection must be maintained at the requested level. If the connection cannot maintain the full bandwidth, the connection may be released (cleared) based on the holding priority of the connection." DEFVAL { no } ::= { mscAtmIfVccTestSetupEntry 60 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.10 | mscAtmIfVccTestFrmTypes | 0 | 0 | This attribute specifies the types of the test frames to be transmitted during the ATM connection test. It must contain at least… |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.20 | mscAtmIfVccTestFrmSize | 0 | 0 | This attribute defines the size of the test frames used in an ATM connection test. |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.30 | mscAtmIfVccTestFrmPatternType | 0 | 0 | This attribute specifies the bit sequence used to fill the frames used in the ATM connection test. It must contain one of the fo… |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.40 | mscAtmIfVccTestCustomizedPattern | 0 | 0 | This attribute specifies a 32 bit sequence to be used to fill frames when the framePatternType attribute is set to customizedPat… |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.50 | mscAtmIfVccTestDuration | 0 | 0 | This attribute specifies the maximum number of minutes that the ATM connection test is allowed to run. The maximum allowed value … |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.70 | mscAtmIfVccTestOverrideHoldingPriority | 0 | 0 | This attribute specifies the override holding priority which should be signalled to the VCC connection at the start of the test.… |