This attribute indicates whether an AIS (Alarm Indication Signal)
alarm is being transmitted on the outgoing JT2 line. Currently the
JT2 port only transmits a Physical AIS (no Payload AIS) on the
outgoing JT2 line.
Since there is no Idle signal defined for JT2, the AIS signal is
transmitted when the JT2 port is in the operationalState of locked.
The AIS signal may also be transmitted for diagnostic testing.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute indicates whether an AIS (Alarm Indication Signal)
alarm is being transmitted on the outgoing JT2 line. Currently the
JT2 port only transmits a Physical AIS (no Payload AIS) on the
outgoing JT2 line.
Since there is no Idle signal defined for JT2, the AIS signal is
transmitted when the JT2 port is in the operationalState of locked.
The AIS signal may also be transmitted for diagnostic testing.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpJT2TxAisPhysicalAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing." DEFVAL { off } ::= { mscLpJT2OperEntry 6 }
mscLpJT2TxAisPhysicalAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the outgoing JT2 line. Currently the JT2 port only transmits a Physical AIS (no Payload AIS) on the outgoing JT2 line. Since there is no Idle signal defined for JT2, the AIS signal is transmitted when the JT2 port is in the operationalState of locked. The AIS signal may also be transmitted for diagnostic testing." DEFVAL { off } ::= { mscLpJT2OperEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.1 | mscLpJT2LosAlarm | 0 | 0 | This attribute displays whether a LOS (Loss of Signal) alarm state is entered. An LOS alarm state is entered when LOS defects ha… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.2 | mscLpJT2LofAlarm | 0 | 0 | This attribute indicates whether a LOF (Loss of Frame) alarm state is entered. A LOF alarm state is entered when LOF defects are… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.3 | mscLpJT2RxAisPhysicalAlarm | 0 | 0 | This attribute indicates whether a Physical AIS alarm state is entered. A Physical AIS alarm state is entered when a Physical AI… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.4 | mscLpJT2RxAisPayloadAlarm | 0 | 0 | This attribute indicates whether a Payload AIS alarm state is entered. A Payload AIS alarm state is entered when a Payload AIS de… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.5 | mscLpJT2RxRaiAlarm | 0 | 0 | This attribute indicates whether a Received RAI alarm state is entered. A received RAI alarm state is entered when the RAI signa… |
| 1.3.6.1.4.1.562.36.2.1.12.16.15.1.7 | mscLpJT2TxRaiAlarm | 0 | 0 | This attribute indicates whether an RAI defect indication pattern is being sent on the out-going JT2 line. The RAI alarm pattern… |