This attribute indicates whether a Physical AIS alarm state is
entered. A Physical AIS alarm state is entered when a Physical AIS
defect is observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. A Physical AIS defect is declared when the incoming
signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If
the physical AIS defects are intermittently occurring, the physical
AIS defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
A Physical AIS alarm is cleared when the Physical AIS defect is
absent for a period of 10 seconds +/- 0.5 seconds. The port goes
into an operationalState of disabled until the AIS alarm condition is
cleared. While the port is in the Physical AIS alarm state, the node
also transmits the far-end RAI defect indicator on the out-going JT2
line.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute indicates whether a Physical AIS alarm state is
entered. A Physical AIS alarm state is entered when a Physical AIS
defect is observed and accumulated for a period of 2.5 seconds +/-
0.5 seconds. A Physical AIS defect is declared when the incoming
signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If
the physical AIS defects are intermittently occurring, the physical
AIS defect accumulator is decremented at a rate of 1/10 of the
incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
A Physical AIS alarm is cleared when the Physical AIS defect is
absent for a period of 10 seconds +/- 0.5 seconds. The port goes
into an operationalState of disabled until the AIS alarm condition is
cleared. While the port is in the Physical AIS alarm state, the node
also transmits the far-end RAI defect indicator on the out-going JT2
line.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpJT2RxAisPhysicalAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line." DEFVAL { off } ::= { mscLpJT2OperEntry 3 }
mscLpJT2RxAisPhysicalAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AIS defect is observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds. A Physical AIS defect is declared when the incoming signal has two or less zeros in a sequence of 3,156 bits (0.5 ms). If the physical AIS defects are intermittently occurring, the physical AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. A Physical AIS alarm is cleared when the Physical AIS defect is absent for a period of 10 seconds +/- 0.5 seconds. The port goes into an operationalState of disabled until the AIS alarm condition is cleared. While the port is in the Physical AIS alarm state, the node also transmits the far-end RAI defect indicator on the out-going JT2 line." DEFVAL { off } ::= { mscLpJT2OperEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.1 | mscLpJT2LosAlarm | 0 | 0 | This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects ha… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.2 | mscLpJT2LofAlarm | 0 | 0 | This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.4 | mscLpJT2RxAisPayloadAlarm | 0 | 0 | This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS de… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.5 | mscLpJT2RxRaiAlarm | 0 | 0 | This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signa… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.6 | mscLpJT2TxAisPhysicalAlarm | 0 | 0 | This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.7 | mscLpJT2TxRaiAlarm | 0 | 0 | This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern… |