This attribute indicates whether an AIS (Alarm Indication Signal)
alarm state has been entered. The AIS Alarm state is entered when
AIS defects have been observed and accumulated for 2.5 seconds
+/- 0.5 seconds. An AIS defect is detected after having received less
than 3 zeros in a 2048 bit period. If the AIS defects are
intermittently occurring, the AIS defect accumulator is decremented
at a rate of 1/10 of the incrementing rate (alarm integration ratio of
1/10), with all measurements based on a 200 ms polling cycle. This
tributary goes into an operationalState of disabled for the duration
of an AIS alarm state.
The AIS alarm state is cleared when AIS defects are absent for 10
seconds +/- 0.5 seconds.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute indicates whether an AIS (Alarm Indication Signal)
alarm state has been entered. The AIS Alarm state is entered when
AIS defects have been observed and accumulated for 2.5 seconds
+/- 0.5 seconds. An AIS defect is detected after having received less
than 3 zeros in a 2048 bit period. If the AIS defects are
intermittently occurring, the AIS defect accumulator is decremented
at a rate of 1/10 of the incrementing rate (alarm integration ratio of
1/10), with all measurements based on a 200 ms polling cycle. This
tributary goes into an operationalState of disabled for the duration
of an AIS alarm state.
The AIS alarm state is cleared when AIS defects are absent for 10
seconds +/- 0.5 seconds.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpDS3DS1RxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds." DEFVAL { off } ::= { mscLpDS3DS1OperEntry 1 }
mscLpDS3DS1RxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether an AIS (Alarm Indication Signal) alarm state has been entered. The AIS Alarm state is entered when AIS defects have been observed and accumulated for 2.5 seconds +/- 0.5 seconds. An AIS defect is detected after having received less than 3 zeros in a 2048 bit period. If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. This tributary goes into an operationalState of disabled for the duration of an AIS alarm state. The AIS alarm state is cleared when AIS defects are absent for 10 seconds +/- 0.5 seconds." DEFVAL { off } ::= { mscLpDS3DS1OperEntry 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.2 | mscLpDS3DS1LofAlarm | 0 | 0 | This attribute indicates whether a LOF (Loss of Frame) alarm state has been entered. The LOF alarm state is entered when LOF def… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.3 | mscLpDS3DS1RxRaiAlarm | 0 | 0 | This attribute indicates whether an RAI (Remote Alarm Indication) alarm state has been entered. An RAI alarm state is entered wh… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.4 | mscLpDS3DS1TxAisAlarm | 0 | 0 | This attribute indicates whether an AIS (Alarm Indication Signal) alarm is being transmitted on the line. An AIS alarm is transm… |
| 1.3.6.1.4.1.562.36.2.1.12.5.6.16.1.5 | mscLpDS3DS1TxRaiAlarm | 0 | 0 | This attribute indicates whether a RAI signal is being sent on the outgoing line. The RAI signal is transmitted when the tributa… |