This attribute specifies the override holding priority which should
be signalled to the VCC connection at the start of the test. Holding
priority is of importance in conjuction with IMA links, where some
links fail and the resulting bandwidth is less than the requested
bandwidth for all connections. In that case, some connections may
be released based on the connection's holding priority.
Zero (0) is thie highest holding priority, and four (4) is the lowest
priority. A setting of zero to four overrides whatever holding
priority that has been configured at the connection (VCC). A setting
of noOverride means that the connection should use its internally
configured holding priority.
Parsed from file nortelPC-atmCoreV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
This attribute specifies the override holding priority which should
be signalled to the VCC connection at the start of the test. Holding
priority is of importance in conjuction with IMA links, where some
links fail and the resulting bandwidth is less than the requested
bandwidth for all connections. In that case, some connections may
be released based on the connection's holding priority.
Zero (0) is thie highest holding priority, and four (4) is the lowest
priority. A setting of zero to four overrides whatever holding
priority that has been configured at the connection (VCC). A setting
of noOverride means that the connection should use its internally
configured holding priority.
Parsed from file Nortel-MsCarrier-MscPassport-AtmCoreMIB.mib
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-AtmCoreMIB
[Automatically extracted from oidview.com]
mscAtmIfVccTestOverrideHoldingPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4), noOverride(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the override holding priority which should be signalled to the VCC connection at the start of the test. Holding priority is of importance in conjuction with IMA links, where some links fail and the resulting bandwidth is less than the requested bandwidth for all connections. In that case, some connections may be released based on the connection's holding priority. Zero (0) is thie highest holding priority, and four (4) is the lowest priority. A setting of zero to four overrides whatever holding priority that has been configured at the connection (VCC). A setting of noOverride means that the connection should use its internally configured holding priority." DEFVAL { noOverride } ::= { mscAtmIfVccTestSetupEntry 70 }
mscAtmIfVccTestOverrideHoldingPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4), noOverride(6) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the override holding priority which should be signalled to the VCC connection at the start of the test. Holding priority is of importance in conjuction with IMA links, where some links fail and the resulting bandwidth is less than the requested bandwidth for all connections. In that case, some connections may be released based on the connection's holding priority. Zero (0) is thie highest holding priority, and four (4) is the lowest priority. A setting of zero to four overrides whatever holding priority that has been configured at the connection (VCC). A setting of noOverride means that the connection should use its internally configured holding priority." DEFVAL { noOverride } ::= { mscAtmIfVccTestSetupEntry 70 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.10 | mscAtmIfVccTestFrmTypes | 0 | 0 | This attribute specifies the types of the test frames to be transmitted during the ATM connection test. It must contain at least… |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.20 | mscAtmIfVccTestFrmSize | 0 | 0 | This attribute defines the size of the test frames used in an ATM connection test. |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.30 | mscAtmIfVccTestFrmPatternType | 0 | 0 | This attribute specifies the bit sequence used to fill the frames used in the ATM connection test. It must contain one of the fo… |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.40 | mscAtmIfVccTestCustomizedPattern | 0 | 0 | This attribute specifies a 32 bit sequence to be used to fill frames when the framePatternType attribute is set to customizedPat… |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.50 | mscAtmIfVccTestDuration | 0 | 0 | This attribute specifies the maximum number of minutes that the ATM connection test is allowed to run. The maximum allowed value … |
| 1.3.6.1.4.1.562.36.2.1.114.5.6.110.1.60 | mscAtmIfVccTestBandwidthElastic | 0 | 0 | This attribute specifies whether the connection (VCC) should be configured with elastic bandwidth or not. Elastic bandwidth is o… |