This attribute indicates whether an AIS (Alarm Indication Signal)
alarm has been entered. The AIS Alarm state is entered when AIS
defects have been observed and accumulated for 2.5 seconds +/- 0.5
second. An AIS defect is detected after having received less than 3
zeros in a 2048 bit period. If the AIS defects are intermittently
occurring, the AIS defect accumulator is decremented at a rate of 1/
10 of the incrementing rate (alarm integration ratio of 1/10), with all
measurement based on a 200 ms polling cycle. The port goes into
an operational state of disabled for the duration of an AIS alarm
state. The AIS alarm state is cleared when AIS defects are absent
for 10 seconds +/- 0.5 second.
Parsed from file nortelPC-externalTimingDS1V1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
This attribute indicates whether an AIS (Alarm Indication Signal)
alarm has been entered. The AIS Alarm state is entered when AIS
defects have been observed and accumulated for 2.5 seconds +/- 0.5
second. An AIS defect is detected after having received less than 3
zeros in a 2048 bit period. If the AIS defects are intermittently
occurring, the AIS defect accumulator is decremented at a rate of 1/
10 of the incrementing rate (alarm integration ratio of 1/10), with all
measurement based on a 200 ms polling cycle. The port goes into
an operational state of disabled for the duration of an AIS alarm
state. The AIS alarm state is cleared when AIS defects are absent
for 10 seconds +/- 0.5 second.
Parsed from file Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB.mib
Module: Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-ExternalTimingDS1MIB
[Automatically extracted from oidview.com]
mscLpEDS1RxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether an AIS (Alarm Indication Signal) alarm has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 second. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurement based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 second." DEFVAL { off } ::= { mscLpEDS1OperEntry 3 }
mscLpEDS1RxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether an AIS (Alarm Indication Signal) alarm has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 second. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurement based on a 200 ms polling cycle. The port goes into an operational state of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 second." DEFVAL { off } ::= { mscLpEDS1OperEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.28.16.1.1 | mscLpEDS1LosAlarm | 0 | 0 | This attribute indicates whether a LOS (Loss of Signal) alarm state has been entered. A LOS alarm is declared after LOS defects … |
| 1.3.6.1.4.1.562.36.2.1.12.28.16.1.2 | mscLpEDS1LofAlarm | 0 | 0 | This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF def… |