This attribute displays whether an Alarm Indication Signal (AIS)
alarm when state has been entered. An AIS alarm state is entered
when AIS defects have been observed and accumulated for a period
of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS
defect is the occurrence of the AIS (unframed signal with a density
of zeros below a certain threshold such as defined by ITU
Recommendation G.775). If the AIS defects are intermittently
occurring, the AIS defect accumulator is decremented at a rate of 1/
10 of the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The E3 component goes into an operational state of disabled until
the AIS alarm condition is cleared (after AIS has been no longer
detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS
is detected on the incoming line, the node also transmits the far-end
SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over
the outgoing line. The txRai attribute is set to on when transmitting
the far-end SEF/AIS defect indicator on the outgoing line.
The rxAisAlarm attribute is always set to off when the component
has been locked and left offline.
Parsed from file nortelPC-logicalProcessorV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
This attribute displays whether an Alarm Indication Signal (AIS)
alarm when state has been entered. An AIS alarm state is entered
when AIS defects have been observed and accumulated for a period
of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS
defect is the occurrence of the AIS (unframed signal with a density
of zeros below a certain threshold such as defined by ITU
Recommendation G.775). If the AIS defects are intermittently
occurring, the AIS defect accumulator is decremented at a rate of 1/
10 of the incrementing rate (alarm integration ratio of 1/10), with all
measurements based on a 200 ms polling cycle.
The E3 component goes into an operational state of disabled until
the AIS alarm condition is cleared (after AIS has been no longer
detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS
is detected on the incoming line, the node also transmits the far-end
SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over
the outgoing line. The txRai attribute is set to on when transmitting
the far-end SEF/AIS defect indicator on the outgoing line.
The rxAisAlarm attribute is always set to off when the component
has been locked and left offline.
Parsed from file Nortel-MsCarrier-MscPassport-LogicalProcessorMIB.mib
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-LogicalProcessorMIB
[Automatically extracted from oidview.com]
mscLpE3RxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline." DEFVAL { off } ::= { mscLpE3OperEntry 3 }
mscLpE3RxAisAlarm OBJECT-TYPE SYNTAX INTEGER { on(0), off(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether an Alarm Indication Signal (AIS) alarm when state has been entered. An AIS alarm state is entered when AIS defects have been observed and accumulated for a period of 2.5 seconds +/- 0.5 seconds on the incoming E3 line. An AIS defect is the occurrence of the AIS (unframed signal with a density of zeros below a certain threshold such as defined by ITU Recommendation G.775). If the AIS defects are intermittently occurring, the AIS defect accumulator is decremented at a rate of 1/ 10 of the incrementing rate (alarm integration ratio of 1/10), with all measurements based on a 200 ms polling cycle. The E3 component goes into an operational state of disabled until the AIS alarm condition is cleared (after AIS has been no longer detected for a period of 10 seconds +/- 0.5 seconds). As long as AIS is detected on the incoming line, the node also transmits the far-end SEF/AIS (in G.751 E3) or FERF (in G.832) defect indicator over the outgoing line. The txRai attribute is set to on when transmitting the far-end SEF/AIS defect indicator on the outgoing line. The rxAisAlarm attribute is always set to off when the component has been locked and left offline." DEFVAL { off } ::= { mscLpE3OperEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.1 | mscLpE3LosAlarm | 0 | 0 | This attribute displays whether a Loss Of Signal (LOS) alarm state has been entered. An LOS alarm state is entered when LOS defe… |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.2 | mscLpE3LofAlarm | 0 | 0 | This attribute displays whether a Loss Of Frame (LOF) alarm state has been entered. An LOF alarm state is entered when Severely E… |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.4 | mscLpE3RxRaiAlarm | 0 | 0 | This attribute displays whether a Remote Alarm Indication (RAI) alarm state has been entered. A RAI alarm state is entered when … |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.5 | mscLpE3TxAis | 0 | 0 | This attribute displays whether an AIS alarm is being transmitted on the E3 line. AIS is transmitted on the outgoing line when t… |
| 1.3.6.1.4.1.562.36.2.1.12.6.16.1.6 | mscLpE3TxRai | 0 | 0 | This attribute displays whether the far-end SEF/AIS defect indicator is transmitted over the outgoing line when the E3 component… |