This object provides a mechanism for controlling the status
of the equipment. Its value is a bitmap of controls that
determine the value of adnEquipX731Admin. A value of
0 indicates that none of the status controls are in effect.
bit
value meaning
1 suspend - put card (except control unit (CU)) in
permanent reset
2 coldRestart - restart equipment, interrupting service
- node and card (except CU) on HSS; node, card
and interface on TPX
4 mildRestart - restart equipment, and do not interrupt
service - only for active or standby CU card
32 initiateTest - begin test - standby CU card only
64 manualSwitchover - switch to backup - primary MSC,
CIG, and BBASE cards and active CU cards only
128 manualSwitchback - switch to primary - primary MSC,
CIG, and BBASE cards only
256 osRebuild - all firmware and disk contents are copied
fromthe active CU card - standby CU card only
The following bit values are deprecated:
value meaning
8 debugModeAfterCrash (do not reload operational
code after crash and allow viewing of
card's data structures)
16 reserveForTest
Parsed from file hss1100adn.mib.txt
Company: None
Module: ADN-MIB
This object provides a mechanism for controlling the status
of the equipment. Its value is a bitmap of controls that
determine the value of adnEquipX731Admin. A value of
0 indicates that none of the status controls are in effect.
bit
value meaning
1 suspend - put card (except control unit (CU)) in
permanent reset
2 coldRestart - restart equipment, interrupting service
- node and card (except CU) on HSS; node, card
and interface on TPX
4 mildRestart - restart equipment, and do not interrupt
service - only for active or standby CU card
32 initiateTest - begin test - standby CU card only
64 manualSwitchover - switch to backup - primary MSC,
CIG, and BBASE cards and active CU cards only
128 manualSwitchback - switch to primary - primary MSC,
CIG, and BBASE cards only
256 osRebuild - all firmware and disk contents are copied
fromthe active CU card - standby CU card only
The following bit values are deprecated:
value meaning
8 debugModeAfterCrash (do not reload operational
code after crash and allow viewing of
card's data structures)
16 reserveForTest
Parsed from file ADN-MIB.mib
Module: ADN-MIB
Vendor: Alcatel-Lucent (previously was 'Alcatel Data Network')
Module: ADN-MIB
[Automatically extracted from oidview.com]
adnEquipControlStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object provides a mechanism for controlling the status of the equipment. Its value is a bitmap of controls that determine the value of adnEquipX731Admin. A value of 0 indicates that none of the status controls are in effect. bit value meaning 1 suspend - put card (except control unit (CU)) in permanent reset 2 coldRestart - restart equipment, interrupting service - node and card (except CU) on HSS; node, card and interface on TPX 4 mildRestart - restart equipment, and do not interrupt service - only for active or standby CU card 32 initiateTest - begin test - standby CU card only 64 manualSwitchover - switch to backup - primary MSC, CIG, and BBASE cards and active CU cards only 128 manualSwitchback - switch to primary - primary MSC, CIG, and BBASE cards only 256 osRebuild - all firmware and disk contents are copied fromthe active CU card - standby CU card only The following bit values are deprecated: value meaning 8 debugModeAfterCrash (do not reload operational code after crash and allow viewing of card's data structures) 16 reserveForTest " ::= { adnEquipEntry 12 }
