This attribute specifies the gain in dB that is applied to data coming
from outside the network before it is transferred across the network.
It applies to voice, modem and fax traffic. For example, ingress gain
is applied to audio data coming from a PBX. If ingressAudioGain is
negative, a loss is applied.
If this voice service is running on a DS1V, E1V, 1pDS1V, 1pE1V or
J2MV card, ingressAudioGain must be set to 0. If this voice service
is running on any other cardtype, ingressAudioGain can be set to
any integral value from -12 to +12.
ingressAudioGain and egressAudioGain are used in loss planning,
which is the configuration of the devices in the network to ensure
that the signal level from any point in the network to any other point
is correct.
Parsed from file nortelPC-voiceV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-VoiceMIB
This attribute specifies the gain in dB that is applied to data coming
from outside the network before it is transferred across the network.
It applies to voice, modem and fax traffic. For example, ingress gain
is applied to audio data coming from a PBX. If ingressAudioGain is
negative, a loss is applied.
If this voice service is running on a DS1V, E1V, 1pDS1V, 1pE1V or
J2MV card, ingressAudioGain must be set to 0. If this voice service
is running on any other cardtype, ingressAudioGain can be set to
any integral value from -12 to +12.
ingressAudioGain and egressAudioGain are used in loss planning,
which is the configuration of the devices in the network to ensure
that the signal level from any point in the network to any other point
is correct.
Parsed from file Nortel-MsCarrier-MscPassport-VoiceMIB.mib
Module: Nortel-MsCarrier-MscPassport-VoiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-VoiceMIB
[Automatically extracted from oidview.com]
mscVsFramerIngressAudioGain OBJECT-TYPE SYNTAX INTEGER (-12..12) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voice, modem and fax traffic. For example, ingress gain is applied to audio data coming from a PBX. If ingressAudioGain is negative, a loss is applied. If this voice service is running on a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card, ingressAudioGain must be set to 0. If this voice service is running on any other cardtype, ingressAudioGain can be set to any integral value from -12 to +12. ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in the network to ensure that the signal level from any point in the network to any other point is correct." DEFVAL { 0 } ::= { mscVsFramerCoderEntry 18 }
mscVsFramerIngressAudioGain OBJECT-TYPE SYNTAX INTEGER (-12..12) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voice, modem and fax traffic. For example, ingress gain is applied to audio data coming from a PBX. If ingressAudioGain is negative, a loss is applied. If this voice service is running on a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card, ingressAudioGain must be set to 0. If this voice service is running on any other cardtype, ingressAudioGain can be set to any integral value from -12 to +12. ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in the network to ensure that the signal level from any point in the network to any other point is correct." DEFVAL { 0 } ::= { mscVsFramerCoderEntry 18 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.1 | mscVsFramerMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum desired ingress bit rate used during voice traffic when voiceEncoding is g711G726. The nego… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.2 | mscVsFramerMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum desired ingress bit rate used during voice traffic when voiceEncoding is g711G726. The nego… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.3 | mscVsFramerMaxModemBitRate | 0 | 0 | This attribute specifies the maximum desired ingress rate used during modemFax and/or fax traffic. Voice traffic is all traffic … |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.4 | mscVsFramerMinModemBitRate | 0 | 0 | This attribute specifies the minimum desired ingress rate used during modemFax and/or fax traffic. Voice traffic is all traffic … |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.5 | mscVsFramerAudioGain | 0 | 0 | This attribute has been migrated to egressAudioGain. |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.6 | mscVsFramerSilenceSuppression | 0 | 0 | This attribute specifies when ingress silence suppression is desired during voice traffic. If silenceSuppression is off, silence… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.7 | mscVsFramerEchoCancellation | 0 | 0 | This attribute specifies whether echo cancellation is performed on this VoiceService. If echoCancellation is on, the internal ec… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.9 | mscVsFramerALawConversion | 0 | 0 | This attribute specifies whether mu-law to A-law PCM conversion is performed. aLawConversion only needs to be set to on when thi… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.11 | mscVsFramerVoiceEncoding | 0 | 0 | This attribute specifies how ingress voice traffic is encoded. If voiceEncoding is g711G726, ingress voice traffic is encoded us… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.12 | mscVsFramerFaxEncoding | 0 | 0 | This attribute specifies how ingress modemFax and fax traffic are encoded. Voice traffic is all traffic from the start of a call… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.13 | mscVsFramerTandemPassThrough | 0 | 0 | This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.14 | mscVsFramerInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.15 | mscVsFramerEgressAudioGain | 0 | 0 | This attribute has been migrated to ingressAudioGain. |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.16 | mscVsFramerFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies whether ingress fax idle suppression is desired during G.711 and G.726 fax traffic. It applies only if m… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.17 | mscVsFramerEndOfCallPattern | 0 | 0 | This attribute specifies the pattern that indicates the end of a CCS call. The pattern is specified as a hexadecimal byte. If th… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.19 | mscVsFramerEgressGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data before it leaves the network. It applies to voice, modem and fax… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.20 | mscVsFramerComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.21 | mscVsFramerEchoTailDelay | 0 | 0 | This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the r… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.22 | mscVsFramerEchoReturnLoss | 0 | 0 | This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.34 | mscVsFramerDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.35 | mscVsFramerSpeechHangoverTime | 0 | 0 | This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. I… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.36 | mscVsFramerFaxHangoverTimeG711G726 | 0 | 0 | This attribute specifies the time after the end of fax traffic before ingress G.711/G.726 fax idle suppression starts. It applie… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.37 | mscVsFramerModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this VoiceService differentiates modemFax traffic and speech. If modemFaxSpeechDiscrim is on and… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.39 | mscVsFramerV17EncodedAsG711G726 | 0 | 0 | This attribute specifies the desired negotiation between this VoiceService and V.17 fax machines when modemFaxEncoding is faxRela… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.40 | mscVsFramerEcanBypassMode | 0 | 0 | This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceService. This attribute… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.41 | mscVsFramerMaxFaxRelayRate | 0 | 0 | This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or f… |