The conceptual row of the Nest Configuration table. A row in this
table can not be created or deleted. A row in this table can be
modified by providing valid values for either the Nest Name,
Configured Nest Type, NDR Capability, Alarm Contacts, Dual SMCs,
Dual XLCs or XCCs, or Nest Command Status.
Deleting the Nest Configuration using the Nest Command Status
value of 'delete-nest-config' will result in the removal of all
configured slots, ports, & connections associated with that nest number.
The xNestCmdStatus field must be included as a variable in a
SET PDU for the action to take effect. If the xNestCmdStatus is
missing from the SET PDU, the GET RESPONSE will contain the SNMP error
status of 'genErr' for and an error index equal to the last variable.
Parsed from file ERI-DNX-NEST-SYS-MIB.mib
Module: ERI-DNX-NEST-SYS-MIB
Vendor: Eastern Research Inc.
Module: ERI-DNX-NEST-SYS-MIB
[Automatically extracted from oidview.com]
xNestCfgEntry OBJECT-TYPE SYNTAX XNestCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The conceptual row of the Nest Configuration table. A row in this table can not be created or deleted. A row in this table can be modified by providing valid values for either the Nest Name, Configured Nest Type, NDR Capability, Alarm Contacts, Dual SMCs, Dual XLCs or XCCs, or Nest Command Status. Deleting the Nest Configuration using the Nest Command Status value of 'delete-nest-config' will result in the removal of all configured slots, ports, & connections associated with that nest number. The xNestCmdStatus field must be included as a variable in a SET PDU for the action to take effect. If the xNestCmdStatus is missing from the SET PDU, the GET RESPONSE will contain the SNMP error status of 'genErr' for and an error index equal to the last variable." INDEX { xNestIndex } ::= { xNestCfgTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.644.2.4.1.11.1.1.1 | xNestIndex | 0 | 0 | The nest index number in the node. Nests are indexed 0 through 7 but correspond to Nests 1 to 8. |
1.3.6.1.4.1.644.2.4.1.11.1.1.2 | xNestUnitName | 0 | 0 | The user defined name for this nest. |
1.3.6.1.4.1.644.2.4.1.11.1.1.3 | xNestType | 0 | 0 | This is the nest type configured by the user. The value, notConfig(0), is the default type for an unconfigured device. Note, i… |
1.3.6.1.4.1.644.2.4.1.11.1.1.4 | xNestState | 0 | 0 | The current machine state of the Nests. mismatch (2) Nest is configured as wrong type. notPresent (8) Nest is unconfigured. mis… |
1.3.6.1.4.1.644.2.4.1.11.1.1.5 | xNestAlarmStatus | 0 | 0 | The current nest device alarm condition level that indicates it's severity. |
1.3.6.1.4.1.644.2.4.1.11.1.1.6 | xNestDeviceCards | 0 | 0 | The number of device cards presently active in the nest. |
1.3.6.1.4.1.644.2.4.1.11.1.1.7 | xNestNDRCapable | 0 | 0 | The configured N+1 Redundancy state of the Nest. no (0) N+1 Redundancy is not available in the Nest. yes (1) N+1 Redundancy… |
1.3.6.1.4.1.644.2.4.1.11.1.1.8 | xNestAlarmContacts | 0 | 0 | Determines the type of desired response from the rear SMC/XNM Alarm Contact switches during an alarm event. |
1.3.6.1.4.1.644.2.4.1.11.1.1.9 | xNestDualSMCs | 0 | 0 | The number of SMCs configured for the Nest. If running with only a single SMC, this should be set to 'no' in order to suppress un… |
1.3.6.1.4.1.644.2.4.1.11.1.1.10 | xNestDualXccXlc | 0 | 0 | The number of XCC devices configured for the Node Manager or number of XLC devices configured for the Nest Manager depending on T… |
1.3.6.1.4.1.644.2.4.1.11.1.1.11 | xNestCmdStatus | 0 | 0 | The command status for this nest configuration row/record. The value used in a SET will be replaced by a response value in the GE… |
1.3.6.1.4.1.644.2.4.1.11.1.1.12 | xNestDualPower | 0 | 0 | The number of DNX Power Supplies configured for the Nest. If running with only a single Power Supply, this should be set to 'no'… |