adnEquipControlStatus OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object provides a mechanism for controlling the status of the equipment. Its value is a bitmap of controls that determine the value of adnEquipX731Admin. A value of 0 indicates that none of the status controls are in effect. bit value meaning 1 suspend - put card (except control unit (CU)) in permanent reset 2 coldRestart - restart equipment, interrupting service - node and card (except CU) on HSS; node, card and interface on TPX 4 mildRestart - restart equipment, and do not interrupt service - only for active or standby CU card 32 initiateTest - begin test - standby CU card only 64 manualSwitchover - switch to backup - primary MSC, CIG, and BBASE cards and active CU cards only 128 manualSwitchback - switch to primary - primary MSC, CIG, and BBASE cards only 256 osRebuild - all firmware and disk contents are copied fromthe active CU card - standby CU card only The following bit values are deprecated: value meaning 8 debugModeAfterCrash (do not reload operational code after crash and allow viewing of card's data structures) 16 reserveForTest " ::= { adnEquipEntry 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.637.3.1.5.1.1.1 | adnEquipType | 0 | 0 | The type of component this entry represents. 1 - other 5 - chassis 2 - node 6 - processor 3 - card … |
1.3.6.1.4.1.637.3.1.5.1.1.2 | adnEquipIndex | 0 | 0 | The index of the component this entry represents. |
1.3.6.1.4.1.637.3.1.5.1.1.3 | adnEquipSubType | 0 | 0 | A more specific indication of the type of component this entry represents. For example, when adnEquipType is 'card' adnEquipSubTy… |
1.3.6.1.4.1.637.3.1.5.1.1.4 | adnEquipLastChange | 0 | 0 | The value of sysUpTime at the time the component entered its current operational state. If the current state was entered prior t… |
1.3.6.1.4.1.637.3.1.5.1.1.5 | adnEquipInitTime | 0 | 0 | The time the component initialized with respect to the initialization of the local network management subsystem measured in hundr… |
1.3.6.1.4.1.637.3.1.5.1.1.6 | adnEquipTrapEnableMask | 0 | 0 | The value of this object is a bitmap that indicates which states and statuses should cause an adnEquipStatusChange trap to be sen… |
1.3.6.1.4.1.637.3.1.5.1.1.7 | adnEquipX731Oper | 0 | 0 | The value of this object represents the operational state of this component. Common name: Operational |
1.3.6.1.4.1.637.3.1.5.1.1.8 | adnEquipX731Admin | 0 | 0 | The value of this object represents the administrative state of this component. Common name: Administrative |
1.3.6.1.4.1.637.3.1.5.1.1.9 | adnEquipX731Usage | 0 | 0 | The value of this object represents the usage state of this component. Common name: Usage |
1.3.6.1.4.1.637.3.1.5.1.1.10 | adnEquipX731Avail | 0 | 0 | The value of this object is a bitmap that qualifies the value of the operational and administrative states. When the value of thi… |
1.3.6.1.4.1.637.3.1.5.1.1.11 | adnEquipInstallStatus | 0 | 0 | The value of this object provides additional information concerning the availability status (adnEquipX731Avail) of the equipment.… |
1.3.6.1.4.1.637.3.1.5.1.1.13 | adnEquipControlHistory | 0 | 0 | The adnEquipControlHistory object is a bitmap that provides information about the cause of the last restart, switchover to spare … |
1.3.6.1.4.1.637.3.1.5.1.1.14 | adnEquipControlOptions | 0 | 0 | The adnEquipControlOptions object provides a mechanism for controlling future reactions of the equipment. It is a bitmap of opti… |
1.3.6.1.4.1.637.3.1.5.1.1.15 | adnEquipSwitchoverOptions | 0 | 0 | The adnEquipSwitchoverOptions object provides the options in effect for the next switchover to spare. It is only significant for… |
1.3.6.1.4.1.637.3.1.5.1.1.16 | adnEquipTrapCause | 0 | 0 | adnEquipTrapCause contains the value of the adnEquipCause field in the last trap generated by the equipment. It indicates the sp… |
1.3.6.1.4.1.637.3.1.5.1.1.17 | adnEquipX731StandbyStatus | 0 | 0 | The adnEquipX731StandbyStatus object describes the role of spare equipment. In particular, it indicates whether the equipment is… |
1.3.6.1.4.1.637.3.1.5.1.1.18 | adnEquipSwitchbackOptions | 0 | 0 | The adnEquipSwitchbackOptions object provides the options in effect for the next switchback to primary. It is only significant fo… |