This attribute specifies the time after the end of speech before
silence suppression starts. It applies only to voice traffic. It is not
used unless negotiatedIgSilenceSuppression is on, congested or
slowAndCongested.
Higher values of speechHangoverTime reduce undesirable clipping
but increase bandwidth usage.
speechHangoverTime is not used if this VoiceService is running on
a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card.
Parsed from file nortelPC-voiceV1.mib.txt
Company: None
Module: Nortel-MsCarrier-MscPassport-VoiceMIB
This attribute specifies the time after the end of speech before
silence suppression starts. It applies only to voice traffic. It is not
used unless negotiatedIgSilenceSuppression is on, congested or
slowAndCongested.
Higher values of speechHangoverTime reduce undesirable clipping
but increase bandwidth usage.
speechHangoverTime is not used if this VoiceService is running on
a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card.
Parsed from file Nortel-MsCarrier-MscPassport-VoiceMIB.mib
Module: Nortel-MsCarrier-MscPassport-VoiceMIB
Vendor: Northern Telecom, Ltd.
Module: Nortel-MsCarrier-MscPassport-VoiceMIB
[Automatically extracted from oidview.com]
mscVsFramerSpeechHangoverTime OBJECT-TYPE SYNTAX INTEGER (10..500) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. It is not used unless negotiatedIgSilenceSuppression is on, congested or slowAndCongested. Higher values of speechHangoverTime reduce undesirable clipping but increase bandwidth usage. speechHangoverTime is not used if this VoiceService is running on a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card." DEFVAL { 150 } ::= { mscVsFramerCoderEntry 35 }
mscVsFramerSpeechHangoverTime OBJECT-TYPE SYNTAX INTEGER (10..500) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. It is not used unless negotiatedIgSilenceSuppression is on, congested or slowAndCongested. Higher values of speechHangoverTime reduce undesirable clipping but increase bandwidth usage. speechHangoverTime is not used if this VoiceService is running on a DS1V, E1V, 1pDS1V, 1pE1V or J2MV card." DEFVAL { 150 } ::= { mscVsFramerCoderEntry 35 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.1 | mscVsFramerMaxVoiceBitRate | 0 | 0 | This attribute specifies the maximum desired ingress bit rate used during voice traffic when voiceEncoding is g711G726. The nego… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.2 | mscVsFramerMinVoiceBitRate | 0 | 0 | This attribute specifies the minimum desired ingress bit rate used during voice traffic when voiceEncoding is g711G726. The nego… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.3 | mscVsFramerMaxModemBitRate | 0 | 0 | This attribute specifies the maximum desired ingress rate used during modemFax and/or fax traffic. Voice traffic is all traffic … |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.4 | mscVsFramerMinModemBitRate | 0 | 0 | This attribute specifies the minimum desired ingress rate used during modemFax and/or fax traffic. Voice traffic is all traffic … |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.5 | mscVsFramerAudioGain | 0 | 0 | This attribute has been migrated to egressAudioGain. |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.6 | mscVsFramerSilenceSuppression | 0 | 0 | This attribute specifies when ingress silence suppression is desired during voice traffic. If silenceSuppression is off, silence… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.7 | mscVsFramerEchoCancellation | 0 | 0 | This attribute specifies whether echo cancellation is performed on this VoiceService. If echoCancellation is on, the internal ec… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.9 | mscVsFramerALawConversion | 0 | 0 | This attribute specifies whether mu-law to A-law PCM conversion is performed. aLawConversion only needs to be set to on when thi… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.11 | mscVsFramerVoiceEncoding | 0 | 0 | This attribute specifies how ingress voice traffic is encoded. If voiceEncoding is g711G726, ingress voice traffic is encoded us… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.12 | mscVsFramerFaxEncoding | 0 | 0 | This attribute specifies how ingress modemFax and fax traffic are encoded. Voice traffic is all traffic from the start of a call… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.13 | mscVsFramerTandemPassThrough | 0 | 0 | This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.14 | mscVsFramerInsertedOutputDelay | 0 | 0 | This attribute specifies the amount of added output delay used to compensate for cross network delay variations. It applies to v… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.15 | mscVsFramerEgressAudioGain | 0 | 0 | This attribute has been migrated to ingressAudioGain. |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.16 | mscVsFramerFaxIdleSuppressionG711G726 | 0 | 0 | This attribute specifies whether ingress fax idle suppression is desired during G.711 and G.726 fax traffic. It applies only if m… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.17 | mscVsFramerEndOfCallPattern | 0 | 0 | This attribute specifies the pattern that indicates the end of a CCS call. The pattern is specified as a hexadecimal byte. If th… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.18 | mscVsFramerIngressAudioGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across … |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.19 | mscVsFramerEgressGain | 0 | 0 | This attribute specifies the gain in dB that is applied to data before it leaves the network. It applies to voice, modem and fax… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.20 | mscVsFramerComfortNoiseCap | 0 | 0 | This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap … |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.21 | mscVsFramerEchoTailDelay | 0 | 0 | This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the r… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.22 | mscVsFramerEchoReturnLoss | 0 | 0 | This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.34 | mscVsFramerDtmfRegeneration | 0 | 0 | This attribute specifies the DTMF regeneration parameter used during negotiation with the remote end across the subnet. If dtmfR… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.36 | mscVsFramerFaxHangoverTimeG711G726 | 0 | 0 | This attribute specifies the time after the end of fax traffic before ingress G.711/G.726 fax idle suppression starts. It applie… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.37 | mscVsFramerModemFaxSpeechDiscrim | 0 | 0 | This attribute specifies whether this VoiceService differentiates modemFax traffic and speech. If modemFaxSpeechDiscrim is on and… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.39 | mscVsFramerV17EncodedAsG711G726 | 0 | 0 | This attribute specifies the desired negotiation between this VoiceService and V.17 fax machines when modemFaxEncoding is faxRela… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.40 | mscVsFramerEcanBypassMode | 0 | 0 | This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceService. This attribute… |
| 1.3.6.1.4.1.562.36.2.1.80.2.12.1.41 | mscVsFramerMaxFaxRelayRate | 0 | 0 | This attribute specifies the maximum desired fax relay rate. This attribute only applies if modemFaxEncoding is faxRelayOnly or f… |