This attribute indicates whether a LOS (Loss of Signal) alarm state
has been entered. A LOS alarm is declared after LOS defects have
been observed and accumulated for a period of 2 seconds +/- 0.5
second . A LOS defect is detected upon observing all zeros for 150
ms . If the LOS defects are intermittently occurring, the LOS defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The port goes into an operational state of disabled until the LOS
alarm state is cleared. The LOS alarm state is cleared when LOS
defects are absent for 10 seconds +/- 0.5 second.
Parsed from file nortelPC-externalTimingDS1V1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
This attribute indicates whether a LOS (Loss of Signal) alarm state
has been entered. A LOS alarm is declared after LOS defects have
been observed and accumulated for a period of 2 seconds +/- 0.5
second . A LOS defect is detected upon observing all zeros for 150
ms . If the LOS defects are intermittently occurring, the LOS defect
accumulator is decremented at a rate of 1/10 of the incrementing
rate (alarm integration ratio of 1/10), with all measurements based
on a 200 ms polling cycle.
The port goes into an operational state of disabled until the LOS
alarm state is cleared. The LOS alarm state is cleared when LOS
defects are absent for 10 seconds +/- 0.5 second.
Parsed from file Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB.mib
Module: Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
[Automatically extracted from oidview.com]
mscLpEDS1LosAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 second . A LOS defect is detected upon observing all zeros for 150 ms . If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 second." DEFVAL { off } ::= { mscLpEDS1OperEntry 1 }
mscLpEDS1LosAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects have been observed and accumulated for a period of 2 seconds +/- 0.5 second . A LOS defect is detected upon observing all zeros for 150 ms . If the LOS defects are intermittently occurring, the LOS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The port goes into an operational state of disabled until the LOS alarm state is cleared. The LOS alarm state is cleared when LOS defects are absent for 10 seconds +/- 0.5 second." DEFVAL { off } ::= { mscLpEDS1OperEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.28.16.1.2 | mscLpEDS1LofAlarm | 0 | 0 | This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF def… |
| 1.3.6.1.4.1.562.36.2.1.12.28.16.1.3 | mscLpEDS1RxAisAlarm | 0 | 0 | This attribute indicates whether an AIS (Alarm Indication Signal) alarm has been entered. The AIS Alarm state is entered when AI… |