The adnEquipSwitchoverOptions object provides the options
in effect for the next switchover to spare. It is only
significant for primary equipment; its value is 'noSwitch'
for spares and equipment that does not support redundancy.
other : not used
noSwitch : used for spares and equipment that do not
support redundancy
coldManual : used for primary MSC, CIG and BBASE card
coldAutomatic : used for primary MSC, CIG and BBASE card
warmAutomatic : used for Control Unit and BBSYN card.
The switchover is cold when the software is not already
loaded onto the card; it is the case for MSC coupler,
CIG and BBASE card. Otherwise, the switchover is warm.
With the manual option, the switchover is performed only
on operator request. With the automatic option, the
switchover is performed on HSS supervision software
request when a card is failed or on operator request.
Parsed from file hss1100adn.mib.txt
Company: None
Module: ADN-MIB
The adnEquipSwitchoverOptions object provides the options
in effect for the next switchover to spare. It is only
significant for primary equipment; its value is 'noSwitch'
for spares and equipment that does not support redundancy.
other : not used
noSwitch : used for spares and equipment that do not
support redundancy
coldManual : used for primary MSC, CIG and BBASE card
coldAutomatic : used for primary MSC, CIG and BBASE card
warmAutomatic : used for Control Unit and BBSYN card.
The switchover is cold when the software is not already
loaded onto the card; it is the case for MSC coupler,
CIG and BBASE card. Otherwise, the switchover is warm.
With the manual option, the switchover is performed only
on operator request. With the automatic option, the
switchover is performed on HSS supervision software
request when a card is failed or on operator request.
Parsed from file ADN-MIB.mib
Module: ADN-MIB
Vendor: Alcatel-Lucent (previously was 'Alcatel Data Network')
Module: ADN-MIB
[Automatically extracted from oidview.com]
adnEquipSwitchoverOptions OBJECT-TYPE SYNTAX INTEGER { other(1), noSwitch(2), coldManual(3), coldAutomatic(4), warmAutomatic(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The adnEquipSwitchoverOptions object provides the options in effect for the next switchover to spare. It is only significant for primary equipment; its value is 'noSwitch' for spares and equipment that does not support redundancy. other : not used noSwitch : used for spares and equipment that do not support redundancy coldManual : used for primary MSC, CIG and BBASE card coldAutomatic : used for primary MSC, CIG and BBASE card warmAutomatic : used for Control Unit and BBSYN card. The switchover is cold when the software is not already loaded onto the card; it is the case for MSC coupler, CIG and BBASE card. Otherwise, the switchover is warm. With the manual option, the switchover is performed only on operator request. With the automatic option, the switchover is performed on HSS supervision software request when a card is failed or on operator request." ::= { adnEquipEntry 15 }
adnEquipSwitchoverOptions OBJECT-TYPE SYNTAX INTEGER { other(1), noSwitch(2), coldManual(3), coldAutomatic(4), warmAutomatic(5) } ACCESS read-write STATUS mandatory DESCRIPTION "The adnEquipSwitchoverOptions object provides the options in effect for the next switchover to spare. It is only significant for primary equipment; its value is 'noSwitch' for spares and equipment that does not support redundancy. other : not used noSwitch : used for spares and equipment that do not support redundancy coldManual : used for primary MSC, CIG and BBASE card coldAutomatic : used for primary MSC, CIG and BBASE card warmAutomatic : used for Control Unit and BBSYN card. The switchover is cold when the software is not already loaded onto the card; it is the case for MSC coupler, CIG and BBASE card. Otherwise, the switchover is warm. With the manual option, the switchover is performed only on operator request. With the automatic option, the switchover is performed on HSS supervision software request when a card is failed or on operator request." ::= { adnEquipEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.637.3.1.5.1.1.1 | adnEquipType | 0 | 0 | The type of component this entry represents. 1 - other 5 - chassis 2 - node 6 - processor 3 - card … |
1.3.6.1.4.1.637.3.1.5.1.1.2 | adnEquipIndex | 0 | 0 | The index of the component this entry represents. |
1.3.6.1.4.1.637.3.1.5.1.1.3 | adnEquipSubType | 0 | 0 | A more specific indication of the type of component this entry represents. For example, when adnEquipType is 'card' adnEquipSubTy… |
1.3.6.1.4.1.637.3.1.5.1.1.4 | adnEquipLastChange | 0 | 0 | The value of sysUpTime at the time the component entered its current operational state. If the current state was entered prior t… |
1.3.6.1.4.1.637.3.1.5.1.1.5 | adnEquipInitTime | 0 | 0 | The time the component initialized with respect to the initialization of the local network management subsystem measured in hundr… |
1.3.6.1.4.1.637.3.1.5.1.1.6 | adnEquipTrapEnableMask | 0 | 0 | The value of this object is a bitmap that indicates which states and statuses should cause an adnEquipStatusChange trap to be sen… |
1.3.6.1.4.1.637.3.1.5.1.1.7 | adnEquipX731Oper | 0 | 0 | The value of this object represents the operational state of this component. Common name: Operational |
1.3.6.1.4.1.637.3.1.5.1.1.8 | adnEquipX731Admin | 0 | 0 | The value of this object represents the administrative state of this component. Common name: Administrative |
1.3.6.1.4.1.637.3.1.5.1.1.9 | adnEquipX731Usage | 0 | 0 | The value of this object represents the usage state of this component. Common name: Usage |
1.3.6.1.4.1.637.3.1.5.1.1.10 | adnEquipX731Avail | 0 | 0 | The value of this object is a bitmap that qualifies the value of the operational and administrative states. When the value of thi… |
1.3.6.1.4.1.637.3.1.5.1.1.11 | adnEquipInstallStatus | 0 | 0 | The value of this object provides additional information concerning the availability status (adnEquipX731Avail) of the equipment.… |
1.3.6.1.4.1.637.3.1.5.1.1.12 | adnEquipControlStatus | 0 | 0 | This object provides a mechanism for controlling the status of the equipment. Its value is a bitmap of controls that determine th… |
1.3.6.1.4.1.637.3.1.5.1.1.13 | adnEquipControlHistory | 0 | 0 | The adnEquipControlHistory object is a bitmap that provides information about the cause of the last restart, switchover to spare … |
1.3.6.1.4.1.637.3.1.5.1.1.14 | adnEquipControlOptions | 0 | 0 | The adnEquipControlOptions object provides a mechanism for controlling future reactions of the equipment. It is a bitmap of opti… |
1.3.6.1.4.1.637.3.1.5.1.1.16 | adnEquipTrapCause | 0 | 0 | adnEquipTrapCause contains the value of the adnEquipCause field in the last trap generated by the equipment. It indicates the sp… |
1.3.6.1.4.1.637.3.1.5.1.1.17 | adnEquipX731StandbyStatus | 0 | 0 | The adnEquipX731StandbyStatus object describes the role of spare equipment. In particular, it indicates whether the equipment is… |
1.3.6.1.4.1.637.3.1.5.1.1.18 | adnEquipSwitchbackOptions | 0 | 0 | The adnEquipSwitchbackOptions object provides the options in effect for the next switchback to primary. It is only significant fo… |